Это видео недоступно.
Сожалеем об этом.
N54 ALUMINUM INTAKE MANIFOLD INSTALL | Jackspania racing
HTML-код
- Опубликовано: 17 сен 2022
- Installing this nice intake manifold from jackspania racing. Has a nice finish to it and good Fitment. If you guys have any questions just comment down below.
Background beat : • [FREE] '' Trust No One...
(Prod.Buddha Vybez)
dude your car is soo sick man, I am happy that I came across your page. You got a new Sub!!!!!
Thanks man, stay tuned for a DIY motor build coming soon.
Awesome work, looks amazing
Nice work
But bro do u really driving it without air filter ? 💀
Looks great
Have the same plenum but Phoenix Racing & it’s black. I put a phenolic spacer in between my head & plenum from Precision Raceworks. They say it doesn’t make a difference. But I don’t like the idea of the hot aluminum head & an aluminum plenum bolted together. It helps with IAT’s as well! Kinda common sense to me….😂 If you ever decide to go that route, save those extended studs…✌🏻🏁
I see what your getting at and I know about the spacer as well. The difference is very minimum as I asked a few people who used it. But at the same time it dose have a benefit with heat soak and slight cooler iats. I would probably run into some clearing issues if I ran it 😂
@@941garage Yeah I guess it’s a 50/50 kinda thing. It just makes a lot of sense to me & I know heat is the enemy when trying to make H.P. Shouldn’t have no clearance issues you already had a 1/2 inch port injection plate in there…😂🏁
Looks clean as man
Would i have any issues if I leave the long studs?
Sounds like you need to look into the G series turbos from Garrett. You would be able to pick up a same overall size turbo or even a little smaller than the 3584RS you were after but flow enough to make over 1000hp
I was thinking about the g35 1050.
@@941garage i would imagine that would be perfect. Considering they made them much smaller it would be hard to not for the Gseries. Unless space isnt an issue then maybe its a different story. Keep us updated on what turbo you end up fitting
@@jasonmeyer3206 thanks, yep I’ll make a video once i pick out the turbo. Maybe even the complete install.
Looks 🔥🔥🔥
Can you post again already? Your videos are fire tbh
Is the car platinum bronze metallic? Great looking motor dude
I don't know if this is a dumb question but, are such intake manifolds built for turbo cars only or can I install them on an NA motor also?
Yo! I wound up having to send my vader manifold back because of fitment issues, turns out yours was revised and mine wasnt. However, if you are getting rid of the vader kit, any way i can buy the downpipe off of you?
Dope
somebody explain to me the secondary fuel rail he installed
she is pretty, jackspania wuz here
Where can I get the fuel line
Would this manifold fit on an n53 engine and what is the approximate boost of power from running a custom intake manifold on this engine?
Idk if it will fit in the n53. This manifold is aluminum which is a lot stronger then plastic, but over all the stock plastic manifold works just as fine.
do i need to get port injection to upgrade the manifold, because I have been thinking about replacing the oem intake manifold but not to to sure how everything will go, and what brands do you recommend? (btw love the car man, looks beautiful, keep up the solid work and keep grinding.)
Thanks man I appreciate it. Yes you can definitely run this manifold you just need to find some plugs to plug up the ports.
Were you able to find what plug would be needed to fit in the injector ports? I believe it’s out there but idk where to start looking as in terms of the name
@@manlikeghidorah1994 did you ever find out ?
@@manlikeghidorah1994 burger motorsport sells the plugs, where the injectors go if you just want the manifold and don’t plan on running the port injection.
@@universlty1780 burger motorsport sells the plugs, where the injectors go if you just want the manifold and don’t plan on running the port injection.
Heyt bro are you using Phenolic Spacer? Do I even need to? I bought this manifold!
No I’m not, I doubt you need it you’ll be fine.
Have you had any trouble with the throttle body running no bov? I was told if you don’t run one it would hurt your throttle body since it’s electronic
No problems so far but I can see how it might have some affect on it.
@@941garage how long have you had it like that?
@@MrJulio277 for about 15k miles now. I also ran no bov when I still had stock turbos for about 6k miles.
Did you keep the stock intake studs to fit the new intake manifold
Yes
Hey man question did u have any issues with the manifold touching the oil fliter housing bolt when installing. Thanks
No I had no issues at all.
@@941garage strange ive got the vargas center manifold and am having issues with oil fliter housing bolt hitting the manifold
@@abrahimtahir2470 yah I heard VTT products aren’t the best.
@@941garage yea dam shame. So u would recommend this product from jackspania racing. Thanks
@@abrahimtahir2470 I mean yah it’s cheap, looks nice, and I had no issues with it fitting in the car.
Okay it might be a stupid Question, but my knowledge about fuel and shit is so wack, can you install such manifort with port injection, while runing only pump gas? Lets say RON 95 without issues, and if so, are there any benefits from it?
You can can definitely just run port injection with just pump gas. So let’s say you want to increase your boost pass the limit of your stock DI system. The port injection will help you with additional fueling needed.
@@941garage Thanks for the answer! 👍
@@941garage Tuning is required after installing such manifold, or the car will adapt by itself?
@@jacob997k my tuner told me that tuning was not required
What heat wrap is that I’m want a silver one cus gold ugly asf
Lol, go and Amazon and just type in reflective heat pad. Should give you a few options
Hope that cover doesnt seep oil through the pores.
Yah I heard that’s possible, but idk yet I’m still thinking if I will run that valve cover or not.
@@941garage they also happen to warp where the gasket goes.
What kind of quality is jack spania
Best in the world duh
Ain’t this the knock off manifold ?
Knock off of what?
@John Smith if you talking about the intake manifold then yes it is, its the same ebay/phoenix racing manifold that they all come from the same source just sold by different companies but all made in china.
They are all basically the same quality or product. I have a "deep motor" brand or whatever that looks exactly the same that has given me no issue for over a year. Just curious if those front facing intakes are any better flow but they seem to take up a ton of room.
They all come from the same place! I have a black one from Phoenix Racing. But this polished one, mine & the Black Market Parts are all the same. Black market Parts has meth bungs welded on the runners though! Best looking plenum in my opinion. I don’t care for the Doc Race one, it’s like a tank & cast aluminum. Not a fan of cast aluminum…✌🏻🏁
Message me for a deal on a pulsar ceramic dual ball bearing t4 twin scroll as well
How do I contact you? I’m interested