Honda GX160 Starter Service
HTML-код
- Опубликовано: 2 ноя 2024
- This video is another in a growing line of educational videos used by my student's to learn how to repair small engines. The Honda GX160 engine is a common engine and this video will instruct you in how to repair the pull starter on this engine.
Thanks! I had a broken gx200 starter pull that I rebuilt from your video. Work's like new now. Saved me $75.
Thx. Yours is best on RUclips. Plain, simple, no garbage.
This mower has been kicking for about 10 years now. Always had a short cord on it after the original snapped and other minor issues with the recoil starter ruclips.net/user/postUgkx-NCBSqqKJlyQ5_JGS_STpsFYihe7bmM3 until I finally had to open it up in an attempt to feed in a new line. I noticed it was all rusty and the coil was going but upon dismantling it was too much of a pain to get it all back in there correctly and opted to just get a new one. not sure why i waited so long to do so but it was a cheap, easy fix and it would have saved me hours of fiddling with the old rusty coil or trying to pull start and having cheap make-shift lines break in my hand during a pull. If yours is scuffed just replace it!
This helped me immensely. There are many videos on replacing the cord but not about assembly/disassembly of the starter itself. Well let's just say when I opened mine due to a jam, I was not expecting the metal band spring to explode into a giant tangled ball. Needless to say, trying to brute force the coil back into shape is impossible. Doing it with the method in the video is the only way I was able to do it 😅
First time having to replace a broken pull cord, would have been a bear without this tutorial, saved me lots of grief! Thank you!! :)
Thank you so much!!! This definitely kept us able to finish out the work we started. Truly appreciate you!
Excelente docente este profesor. Aun sin saber su idioma he aprendido la lecciòn. Mil gracias por enseñarme y que Dios te dè larga vida para que siga enseñando a miles de personas para que tengan una profesiòn de que vivir y educar su familia.
Yo tambien solo con ver he aprendido saludos
Stellar! No frills and additional comments. Straight forward! Thanks my friend.
Very versatile video. The direct, simple approach was perfect. All I needed to do is change the cord. Thank you.
Thanks so much for this video! My dad was frustrated with the spring and put me on the project. I tried for a few minutes before deciding I could look for a video tutorial. This was perfect - very clear, concise instructions without any chit chat! Got the motor running in 15 minutes. Cheers!!
Thank you! I was about to break something after fighting that recoil spring for a couple of hours but the tip about just positioning the center coil end correctly before remounting helped immensely 👍
I have heard your complaints about the background music, so I deleted the old version of this video and replaced it with one with no background sound. Hope you enjoy it.
motoprof1441 por que esta duro el gendo
I wish this video had some folksy background music to help drowned out the voices screaming in my head.
What size socket do you use the take the 3 bolts out
@@jacobycampbell8834 10mm
Thank you!!!!!!
I was about to try this when I decided to spray a generous amount of WD 40 into the coil and let it sit for a day. The next day the rope pulled back into place and it now works fine. You may want to try this before taking the pull starter apart.
Top video, this saved me a discussion with the hire place.
Teşekkür ederim. Sayenizde sadece 0.50 TL'YE işlem tamamdır. Ben Otomotiv teknikeriyim, starter ipi hiç değiştirmedim. Motorlu testerelerde de aynı sistem var. Hiç uğraşmadan direk yeni starter alıp çok paralar veriyorduk. Çok basit bir işmiş. Teşekkürler.
Thanks for this video. Bending the spring solved my issue. THX!
A no nonsense explanation. Thanks.
Gracias muy didactico el video (despues de mirar mi motobomba 2 años con el tirador cortado por fin lo he arreglado)
Thzat
Very informative, concise and comprehensive. Thank you very much
Thank you so much, I couldn't have done it without your video, frank new zealand
Love the video easy to follow however that black plastic circle is giving me some serious issues! It's unscrewing the screw holding it down when i pull the cord! Please help!
Thanks a bunch for this video. I guess I rotated it the wrong way and broke the spring. I was here looking at how to do it the right way.
Now that’s how you make a great video. Great job.
Gracias🙇
watch many videos. until I found yours and it was he who gave me the request... Thanks👍
Do u no the part numbers for the return springs an friction spring in the paw
Thanks I was having a really hard time with this and you cleared it right up!
Great video also only one I seen this detailed
Excelente esplicacion aunque no sé el idioma pero entendi el trabajo perfectamente gracias
Champion. Thank you
Excellent!
Thank you sir, very helpful
thanks. ..it is very useful for us villagers
Great tutorial! I want to change the orientation of the module so that the cord handle is at 2 oclock and not at 10. Since I placed the generator in a soundproofing box it become very uncomfortable to manipulate the handle from behind at start engine time. Btw as well as yours my recoil cover has 6 holes of which only 3 are used. If this possible to do without affecting the starting operation?
I've noticed the same thing on a bunch of these engines. Only those three holes are threaded too, btw. I think they have captured nuts welded on the back of the hole. I'm sure they're fine as they are. Perhaps the plate or starter is designed to fit a bigger motor, which would thus have need of more holes. I have owned several snowmobiles with much bigger engines and they have had up to six or more holes filled, if I remember correctly.
Thank you so much sir ❤️❤️👍
Nice video, helpt me out a lot
Excellent to-the-point video. Thanks.
I'm trying to make out from the video if the threads on the screw are normal or reverse thread? Are you turning it Counter Clockwise to remove the screw or Clockwise? Mine is stuck and I'm afraid to break the screw if I put too much force on it the wrong way. It looks like CCW here, as per normal, but because the engine runs in the same direction (and thus vibration might back off the screw), I thought this screw would be reverse threaded. Thanks.
It's a lefty loosy, righty tighty. 😆
@@motoprof1441 Thanks, Bud. Wonder if its been locktited in? Its pretty tight. I think the spring is intact, but it slips whenever I try to tension it beyond what it is retracting the cord half way.
Thank you so much. Your video is usefull!
Thanking you so much
great video followed all the way no problems now thanks!
Very helpful. Thank you. Sorted out what I was doing wrong with reassembly and got me going again.
Good video
Thanks brother good understanding.
Thank you so much sir
Thank you so nice 👌❤️❤️ it's working
What if the writing is upside down so I can start the machine from a different angle? Upside down writing affects anything?
If the writing was upside down, only people in aircraft would be able to read it ;-)
Haaha! Awesome!
Ok thanks so very very good
Thanks
What do I do if the ratchet guide is stuck
This helped me. Thanks alot
Apna amazing lord Brahma
7866003312
When I try to remove the 3 nuts with a 10mm ratchet the nut keeps on spinning. Help ! What can I do ??
Try prying out on the back of the starter as you loosen the bolts. The threads on yours are stripped and prying out sometimes allows better threads to engage and then the bolt may come out.
@@motoprof1441 Thanks, I'll try your suggestion.
Muchas gracias 👍🏽
Trataré de hacer, ya que no puedo enredar el resorte y ajustar la cuerda
Top video thankyou
Thank you great master
Thank you 😎👍
Thanks for sharing👍🏿
Use menos q lo q El dijo no tuve q sacarle las piecitas q El le saco pero exelente el vídeo tenga su buen like buen señor ojalá y le pudiera poner más q un solo like lo pusiera
Merci
Thanks brother good understanding .How we can set ignition timing in honda spray motars. upload animition
How many prices.....?????
Bueno días me gustaría que sí pudiera hacer un favor tengo un motor de arranque que no me recoge muchas gracias 🙏🙏
Where is the detailed work sheet
Oops, I never made it.
Best
what size bolts are those?
10mm
Klau beli alatnya ada
Good
I love you
This is a lot harder then you think better off just replacing it for $20AUD for a kit that comes with a starter and a few other goodies off eBay
THIS IS NOT HOW YOUR INSTALL A START SPRING
Why don't you share your expertise or video on the "correct way" to do it?
Thank you so much sir ❤️❤️❤️👍👍
Thanks
Thanks