This is why I bought your product. I read the email this morning about the zombie rings and wondered when a RUclips video would be out and here it is. Keep up the great work.
I purchased TAB 2/2 Header with the Zombie Slip ons--on my 2019 CVO Street Glide...I think I am going to add the Z rings---the bike sounds great, but now with a bit of restriction it should be complete---thank you!
Been running tab bam sticks with zombie baffles for 2 years and 20k miles the mufflers still look brand new the welds are amazing and the sounds still gives me that shit eating grim every time I fire her up
Our Indian, 19 Springfield Dark Horse, is currently at the tube bender getting fitted for testing on the new header. Once we get the bike back we will be getting into that right away, unfortunately we won't be swinging through to pick the bike back up until March. When we do, expect a lot more Indian content for sure across the board.
So it brings the stock bottom end torch closer to stock, I figured taking away the restriction would be an issue since the catalytic converter is in the muffler of the Harley touring models. I’m very interested in your product this is a game changer for my decision. 2020 Road Glide Special. Cheers Donny
It will but not really much if you have a CAT header still. It is more for the open systems, but the cat header if tuned correctly you should actually improve torque over stock.
Touring models don’t have cats in mufflers. Headers are merged into one collector with cat and then into two mufflers. Only Screaming Eagle full exhaust has cats in mufflers.
Question. I'm about to order the Zombie Rings with Torque Cones and I noticed the difference in the torque cones from the time this video was done to now. Do the current torque cones give you better numbers in the torque on the dyno? By the way, love my 4.5's with the 2.5 medium baffle. I will order the zombie baffles for the times I ride solo. Trying to keep my wife from going deef!! If I make her lose her hearing, she'll just yell at me louder!! LOL!
I wish I knew about these I have the bam sticks with zombie baffles on my stage 4 electra glide with true dual headers but running up the mountains started to wear on my ear drums so I ended up putting the tubes on a drill press and precision drilling a few holes in each one while also reworking the packing slightly so it actually works as somewhat of a muffler. It worked really well and still sounds the same just a little quieter. Definitely a fine american made product will buy more in the future for my other bikes
So I have a new 2022 Roadglide Special, which I just purchased your .50 Cals with the Zombie baffles for, and also your 2-1-2 headpipes. One, do you even make these rings for the .50 and two, would there be any reason to get or not to get these for my set-up?
Yes we do make them for the 50 cals and yes you will get a little more restriction, they will help on the low end by moving some of the power to the lower RPMs and they look great. The reason not to would be they do alter the sound minimally and not everyone likes the difference, they also pull from the peak a bit on torque to give to the lower range, so if you don't spend time in the lower range it may feel different to you than someone who spends a lot of time in the lower RPM band.
So tell me please how can I do the same on my stock mufflers on my 2021 Harley Davinson Triglide Ultra Classic trike, it will be sounds like your bike , your bike sounds loud and amazing sounds, thanks for the video.💯💯💯💯💯😢💯👍
Hello, you would just need to go to www.tabperformance.com and purchase the zombie baffles. The Triglide uses teh 1995-2016 fitment 4" mufflers it will have a note for trike fitment up to 21.
We don't have a run without the rings on this video clip. We will be doing another clip with more combinations, for now you'd have to just go to our channel and find a clip of this bike with just the slip-ons.
The HP is pretty much the same a half point here or there as the chart progresses. The peak torque on our test actually dipped a little but was more consistent and the area under the curve was greater. There is no straight answer one number answer I can give you as each build, each bike, each rpm range, will change slightly. You can see the side by side charts on the photos we have for the product at the link below. www.tabperformance.com/zombie-rings-p/z-rings.htm
They are bare aluminum actually so you can paint them or do whatever you want. Most of the time they are going on bikes with no cat and will turn black from exhaust in a matter of a hundred miles so not much point in spending dollars driving up the price on a internal part.
I have installed the z rings and they ruined the sound of the zombie baffles. They cit out the throaty sound zombies have. I'm giving the z rings 2 thumbs down.
Sorry to hear they did not work with your preference. Customers do seem to either love them or go back due to liking the sound on zombies better alone. Doesn't seem to be a lot of in between.
This is why I bought your product. I read the email this morning about the zombie rings and wondered when a RUclips video would be out and here it is. Keep up the great work.
Just installed mine, not only was it super easy but they look better in person. Great job TAB Performance!!
Awesome! Thank you!
I purchased TAB 2/2 Header with the Zombie Slip ons--on my 2019 CVO Street Glide...I think I am going to add the Z rings---the bike sounds great, but now with a bit of restriction it should be complete---thank you!
Sounds great. Can't wait to install them on my CVO.
Right on!
Been running tab bam sticks with zombie baffles for 2 years and 20k miles the mufflers still look brand new the welds are amazing and the sounds still gives me that shit eating grim every time I fire her up
Thanks for this install video! I'll be putting mine in tomorrow
AWESOME you Guys ROCK / Placing my order now!!!
@Tab Performance. What's the chances we get a sound clip of the Zombie rings installed on the TS 111 for us Indian lovers out there?
Our Indian, 19 Springfield Dark Horse, is currently at the tube bender getting fitted for testing on the new header. Once we get the bike back we will be getting into that right away, unfortunately we won't be swinging through to pick the bike back up until March. When we do, expect a lot more Indian content for sure across the board.
Sounds good!
Are these for if you pull the baffles?
So it brings the stock bottom end torch closer to stock, I figured taking away the restriction would be an issue since the catalytic converter is in the muffler of the Harley touring models. I’m very interested in your product this is a game changer for my decision. 2020 Road Glide Special.
Cheers Donny
It will but not really much if you have a CAT header still. It is more for the open systems, but the cat header if tuned correctly you should actually improve torque over stock.
Touring models don’t have cats in mufflers. Headers are merged into one collector with cat and then into two mufflers. Only Screaming Eagle full exhaust has cats in mufflers.
Question. I'm about to order the Zombie Rings with Torque Cones and I noticed the difference in the torque cones from the time this video was done to now. Do the current torque cones give you better numbers in the torque on the dyno? By the way, love my 4.5's with the 2.5 medium baffle. I will order the zombie baffles for the times I ride solo. Trying to keep my wife from going deef!! If I make her lose her hearing, she'll just yell at me louder!! LOL!
Hey there, the rings are very similar, they are just more robust, it wasn't a performance change, it was a holding up in the field thing.
@@TABPerformance Thank you!
I wish I knew about these I have the bam sticks with zombie baffles on my stage 4 electra glide with true dual headers but running up the mountains started to wear on my ear drums so I ended up putting the tubes on a drill press and precision drilling a few holes in each one while also reworking the packing slightly so it actually works as somewhat of a muffler. It worked really well and still sounds the same just a little quieter. Definitely a fine american made product will buy more in the future for my other bikes
So I have a new 2022 Roadglide Special, which I just purchased your .50 Cals with the Zombie baffles for, and also your 2-1-2 headpipes. One, do you even make these rings for the .50 and two, would there be any reason to get or not to get these for my set-up?
Yes we do make them for the 50 cals and yes you will get a little more restriction, they will help on the low end by moving some of the power to the lower RPMs and they look great. The reason not to would be they do alter the sound minimally and not everyone likes the difference, they also pull from the peak a bit on torque to give to the lower range, so if you don't spend time in the lower range it may feel different to you than someone who spends a lot of time in the lower RPM band.
What mirrors are you running on that Streetglide??
Harley Low Profile Mirrors
Are the baffles out!
On the install video and sound test are those 4 inch or 4.5 and is it a stock head pipe ??
This one is 4.5" mufflers with our headpipe that is soon to be released
TAB Performance, Inc. so wouldn’t be great on 4 inch with stock head pipe ?? Maybe too much back pressure ?? I love my Tans !!!
Sounds awesome!
Thanks!
Does it help with reversion
So tell me please how can I do the same on my stock mufflers on my 2021 Harley Davinson Triglide Ultra Classic trike, it will be sounds like your bike , your bike sounds loud and amazing sounds, thanks for the video.💯💯💯💯💯😢💯👍
Hello, you would just need to go to www.tabperformance.com and purchase the zombie baffles. The Triglide uses teh 1995-2016 fitment 4" mufflers it will have a note for trike fitment up to 21.
@@TABPerformance thanks for the update
Will these work on m8 with stock slip ons with the baffles removed and stock header pipe with the cat removed?
Did I miss the run without the Rings ?
.. and how about a head pipe for the new Yamahas .. Eluder / SVTC :)
We don't have a run without the rings on this video clip. We will be doing another clip with more combinations, for now you'd have to just go to our channel and find a clip of this bike with just the slip-ons.
What color locktight are you using?
Zombie baffles need a larger bell end than just a 2.5" straight tube.
Did i hear you say that adding this makes the zobbies louder
It won't make them louder, but it does change the tone.
These on the 4 or 4.5"
We have for both.
@@TABPerformance I knew that, but are these ones in the video on 4 or 4.5"? I already ordered 4" for my 2021 214.....but I'm just curious
4.5
Hey guys, what are the torque gains, and how much power would I lose on the top end, at highway speeds?
The HP is pretty much the same a half point here or there as the chart progresses. The peak torque on our test actually dipped a little but was more consistent and the area under the curve was greater. There is no straight answer one number answer I can give you as each build, each bike, each rpm range, will change slightly. You can see the side by side charts on the photos we have for the product at the link below.
www.tabperformance.com/zombie-rings-p/z-rings.htm
No the end cap doesn't make a difference
Why are these thing crome when going in a black pipe.
They are bare aluminum actually so you can paint them or do whatever you want. Most of the time they are going on bikes with no cat and will turn black from exhaust in a matter of a hundred miles so not much point in spending dollars driving up the price on a internal part.
I have installed the z rings and they ruined the sound of the zombie baffles. They cit out the throaty sound zombies have. I'm giving the z rings 2 thumbs down.
Sorry to hear they did not work with your preference. Customers do seem to either love them or go back due to liking the sound on zombies better alone. Doesn't seem to be a lot of in between.