your issue with liners dropping is not enough protrusion of your liners we cut snd shim till we are at max 0.014" and on modified engines we go 0.002" over max and that doesnt allow the liners to move/rock and where down the counterbores and thus drop and blow a gasket
Cool, but hardly a new concept. Split scissor gears have been used on primary drives in motorcycles for decades now. They are quite reliable despite resembling the much hated dual mass flywheels that have plagued cars over the last decade.
I wouldnt try to rebuild your motor yourself unless you know somebody that can help alittle bit when you get stumped. But you will save close to 20k of it runs when your done..warranty is still on parts unless its obviously your fault
This is way better than the Mexican videos I've seen on here! "Profesional'
This is my town not yours
cummins is so kind to you tube sharing information now adays.
I really miss working on the these but I’m 72 and its time
I need to give my special tools up
Excellent instructor
Got a 2015 cm 2350 with 1100 miles on it dripping coolant out of the back of the head . Looks fun
I tie two .010 feeler gages togather to run the lash.. I dropped the bottom one in the pan one time. Never again.
❤❤❤
Good
Cummins quick serve says the lash should be from .002 to .004
It's cool
your issue with liners dropping is not enough protrusion of your liners
we cut snd shim till we are at max 0.014" and on modified engines we go 0.002" over max and that doesnt allow the liners to move/rock and where down the counterbores and thus drop and blow a gasket
How to check , protrusion on six 15
Honda had this gear design in 1970s.
motorhead True Ossa had also
Okey tenkio
How to set timing for 4bd1 3.9 engine
How to assemble the injector camshaft gear? If the gear spring bolt loosened (4 bolts), so, 4springs can not copression.
전성호 6:10
donde puedo conseguir las herramientas para poner en tiempo los arboles de leva del motor isx.... cuanto cuestan
Vienes de fabrica se llaman cuñas tenés de distintas medidas para distintos tipos de motores .
ceramic plungers in injection pump the main disaster.
Thats isx15 with high pressure fuel pump. Ceramic plungers in pump head.
2010
what happens if there is a problem in the front gear train? (does it make the engine make more sound or make it smoke or something)
😂
Diesel Truck Repair
ese motor lsx cummins q de la explicacion en español.
Quiero la aplicacion en español
Ellos solo dan explicaciones en inglés usa el traductor de google
compadre puedes dar la teoría en español xq no te entiendo
Cool, but hardly a new concept.
Split scissor gears have been used on primary drives in motorcycles for decades now. They are quite reliable despite resembling the much hated dual mass flywheels that have plagued cars over the last decade.
Hello ,, where can I order the serie of how to learn to rebuild my own Cummins ISX ??
I wouldnt try to rebuild your motor yourself unless you know somebody that can help alittle bit when you get stumped. But you will save close to 20k of it runs when your done..warranty is still on parts unless its obviously your fault
Fokin das
quien tiene las planchitas de poner en la barra de levas y el pin del cigueñal y cuanto cuesta
450$
I wone ....
looks lame to me because those gears with springs are look alike double mass flywheel - part that damaging itself after 100k miles