monorim ML01 kit mount guide handle bar -22mm Left and right turn signals lights

Shopping link :
monorim.store/...
monorim ML01 kit mount handle bar -22mm Left and right turn signals lights
1. Handle bar silicon protection light
2. Power from Dashboard compatible from 5v~72v
published by monorim manufacturer copy right 2020 year
00.55 Installation and wiring arrangement of the turn signal on the left side of the handlebar
01.39 Installation and wiring arrangement of the turn signal on the right side of the handlebar
02.46 The seven-shaped head is installed on the handlebar
03.33 Install headlights
03.59 Internal wiring layout
05.00 Line interface connection
06.26 Organize the wiring harness
07.08 Install subpanel and front end

[@DomenicoDaimaou]

I just installed this kit on my pro2 and although I am very happy with how it works, I would like to highlight some "negative" aspects that could be improved:
1) The indicators have a plastic structure onto which a metal screw is screwed which however damages the seat making it impossible to fix them to the handlebars. Personally, I managed to solve the problem by making a hole in the handlebar frame and using a screw that is used for PC fans to hold everything in place.
2) The indicator cable is positioned towards the outside, ideal for sliding the wire on the external part of the handlebar. However, this is a problem if you use the central tunnel, as the cable will hit the edge and will not allow correct positioning of the indicator.
3) The buttons do not register pressure correctly if pressed on the edges rather than centrally. It would have been better to use momentary buttons instead of on/off ones.
4) The two cables that start from the buttons and return to the handlebar using the brake input are truly unsightly. They could have been avoided by only bringing the button wires (i.e. 1 cable with 3 wires) in the same way as the accelerator or brake hall sensor cables and then managing the turn signal logic directly inside the handlebar...
Beyond these considerations, the kit is certainly very useful for signaling your intention to turn and avoiding (as far as possible) accidents, so don't do without it!

[@cgiacca]

Will these work with a Segway Ninebot MAX G30?

[@ItchyFingers-ee5oi]

A fellow Segway Max G30 owner here, I just measured the handle bar and it’s 22mm diameter so it should work? I just ordered the kit myself, fingers crossed.

[@Monorimofficial]

yeah , could work excellent compatible