Max Speed Jet-Water Pulse Motor pop pop.
HTML-код
- Опубликовано: 11 сен 2024
- This engine is for my Speed boat. The pulse drive is 30 x 60 mm and the tube are Ø = 3,8 mm inside and 18 cm long. Tuning - for more speed the tubes exhaust are only 3,0 mm inside.
My fastest engine.
![[DOKKAN BATTLE] Worldwide Campaign Announcement Video Part 2!](http://i.ytimg.com/vi/JpT5Voak6WA/mqdefault.jpg)
it remind me of those good days when we were kids playing with water boat.
Same good old days😧😊😊😊
Kapal tok tok, Indonesian called
yeah, i guess we on the same country 😂
What kind of boat is this???
What age group do you belong to???
Is this available in the shops now??
@@snagarathinam163 kind of small boat toys made of metal sheet, i think it's still exist till now but not as much as 20 years ago since electric motor and battery already cheap now, and you cannot find that in supermarket cause maybe don't have any safety certification and due to more fragile than most plastic toys usually buyer will test that before buying which mean they will burn some parts of it in order to turn it on, therefore this usually only sold in open area like park and roadside, if you're there you can easily find that by the very typical loud sound out of it
This is how a single cylinder 0 piston engine sounds like 😂😂😂
No it's 2 cylinder
Yeah, good one!"
It's 2 cylinder or 2 tube engine
No this is turbo Jet engine 😂
*German Scientists conduct lab experiments to improve Pulse Jet efficiency for future V1 Rockets, 1943 Colourized*
dean mckellar funny is this basically is like a water pulse jet..
dean mckellar I can appreciate memes like this where the creator obviously knows something about the time period. Hats off to you sir
Hitler awarded him fluttercruz after watching that video and executed him after valkyrie.
Knatterboot
Lol this is not Peenemünde
30 years back I had a metal toy ⛵ with this same engine. hmm.. those days sweet memories.!
Kapal Otok Otok Indonesia
1:40 VTEC just kicked in yo!
@hotpockets222 hondas variable timing electronic controll
Dat fake checkmark tho
@hotpockets222 exactly
Lol Honda’s
R.I.P he was a brilliant drummer. Dies way too damn young.
i had a boat with same mechanics .
brings back memories
In my country, we call it "kapal kotok-kotok"
In my country we call it papi chulick
That is to say very fun popping toy time
Me like
@@alexcahyameidian215 anjayyy
Sounds like a Honda
That's Not Me well now we know you drive a riced out Honda
Nice
Before VTEC kicks in. 😉
Sounds like your mom in the bathroom
Like a dog
I was curious if this thing from Ponyo was real. [VERIFIED]. thank you!
Hey I just gave u ur 69th like. lol😂
These are available in road side toy shops in india. The engine is part of a toy boat that moves in water.. They are available in india for a dollar or two.
Oh my gosh, as a kid I had these boats with the same setup. Forgot all about them and how they worked but as soon as I saw this thumbnail it all came back to me
Very cool. Never saw something like this before.
Damn it's sound like a Honda civic
*LOL 😂 THIS MECHANISM WAS IN MY CHILDHOOD TOY*
Ankit Kamli boat.... In exhibition
Nice toy
a ship...indian 19s
INDIA ROCKS
Ankit Kamli same here...and still in indian market
Its like the little ponyo boat engine
Absolutly
Omg you remind me ponyo thank you for saying that
now im going to watch it
Omg u was thinking that
Tidiest Flyer YES!!!!!!!!!!!
Yes, obviously some people have faithfully recreated the Ponyo boat on youtube, if you haven't bothered to look.
I wast just listening to the Ponyo OST when this popped up on my reccomendations, great!
My childhood toy, it's been 12 years I don't play that little boat.
I like how clean the final build ended up being. I'd actually be interested in purchasing one of your engines, if you were interested in selling.
loribit85 llkķjmkk
Come to India just 1 $
ill make one for you for $100
Come to india just $1 with boat body
Come to Mexico. it's free. We even give you money back. Best deal ever.
This is the best pop pop engine I’ve seen. Seems very robust. Others seem marginal.
Very neatly constructed, but hardly looks "robust" to me. More like thin and minimalistic.
the person who invented this ,was the blessed one
Seems like this could generate enough energy to power my entire house!
Мне дедушка ещё в 80 году делал кораблик с таким мотором.
Открыли науку в 2021!!!
Somewhere there's a little Scotty saying,"I'm giving her all she's got Capt!"
90,s kids enjoyed this alot
Yes, because that noise is so soothing lol.
Japan stole this advanced German technology back in the 70's and has been used on every Honda Civic since
Hats off for the name of the boat
We built a full size model and used whale blubber for the fuel source. We tied dolphins to the bow for steering. They kept diving and putting the flames out.
Thommy Two Toes Times Three You bastards!!!!!
Ted Nugent. Us bastards...on steeriods.
I dont give a damn bout the whales and dolphins but it mustve made a helluva racket.
Ted Nugent. Noise? We're workin' on a mattress that resembles the action of this type of fluttering movement. Lookin' for people to test 'em out.
Next time use baby dolphins.
Bachpan me aise boat the mere pas 10 rupye me milte the. Aag laga bade gamle me dhoba k ghumata tha
O bat yad aa gye
I built one of these boats when I was 12, 40 years ago. My dad flipped out when he saw me playing with it in the back yard. He said it reminded him of when he was in the Army in Korea the kids had them there and asked the Army guys for matches to light them.
1:06 overclocking the System. Shame on you!! haha
josegut85 why shame on it?
josegut85 he voided his warranty
tf niga
1:40 VTEC just kicked in yo!
It's just turbo mode.
Amazing! Sounds like a hit and miss engine
Man this is some really good Max Speed Jet-Water Pulse Motor pop pop.
Can this be upscaled to a 17 ft boat its got my mind ticking I shall look into folks
Remains me to my old day, playing thin boat toys
Amazing experiment... Sound like a motorcycle
Might be a stupid question, but I'm assuming the osalation is due to the heat expanding the diaphragm and the water being pulled in and cooling the diaphragm repetitively. My question is, what happens whenever the water reaches a certain temperature to not cool to diaphragm properly or is that an issue? Where is my entire idea of how it works incorrect?
Jesus love the steady hands
Hello, is there a water temperature limit for the system to work ? Does it work with hot water ? I'd like to try a solar heat pump to circulate water in my rain storage.... Thanks for any advice !!
So if you put a magnifying glass and center it the right way you can run this from the sun on a sunny non cloudy day?
It's our childhood toy..Even my daughter plays also
Nice, a good performing engine! Especially for an engine with a diaphragm.
The physic principle is not yet fully understood. The water is vaporized in the heated chamber. The 2 tubes suck and eject the water at the same time, but we don't understand why a toy boat can go forward with this system. The same phenomenon is used by squids to swim.
This video reminds my childhood 👍👍❤️❤️
What a coincidence I was just playing with the boat before watching this
How do you do it? Can you give us tips to reorocude it!
Datang ke solo ( surakarta) pas ada sekaten. Cara ini sudah ada di mainan kapal kapalan ( otok otok ) dr jaman dulu
In Indonesia such a system has existed since time before, since its ancestors. But for now it's only used for ship toys. We call it "the otok boat"
We had toy boats like this when we were small
Fascinating. I’d like to watch this go around and around until the candle burns out...
Журнал "Юный техник" за 1983 год.
How it works?, I mean what is the principal behind this
Heat flash boils water, expanding steam pushes water out pipes, steam cools creating vacuum, sucking water back to contact with heat. Repeat.
I had this consept ship in my childhood. We played a lot u could have bought it in 1 penny that time.......and still i can see it in indian market available for kids to play with them...
Motors just sound cool
This is my childhood TOy ..when I'm 1st standard my mom gifted me WATER BOAT .. SAME MECHANISM
В журнале моделист конструктор прим за 89 год был такой джет для лодки, так старался у дедушки в цеху латунь продавить шаром чтоб были мембрамы, недоделал. Конечно представляю такой катерок кто то же их доделывал в ссср и запускал. Оч интересно.
Can I add this as a supercharger to my j37.. Right before the throttle body?
The shaking of his hand adds 90% vibration to the steam engine lol
огонь, вода, и медные трубы......я никогда нестану прежним
Can this be scaled up for human sized boats? How many btu per hp is this system?
plot twist: the camera angle shows us that left side is a paid actor.
How does it works giving shown effect? What's the principle?
But why didn't you test it out, boat and all on the water ?
45 yıl önce bu sistem ile çalışan 30-35 cm uzunluğunda tenekeden yapılmış küçük bir motorlu sandal oyuncağım vardı. Mumu yakıp suya koyunca pıt pıt ederek giderdi, ilk denememde çaldırdım. İlkokul çağlarımda Adapazarı'nda yaşadım bu olayı.
beautiful experiment
This is my childhood small boat
Not sure how that's working because the inlet or output pipes are not shown.
How was this made??? I want to build a bigger one for a solar RC boat using a fresnel lens
why not explain the working principle?
Claudio Fonta channel why not use common sense?
Tyler Head this is a bit more complicated than common sense
Why not google?
Guys, hes right you know....
steam engine
So, is one tube an intake and another an exhaust?
No,No Both tubes are intake and exhaust at same time.
Is this supposed to help conserve energy and lower carbon emissions, or am I missing the point?
I had a small candle powered boat when I was a kid.
Iki nek neng indonesia, jawa tengah jenenge kapal otok othok, wes kat jaman mbah buyut...
What's the typical life expectancy on pop motors?
1mil pops cud get more with a oil change and blinker fluid installed
When I was a child I used to have a boat similar to this
You were really putting it to its limits by the way awsome
Could you make a video making this engine? I am looking to replicate the ship of a movie that several have commented, please make the video, it would help me a lot for the project I plan to do
Where did u get that from? I’d like to buy one
I think these are so cool.
Show a video of hire you built this. Great video btw
What did I just watch... Pretty cool actually
Miss my childhood
i had a boat with this system installed 50 years ago. still nothing wrong with that, as now we can steer using radio control, something not possible 50 years ago.
dugsey nikola tesla used radio signals to control a toy boat in 1898. Everything has become much smaller now though.
Miss childhood ship toys 😄
What is this sorcery?
Interesting. I suspect the heat source causing the metal to elongate and shrink repeaedly inducing an oscillation in the body which is then propagated to the water. Any more information on this? I would like to see a mathematical analysis of the dynamics.
Pau Gasolina first you fill it with water. It's called a boiler for a reason
Wow you’re so smart, elongate and shrink? I take that back...
The lighter is shaking so much. Is he deathgripping it or something?
How this Works and what metal Plate used
what would hapen if you add a teslavalve one one of the tubes ?
Ok...but whats the point? What good is it?
Sounds beautiful.
Memory from childhood.
Amazing. What if we use 2 motors at same time? Doesit sound like harley davidson?
I just wonder what a propane torch would do. Maybe it would be too hot?
Many articles on the Internet have been published for this purpose. It is said that when the engine's heat reaches the desired level, the water inside the tank turns into steam and, with the pressure of thin tubes, comes back out and drives the boat in the opposite direction. That's right up here. But to say that after that cold water enters the tank by itself is funny and ridiculous. When the expansion is heated, it only releases steam, but never fresh water. Water vapor pressure does not allow fresh water to enter.
They say wrong. It is said that one water pipe enters and another water vapor exits. The boat, however, will move even with a pipe.
How and what is that plate made of. I have to make that.
Please explain. 🙏🏼
How did you make it?
Crazy it sounds like an old 2 cylinder John Deere tractor.
How did you build that boiler? The membrane in what matter. Thank you
Could it be a fish can cover?
What is the purpose of this?
The flexing heating chamber sounds good but it's actually taking energy from the motor. If it was rigid it would produce more thrust.
Not necessarily. The flexing of the diaphragm pumps the h2o for the next heating cycle.
*THE MEMORIES!*