Hi guys, doing awesome job with perfect results, already tried your 2 formulations with very desirable results.. please make a video on Shampoo formulation, Ty
Hello all, if you want to get the detailed chart of this formula, please review our blog post: yeserchem.com/crafting-an-economical-high-foaming-handwashing-laundry-detergent/.
Instead of the AOS powder, can I substitute with AOS (35%)liquid. What will be the percentage? What percentage can we use by using the liquid surfactant AOS?
@@chikabel3282 🤦♂🤦♂🤦♂ I'm asking about this Formulation Steps: Aqueous Phase: Add 162.5g of deionized water. Stir in 2g of EDTA Disodium (0.1%). Add 8g of Caustic Soda (4%) to neutralize LABSA. Surfactant Phase: Add 6g of LABSA 96% (3%) and mix thoroughly. Incorporate 20g of SLES 70% (10%) for cleaning power and foaming. Mix in 2g of CAB 35% (1%) for enhanced foam and viscosity. Add 3g of AOS (1.5%) to boost foam and cleaning efficiency. Final Adjustments: Adjust pH with citric acid to a range of 7-8. Gradually add 5.4g of sodium chloride (0.27%) for desired viscosity. Add 2g of MIT/CMIT preservative (0.1%). Mix in 3g of fragrance (0.15%) and dye for the finishing touch.
Hi dear, we add 0.4% of caustic soda in this formula. In the video, we add 8 grams, as we are making a 200ml batch. And this is a laundry detergent liquid suitable for hand washing, instead of machine washing.
you can use Sodium Lauryl Sulfate (SLS) or Ammonium Lauryl Ether Sulfate (AESA). Both of these surfactants are anionic and can provide similar benefits such as good foaming properties and effective cleaning capabilities.
I love love the cleaning test at the end
Hi guys, doing awesome job with perfect results, already tried your 2 formulations with very desirable results.. please make a video on Shampoo formulation, Ty
Very good Formula And thanks for sharing this video
Nice working,
Hello all, if you want to get the detailed chart of this formula, please review our blog post: yeserchem.com/crafting-an-economical-high-foaming-handwashing-laundry-detergent/.
If I want to make an industry based on your chemicals then what support you will offer?
Can this serve for a dishwashing liquid?
How to thick more and more laundry detergent for door to door sales without packing. Please tell me as much as possible
Please what is the full name for AOS and CAB?
Hi @adzowegabriel77, it is Alpha Olefin Sulphonate and Cocamidopropyl Betaine.
Instead of the AOS powder, can I substitute with AOS (35%)liquid. What will be the percentage? What percentage can we use by using the liquid surfactant AOS?
to substitute AOS 35% Liquid, you will need 3.94% of it based on equivalent percentage computation against 1.5% OF AOS 92% used in this formula.
Thank you so much
Kindly how make woolen liquid detergent
8:42 surf excel matic Detergent liquid formula please
Thans for ans
Why not used enzyme in the formulation?
Yes we can add Enzymes in the formula. This perticular formula is an economical formula for low-income markets.
Hi Yeser team, Which is better between EDTA 2NA or GLDA for chelating agent ?
GLDA has a slightly lower chelating ability than EDTA-2Na, however, it's more eco-friendly.
@@yeserchemicalshow abt STTP compared to EDTA?
Please make a surfactant highly foam
Please make a video on oxy bleach formulation detergent powder/ liquid detergent
How many rpm should be the motor of the mixer machine?
for the overhead stirrer, we set the RPM from 250-300 rpm in this formula
If we add too much sodium chloride to the detergent formula, will it reduce the cleaning power of the formula?
Sodium chloride does not affect the cleaning power. However, it does affect the foaming of the formula a bit.
too much salt as thickener will neutralize the cleaning ability of the detergent, use below 3%.
What is CAB😊
Hi dear. Please kindly refer to this link on our website: yeserchem.com/cocamidopropyl-betaine/ for detailed information about CAB.
We usually neutralize every 10 grams of LABSA with approximately 1.28 grams of sodium hydroxide. Why is there a big difference in these ratios?
because she only added 6 g of labsa hence only 0.8 g of NaOH was added 🤦♀️🤦♀️🤦♀️ slightly above 1 equiv.
@@chikabel3282 🤦♂🤦♂🤦♂ I'm asking about this
Formulation Steps:
Aqueous Phase:
Add 162.5g of deionized water.
Stir in 2g of EDTA Disodium (0.1%).
Add 8g of Caustic Soda (4%) to neutralize LABSA.
Surfactant Phase:
Add 6g of LABSA 96% (3%) and mix thoroughly.
Incorporate 20g of SLES 70% (10%) for cleaning power and foaming.
Mix in 2g of CAB 35% (1%) for enhanced foam and viscosity.
Add 3g of AOS (1.5%) to boost foam and cleaning efficiency.
Final Adjustments:
Adjust pH with citric acid to a range of 7-8.
Gradually add 5.4g of sodium chloride (0.27%) for desired viscosity.
Add 2g of MIT/CMIT preservative (0.1%).
Mix in 3g of fragrance (0.15%) and dye for the finishing touch.
The neutralization ratio (labsa:caustic) is 1:0.11881.
This is correct ratio
Why it is hand wash ,we can use it in mascine ??
This is a high-foaming formula. It can be used in top-load machines. However, it's not so good for front-loading machines.
@@yeserchemicalswill you make a video for the front loading machine?
Please make a formula for front loading machines
Pl confirm caustic soda quantity & this formula is Hand wash or laundry detergent
Hi dear, we add 0.4% of caustic soda in this formula. In the video, we add 8 grams, as we are making a 200ml batch.
And this is a laundry detergent liquid suitable for hand washing, instead of machine washing.
@@yeserchemicals thanks so much kind of information
@@yeserchemicalsso what to I add to make it suitable for machine
@@yeserchemicals Sirs/Madams, not 8g but it is 0.8g.
@@kassahunbirru Hi dear, thanks for the correction. yes you are right. It's 0.4%*200=0.8grams. Apologize for our mistakes.
Hi please make videos on skin care formulations like lotions, creams and serums etc
Can I have copy of formulation
hi dear, yes please send an email to tech@yeserchem.com. Our lab. team will send you the formula in PDF.
Hola quisiera poder tener la información gracias una copia de la fórmulas gracias@@yeserchemicals
What is the alternative for AOS
you can use Sodium Lauryl Sulfate (SLS) or Ammonium Lauryl Ether Sulfate (AESA). Both of these surfactants are anionic and can provide similar benefits such as good foaming properties and effective cleaning capabilities.
Labsa, caustic are not using in handwash. Its is not suitable for handwash