iMac 27" Fan spins 9 beeps and shuts back off. Let's fix this.
HTML-код
- Опубликовано: 10 сен 2024
- ⭕ Ask questions and Engage in our Forum at northridgefix....
⭕ Need a repair? northridgefix.c...
⭕ Visit our ecommerce shop and buy all your tools at northridgefix.com
⭕ We are an Amtech Flux Distributor. Buy AMTECH NC-559-V2-TF Flux
northridgefix....
Microscope northridgefix....
UNI-T UTi260B thermal Camera
northridgefix....
Grinding pen
northridgefix....
Low Melt Solder
northridgefix....
NorthridgeFix T-shirts
northridgefix....
Weller Soldering station ebay.us/1mvgt5
=================================================== If you are local, drop in and say hello
NorthridgeFix
19365 Business Center Drive, Unit 7
Northridge, CA 91324
Phone: 818-668-7058
NorthridgeFix.com
Such a great feeling when you fix something. You and a few others have inspired me to start repairing myself, and it is SO rewarding. Wish I could support you more, but I live in the UK. Keep up the great work.
I'm amazed all of your know how in many completely different hardware! I wish you live next door to me, I could learn something from you! Thanks for sharing!
I like the way his smile when he fix the problem and saying "awesome". 😁
If i fix that, ill be jumping high out of happiness. 🤣
Hold on let me just comb my beard. 😎
JOB IS DONE WHEN ALL THE SCREEN IS WORKING, OTHERWISE NO
ARAB 😎
Those beeps were Morse code... three short beeps=S, three long beeps=O, so it says SOS “Save Our Souls”.
@@deadduck8307 Yeah, "Shop our Store".
Its very interesting and knowledgeable what you do... but it is a humble request to post videos much often... great work ✅ 👍✌️
You are an excellent engineer I am learning from you i can order maintenance of the Mac Pro screen
Your videos are very informative and entertaining. Thanks for sharing all your knowledge
This whole time I thought you were on the other side of the country and this video made me realize your shop is an hour and half away from where I life 🤣 well, if I ever need your services, guess I will drive to your shop 👍
Always a danger that the customer will blame you for damaging the screen ("It was fine when I last used it") - expensive to replace, I've no doubt
He mentioned tape on the screen when it was brought in, I’m sure he will have that on store surveillance footage as well as the video he edited out to make this short and concise. Some dumb customers will still try to claim it’s the repair shops fault but I doubt they will get very far with a claim on this one.
it's wank dealing with people like that, had a few of them myself.
big boss is the boss. good job brother
السلام عليكم. من فضلك من أين تأتي بملفات الرقاقة, و هل يمكنك اعطائي رابط الموقع الدي تأخد منه
Nice work as every time 👍
Great job ...We missed your videos man nice to see you again
There are tools which you can connect to the chip while its soldered and you can read/write it directly without removing the chip.
you mean the crocodile headed chip reader?
He probably paid more in petrol getting down, then what the iMac is worth lol
I have a mid 2010 imac 27 in added ssd and 2 mem sticks and it beeps continuously on start up
Why are you using adapters that require soldering? I got a clamp for icsp and a drop in adapter for loose chips
Very well done as always. I must laughing when i saw the scene with your beard....you have a tool for everything, for your beard too😂👍 maybe you should sell it on your website too 😂 sorry, was just a joke to a very funny scene. I love your videos.
Every man wearing a beard needs to have a beard comb and beard oil or beard wax, it is the proper way to keep the beard look healthy and also smell nice and keep clean.
Awesome man. You are Pro 💯
Nice work as always
Always great job Sir
I get 2nd led light green( power supply comunicantes with motherboard ) but not HEAR characteristic starting MAC sound…what can be the problem.? Thank you, great vídeos!¡!,!
Late 2012… supports Metal.
Can easily be patched to Monterey no problem!
hi @northridgefix
I have a question and im wondering if you can answer it
I have a 2013 27" iMac that was working perfectly
I replaced the hard drive and now im getting the fans on full.
its a genuine 2013 iMac hard drive in there as I removed it from my old machine.
I have noticed that the iMac turns itself on.
but don't turn off when I hold the power button.
and if I let it boot and run Macs fan control there is no SMC being detected.
I did notice the 7pin flex cable that connects the PSU to the logic board is very lose could this be why ?
many thanks
Jason
Thank you for shireng video take care always gd bless you alway done to you
Awesome like always
Sir You are awesome 👍🤗
When I plug my iMac in, the fan starts running at maximum speed. (While I haven't started it yet) After starting the fan turns to normal but if I turn off the system, the fan runs at maximum speed again. What problem is this caused by
Hi, I have the same problem. I replaced the motherboard but the problem remained. Why?
I have one imac a1419 showing only two green lights please will you give me any solution
Good job.
Great job and video
was there any issue with the customer when they came to pick it up over the broken lcd?
Great video interesting Thanks
It's funny how you have to explain stuff (like the focus) that doesn't need explaining but if you don't you know you will get a bazillion questions.
Thank you very much. You help me, save me!!!!!
Nice job.
LOL “My beard gets messed up” Ma’Shaa’Allah
thank you M.r
Awesome
Danke👍👍👍
I have a similar problem. A client had opened the imac because it didn't turn on, When doing this he damaged the flexcable in the upper right corner, so while it's not white like this one, it has some green vertical lines on the display (i tested the display using a different imac). He also took the hard drive out ("to get his files") and while doing that he broke of the corner of the logic board where the speaker is attached, making it hard to listen if there are any error beeps.
i have same imac, all diagnostic leds are off though when i connect the power cord, it budges.any idea whats going on.great work northridge stay blessed.
Did the costumer try at all to shift blame about the display fault onto you afterwards? I've had all sorts of blame shifted onto me after discovering multiple issues at times, its just very hard to come up with a technique that can resolve these situations without feeling like 'here we go again ' in a pleasant as possible battle with costumer as each are of different nature as a person.
I had a Imac 27 inch 2012 after i put a usb hub in de imac with ios firmware on it the fan is spinning hard after i shut down the imac! The fan is spinning until i get the cable out. When i put the cable back the fan is spinning again when i turn it on the fan is spinning normal when i shut it off the fan is spinning hard again?
I think it is a bios firmware issue !
Can sone one help me ? Please
3 short beeps, 3 long beeps, 3 short beeps.
That’s SOS in Morse code
If i have no new EFI chip program i have only old corrupt program in the chip i save , then how can we get new program for EFI chip
Nice job !
As you know, Diag leds are just for basic test, nothing sophisticated ! If leds are green, specially for GPU and Screen, It doesn't mean that all is ok , but if led is black, yes there is a problem.
Name of the programmer your use
TL866 II plus
Sir Northridge fix can I ask you about your microscope camera is it stand or bracket
maşaallah nice work .
Customer messed up his own computer but chip repaired. 😂
nice sir
Which soldring station are you use ??
Bu işte çok iyisin
Thank you for tutorial for ilectric conniction @mj pinay
why the bios firmware is fail ?
9 beeps... three short, three long, three short... well that's an SOS if i ever herd one lol
You are the best repear !!!
Can you make a video just on the chip reprogram process pls?
Three short, three long, and three short is Morse Code for SOS, the universal maritime distress call (save our ship).
Awesome :D
I got black screen and beeping. Can ypu help
Salam Brother nice professional job like always, can you please tell me where did you get the EFI Files. Thanks 🙏🏻
Just google them and normally you’ll find a download
Pull them from a known good EFI chip? That’s how I’ve always done it. I take firmware from any device I can and save it for later use.
@@ShadowEli94 splendid idea, thanks for the tip 👌
computer in distress SOS SAVE OUR SYSTEN
so these are the "9 beeps of death" :-D
I feel you, everytime I take the mask off my beauty messes up :D
1:06 I cant believe you just casually have a comb ready like that.
you should find some method to cancel put the noise of fume extractor
in need progrem to show password firmware
The firmware can usually be reset via a disk so surprised he reprogrammed but hey each to their own
What would be more useful for the viewers (and maybe Northridge Fix) would be to provide the name of such disk and possibly hint at locations for where people may obtain it, although name should be enough. I don’t work on Apple products (no market in my location) so I’m not missing out, but others may benefit 😎
👍👍👍👍👍👍
A comb in repairing store😂
You totally humiliated apple by using windows software to solve a hardware issue with one of their chips, thumbs up!
🤘🤘
That’s SOS?
genius
🤣🤣🤣🤣 your funny. My beard. 🤣🤣🤣
What you can do is speak to the customer, maybe they'll pay for a second repair given the first was successful.
Internationally accepted S O S signal, ti ti ti da da da ti ti ti, morse code no matter how you tap it cant do it wrong or no matter how you write it it reads same no matter how you flip the writing left to right, upside down, mirrored, it always same.
Save my souls ! arr souls
Man, I dislike these so much, first that power supply with the high voltage, than these stupid glued screens and after all the trouble of desoldering the EFI chip the customer will most like say that you damaged the screen. I have one sitting here under my desk, customer tried to remove screen but the glass broke, the screen still works but there is a tiny crack running top to bottom in the glass, not the LCD part. If I could remove the glass please? Well... no I cannot, the risk is too high. I will need to order a new screen. Here in Canada it is 600 dollars and then I still have to put it on. Customer wanted to update the HDD with an SSD.... Well, look at the cost now, same as a resale used.
Yeah, SSD and thermal care seem like logical steps, just not executed by himself, since he clearly doesn't know what he's doing. Oh, well, his money to throw away - his choice xD
muahahahha everytime i put mask on my beard gets messed up hehehe youre much preetier when its messed up
ghey
He wants to be handsome before female audiance thats why he kept his comb in a repair store
😄
The morse code on this iMac is: . . . _ _ _ . . .
I have an iMac I want to get it to repair from you but courier charges are so high that I should not spend that much for sending the motherboard there. from Surat, India to CA, USA
They charge around 20000 for just sending there and plus getting back to India would be the extra same amount.
The replacement of the logicboard is costing me 56000 here. the total cost of mac before 4 years was 1.45,000 rupees. Apple has just spoiled everything with their service policies and spare parts prices.
I want to be your student on your shop🥺🙏🙏
Plzz reply🥺
R u vacanited
it is better to comb the beard with an amd processor. sorry for the bad english.
9 peeps just means it's the 9th generation.🤣 Apple products are such trash.