Hola te puedo hacer una consulta en la dirección hubo q hacer algun ajuste y en la palanca de cambios y tracción se modifica algo? Tengo la misma año 2013 y la quiero levantar
@@danielharper7511 I've made the 2" body lift also. When lifting the body, there's 2 VERY important things to keep in mind at the time of actually lifting the cab body up. Crucial steps to not damage anything. 1) Make sure you've loosened the rod that the steering wheel is connected to. It's easily done in a minute under the hood on the drivers side. If you don't, the steering wheel can't be lifted together with the truck cab. It just has to be loosened. Remeber to tighten it afterwards! Don't get yourself hurt or killed because the steering wheel stops working! 2) Remove the small plastic underside cover for the radiator fan in front of the engine. The engine fan will touch it if you don't remove it. It's easily removed from under the car at the front. Any damage to a fan blade will create lots of noticable vibrations when the engine is on. It should be removed before lifting. You can't put it back after because it will be too close to the fan. - Your front bumber and rear bumper might not be lifted together with the cab. Unsure of this. They didn't on my Nissan Navara D22 atleast. Not sure about the frontier. The handling of the car will not change drastically with only being 2" higher. However, those 2" will make you sit higher on the road, give you some extra room for larger tires, make you get less headlight glare in your eyes during night from other cars, and it feels slightly easier to see what's going on around the car. It's also a little easier to work on stuff under the car after. If you have sidesteps, those will get a 2"lift also. Hope any of this helps. The lift is worth it.
Monstertruck thanks man was wondering if it is easy to tell if it has a body lift, like if it you can see a gap between the frame and the body where you lifted it anywhere?
Truck looks great ! Did you have to modify anything in the engine compartment or any where else? Or is it just a straight install with those bushings you installed ??
Hola... tengo la misma camioneta. Tengo posibilidades de replicar esos levantes de goma, pero hacelos de acero. Mi pregunta es si los hago de 4 pulgadas (10 centímetros) bajo tu experiencia se podría? Tendría que modificar otras cosas? Me recomiendas menos centímetros? Y a que te referías con ajustar el travesaño de trasmisión.
Hola... tengo la misma camioneta. Tengo posibilidades de replicar esos levantes de goma, pero hacelos de acero. Mi pregunta es si los hago de 4 pulgadas (10 centímetros) bajo tu experiencia se podría? Tendría que modificar otras cosas? Me recomiendas menos centímetros? Y a que te referías con ajustar el travesaño de trasmisión.
Thanks for sharing, about to order the kit, the info really helped, specially the trans crossmember
can you send a link to the kit you used please
@zackdenis1637 I got it at Amazon
Thanks for the vídeo. I 'll do this on my Nissan Frontier. Congratulations from Brazil.
Hola te puedo hacer una consulta en la dirección hubo q hacer algun ajuste y en la palanca de cambios y tracción se modifica algo? Tengo la misma año 2013 y la quiero levantar
Looking great.. from Brazil
Thanks for watching
Se tiene problema con el sinfin de la direccion y defenza trasera?
Nice were did you buy the kit from and did you have to get an alignment after how does it feel any different on the freeway
From Amazon and no it doesn't need alinament because you lift the body only not the suspension
@@Noah03138 do you have a link and will it work on a 2002 king cab
@@danielharper7511 2001 to 2004
@@danielharper7511 I've made the 2" body lift also. When lifting the body, there's 2 VERY important things to keep in mind at the time of actually lifting the cab body up. Crucial steps to not damage anything.
1) Make sure you've loosened the rod that the steering wheel is connected to. It's easily done in a minute under the hood on the drivers side. If you don't, the steering wheel can't be lifted together with the truck cab. It just has to be loosened. Remeber to tighten it afterwards! Don't get yourself hurt or killed because the steering wheel stops working!
2) Remove the small plastic underside cover for the radiator fan in front of the engine. The engine fan will touch it if you don't remove it. It's easily removed from under the car at the front. Any damage to a fan blade will create lots of noticable vibrations when the engine is on. It should be removed before lifting. You can't put it back after because it will be too close to the fan.
-
Your front bumber and rear bumper might not be lifted together with the cab. Unsure of this. They didn't on my Nissan Navara D22 atleast. Not sure about the frontier.
The handling of the car will not change drastically with only being 2" higher.
However, those 2" will make you sit higher on the road, give you some extra room for larger tires, make you get less headlight glare in your eyes during night from other cars, and it feels slightly easier to see what's going on around the car. It's also a little easier to work on stuff under the car after. If you have sidesteps, those will get a 2"lift also. Hope any of this helps. The lift is worth it.
Monstertruck thanks man was wondering if it is easy to tell if it has a body lift, like if it you can see a gap between the frame and the body where you lifted it anywhere?
Truck looks great ! Did you have to modify anything in the engine compartment or any where else? Or is it just a straight install with those bushings you installed ??
I remove the fan cover and you have to adjust the transmission crossmember
Noah entertainment what did you have to do to cross member
Hola... tengo la misma camioneta. Tengo posibilidades de replicar esos levantes de goma, pero hacelos de acero.
Mi pregunta es si los hago de 4 pulgadas (10 centímetros) bajo tu experiencia se podría? Tendría que modificar otras cosas? Me recomiendas menos centímetros?
Y a que te referías con ajustar el travesaño de trasmisión.
Hola... tengo la misma camioneta. Tengo posibilidades de replicar esos levantes de goma, pero hacelos de acero.
Mi pregunta es si los hago de 4 pulgadas (10 centímetros) bajo tu experiencia se podría? Tendría que modificar otras cosas? Me recomiendas menos centímetros?
Y a que te referías con ajustar el travesaño de trasmisión.
Where did u buy that kit
Gracias por compartir esta información.
De nada brother
The truck looked nice and lifted before the kit , what suspension did u have on before ?
Anyone Know where to buy this kit ?
I have an 02 frontier I’m trying to lift
Tuviste que modificar alguna cañeria de combustible o algo de la dirección ?
No nada
Hola Noah,un saludo desde Miami, me podría hechar una mano dónde comprarlos expeiser gracias por tu ayuda
Hola en Amazon
Tu camioneta trae amortiguadores delanteros??????
Trae pero no se puede levantar de los amortiguadores
@@marceloruiz2976 pero esos amortiguadores que trae tu camioneta no era necesario modificarlos o si?
How did you do with the steering wheel
Esta complicado para remover la caja trasera
@@candehernandez8726 solo 4 tornillos
Con 2"modifico alguna manguera o parachoques?
El para choques the adelante tiene unas varillitas que lo sostiene esas eske kedan cortas un poco to fabrike unas mas largas es facil
What year model, please?
como hiso con los tornillo del medio que eran mas pegueños y necesitaba unos mas largos
El kit viene con ellos pero yo perdi dos y fui a comprarlos ala ferreteria
Los tacos se ponen sobre la base de goma no se saca completa y solo se pone el taco
What's the part number please
Disculpe dónde lo compro o como de llama para buscar en tienda libres , gracias
Es body lift kit en Ebay oh Amazon
Noah, is it a 65mm front the front and What size for the arear?
?
Dónde consigo el kit 2" para Nissan Frontier 2000
En Amazon
У нас за это наказание в виде аннулирования регистрации автомобиля
Cuales son las medidas de las gomas ? Diametro y altura??..
275/ 75/ 17
thats a lot of hard work how much a shop would charge I rater pay hahaha
To be honest I don't know but I think around $300 and up
i have the same truck what do i need to lift it
Depends you can use body lift kit or use the bolts on the bottom
Donde los puedo conseguir
Ebay oh Amazon
TOO MUCH SHAKY CAMERA MOVEMENT ...
Ur a dusche
2" our 3" ?
2"
@@Noah03138 The lift kit is 2 inches? looks higher
2 inch
@@Noah03138 thanks