@DKsaNn7 yup, just glue the shock cord in. The engine mount holds the engine steady but it also holds it in place; without it the engine might take off and blast right through the rocket, leaving it behind! Have fun with it. Just build it according to the plans. That's part of the fun!
I am going to have some real fun with this thing. Special Project is crazy, Everybody I have shown it to is raving about it. Stay tuned! I think you will like it.
LOL, You guessed it. Its coming out crazy! And almost done. Maybe I do a test firing today or tomorrow, I will make a vid. It's called the "Dragonslayer".
Just a thing about chrome spraypaint... It's a good idea to spray over your finish with a protective clear coat in order to prevent the surface from tarnishing as soon as you touch it. Aerosol lacquer is my choice because of its rigidity and indifference to the touch.
Thanks for this video! I had to make this rocket for physics class and I had never built a rocket before and I just wanted to see someone else do it to make sure I did an okay job. And I did :)
dude, thnx alot! im in boyscouts and i lost the instructions and tomoro i had to hav it done and i havnt started. ur like ma hero!!!!!!!!these r rely great instructions. :)
you should try the Quark! its really small, use's 1/2A3-4T engines, its about 5 in tall and u can do crazy stuff with it. about 2$ lol turned mine into a jet. you can also use A3-4T and A10-3T engines
' that is sad,,, estes model rockets company was in america made it,,, then now estes throw to china,,, china make estes model rockets for america,,, why do that
![YoungBoy Never Broke Again - Sneaking [Official Video]](http://i.ytimg.com/vi/1ILUps2zDFU/mqdefault.jpg)
Nice, I have seen those, they can really build up a lot of pressure and shoot pretty good.
Nice! It's a fun little rocket. I just finished building two more. One of them has the helicopter nose cone.
@DKsaNn7 yup, just glue the shock cord in. The engine mount holds the engine steady but it also holds it in place; without it the engine might take off and blast right through the rocket, leaving it behind! Have fun with it. Just build it according to the plans. That's part of the fun!
I am going to have some real fun with this thing. Special Project is crazy, Everybody I have shown it to is raving about it. Stay tuned! I think you will like it.
hey i just got interested in model rocketry and your website has been a real help
@MrJumpersun yes, thats right. It has a small charge in the opposite direction, pops the parachute.
I am not sure the name of it. it's the one that comes to a sharp triangle point. Most any blade would work well. Have fun with your model rockets!
LOL, You guessed it. Its coming out crazy! And almost done. Maybe I do a test firing today or tomorrow, I will make a vid. It's called the "Dragonslayer".
Just a thing about chrome spraypaint... It's a good idea to spray over your finish with a protective clear coat in order to prevent the surface from tarnishing as soon as you touch it. Aerosol lacquer is my choice because of its rigidity and indifference to the touch.
@DKsaNn7 The engine has a charge on it that will pop and force the parachute out.
Thanks for this video! I had to make this rocket for physics class and I had never built a rocket before and I just wanted to see someone else do it to make sure I did an okay job. And I did :)
I really enjoy rockets, you are going to have some fun. CHeck out that hobby shop!
@remystipsen1 Is that a glue for plastic models? If so then no. Use any kind of white glue, elmers etc. That will be good.
dude, thnx alot! im in boyscouts and i lost the instructions and tomoro i had to hav it done and i havnt started. ur like ma hero!!!!!!!!these r rely great instructions. :)
Cool! Have fun with your new hobby!
Thanks for the 5 and cool! Its a fun hobby.
Thanks, You have gotta see what I do with this rocket! I am half done with the new project.
@bhblwrestler I checked out your vid. Nice job on the rocket and the video! Have fun launching it and be sure to take a launch video!
Good work! Must have got those fins nice and straight!
thanks, I will give the Quark a try.
This was a BLAST guys! Thanks
Also can u just glue the shock cord to the inside layer and is the engine mount necessary, cause it's just there to hold the engine steady?
Great project made it for my class, Engineering Projects and mine flew the highest (the same type of the video).
you should try the Quark! its really small, use's 1/2A3-4T engines, its about 5 in tall and u can do crazy stuff with it. about 2$ lol turned mine into a jet. you can also use A3-4T and A10-3T engines
I might find one at a hobby shot, nice vid 5 stars!
It sure does, funny name for a tiny rocket.
@alieldeeb yes
i forgot but HOW DO U GET THE STREAMER TO POP OUT!
I'm trying to make a parachute come out
Cool!
just a quick question, can i use contact cement for the nose cone?
Ali Eldeeb don’t do that as the parachute comes out of the top
@DKsaNn7 When the engine stops burning it automaticly pops out the parachute
@s043487263 Cool, you should give it another try. Making a rocket out of scratch isn't too hard. would be fun.
How do he get it
@epicfantasy thanks
Very good vid! 5*
Oh yes! But I am not going to fly it in the usual way :)
@unable1234 try putting a c6-5 engine
This is the old Twister! (Except the fins are pre-cut)
cool
only problem i had was i got burnt by sparks on ma hands, but that was with bottle rockets
aww you should have added a parachute instead of streamer
yo this guy has got some gangsta voice lol
why have you stoped talking in the end?
your makign a RPG! lol i made those with bottle rockets and straws
cool rocket i just made a video on one and i need some views
i was thinking about putting that on my rc jet and then fire it in the air as a missile, lol i know i am crazy
and were
"Tacky"
i use super glue, not plastic cement lol.
オイラも挑戦したよ🐱
press 8 it looks wrong thumbs up if u agree
if i had a nickle for every pixle i would have about 4 cents
Cade Kraske that doesn’t make dent you wouldn’t have 4 and you said every pixel is a nickel which is 5 cent
'
that is sad,,,
estes model rockets company was in america made it,,,
then now estes throw to china,,,
china make estes model rockets for america,,,
why do that
Nevermind. -_-