Thx mate , glad to hear . I am hoping to be able and make some more videos together with him 👍🏻 kids at this age can like it now but next week not anymore 😉
Hey man leuke video. Altijd leuk om vader / zoon dingen te doen. Heerlijk om zo'n grote tuin te hebben om in te kunnen schieten (voordeel Belgie tov Nederland denk ik). Ik zal de stream van je zoom zeker eens gaan checken. #1
Adorei o vídeo pra mim ficou ótimo e também os agrupamento foram muito bons saíram um pouco devido ao vento, da pra ver no vídeo que está ventando bastante, parabéns vocês dois atiram muito bem, e essa PCP FX Crow GRS é muito linda e precisa também um grande abraço 🇧🇷
That's some good shooting your boy might think about shooting in matches after his time on the racetrack I also used to run my 66 Plymouth satellite 426 hemi 4 speed down the racetrack when I was younger looks like your boy has the ability to do good in both great video as always my boy is about your age now but he shot a little with me when he was young but he did not like to deer hunt getting up early sitting in the cold wasn't for him thank you for the shooting match good luck to your boys racing career
Thx mate , love to go shooting with him ! But they grow fast , have a girlfriend etc . So I cherish every moment we spend together because before we know he will be 18🥹 This month he is starting his jong driver academy so he can compete in official karting races 👍
Look like around 7mins you appear to have added a barrel/ bottle band. Did it come with the rifle ? Following your video, I have ordered a FX crown GRS.... Left hand. Looking forward to trying it out 👍
Hello very nice shooting, your son will be a Pro pretty soon, congrats,so what kind of device it’s holding the barrel and the air tank? And where did you get it. Thank you very much, be safe.
Hi , thx for the support 👍🏻 That device is a self made 3D printed support to hold the point of impact when I mount different moderators or chronograph. Would you like the file ?
@@Airbuks yes please thank you very much, I’ve been following your channel for the last couple years, I really like the way you explain the process, you are very detailed oriented, please send me the file when you get a chance, thanks
The regulator is at 145 bar , the internal hammerspring is just about maxed out ( check the video I made about that ) Then for pellets I put it on 21 , pellet transferport on the barrel and pellet probe For slugs I used a pinprobe , put it on the dual transferport and at 23
@@justinhromek73 I did a slight tweak on the trigger but not much different from the factory. In the beginning it was very good but after a few weeks I got a sticky trigger . Adjustment of 1/4 turn on the 2nd stage fixed it again
Dear Airbuks, In your video I see that you have a black plastic block between the bottle and the barrel. something like a barrel band on your FX Crown. my question is where is this available and for sale.? please let me know. Sincerely. Lari.
Hi , this is just a idea I was playing with as the moderator putted some weight on the barrel and since this is a 700mm I wanted to support it a little but not clamp it down . It was a simple DIY 3D print
I made it myself, it doesn’t make any difference in accuracy with or without, but it helps a lot to eliminate barrel droop when using heavy moderators or chronograph
Your lad shoots much better keeping his cheek weld between shot strings....shoots well and looks way cooler than you😎😎 Nothing better than spending quality time with your offspring and seeing them do so well.
Yes I am 👍🏻 He is listening very well to the theory I explain about shooting and applies it , me on the other hand know exactly what to do but might not apply it always 🤣
It’s really heartwarming to see you let your boy play with your toys!
As a parent I am blessed he wants to get out there with me and have a lot of fun 👍
@@Airbuks yeah it's good,
kids don't spend enough time outside these days!
very nice looking boy. it was nice to see him representing the Airgun world when he was racing! good luck.
Thx 🙏🏻
great shooting in that wind nice to see father and son having a good time together
Thx mate
AWESOME!!!!
goed geschoten Kyle 👍
Your son is Awesome!
I wish him well in his racing endeavors.
Thx , I will tell him 👌
Nice video, your son is a very good shot. 👍
Thx
I have Gen I Crown and love it.
Impressed how precisely those targets are stuck on!
🤣👍
Awesome shooting guys wat to go young man great job thanks for sharing bsafe guys 👍
Great as always. I'm still waiting for the full video review of the LSC -SK19.
Another interesting and very genuine video. Don't tell me that's your backyard as a Californian I would be so envious!
Thx for the support, it’s the garden of my parents. I count myself lucky to have my private range there 😉
i hope to do that with my boy too! good job bro !!!
I hope so to mate , it’s wonderful to share these moments
@@Airbuks yeah!!!
you should do more just like this with your son perfect
Thx mate , glad to hear . I am hoping to be able and make some more videos together with him 👍🏻 kids at this age can like it now but next week not anymore 😉
My GRS .25 is the same with the hybrids out of the 380mm barrel at 880fps!!!
Great short pesting rig... 👍
Sweet 💪
Hey man leuke video. Altijd leuk om vader / zoon dingen te doen. Heerlijk om zo'n grote tuin te hebben om in te kunnen schieten (voordeel Belgie tov Nederland denk ik). Ik zal de stream van je zoom zeker eens gaan checken. #1
Thx man , ik denk niet dat het België tov Nederland is 😉 ik ben gewoon een gelukzak bij mijn ouder zo een tuin te hebben .
Parabéns ao garoto, que ele participe de mais vídeos e possa influenciar mais jovens nesse maravilhoso esporte.
Nice shooting boys! 😃
Thx
Adorei o vídeo pra mim ficou ótimo e também os agrupamento foram muito bons saíram um pouco devido ao vento, da pra ver no vídeo que está ventando bastante, parabéns vocês dois atiram muito bem, e essa PCP FX Crow GRS é muito linda e precisa também um grande abraço 🇧🇷
English ?
That's some good shooting your boy might think about shooting in matches after his time on the racetrack I also used to run my 66 Plymouth satellite 426 hemi 4 speed down the racetrack when I was younger looks like your boy has the ability to do good in both great video as always my boy is about your age now but he shot a little with me when he was young but he did not like to deer hunt getting up early sitting in the cold wasn't for him thank you for the shooting match good luck to your boys racing career
Thx mate , love to go shooting with him ! But they grow fast , have a girlfriend etc . So I cherish every moment we spend together because before we know he will be 18🥹
This month he is starting his jong driver academy so he can compete in official karting races 👍
Family+shooting🖤💯💣
The best times 🤩
is that you garden,it's lovely 😍 👌
That the garden of my parents 😉 but I count myself luck have my private range there 🤗
That is Pique and his son lol. Nice shooting man
Thx
Great video mate nice shooting with your lad .. Any plans to do the install of the power block upgrade with the m3 .25 ?
I am planning on doing that install video , but for a 22cal . Still trying to get the parts😉
@@Airbuks great look forward to the video mate ..
Good shooting in difficult conditions both , which 700mm .22 barrel were you using ?
Thx , it’s a original 700mm superior barrel
Thanks 🙂
Look like around 7mins you appear to have added a barrel/ bottle band. Did it come with the rifle ?
Following your video, I have ordered a FX crown GRS.... Left hand. Looking forward to trying it out 👍
No the barrel support I have made myself to counter some barrel droop using heavy moderators. No difference in accuracy with or without
Muy buenos disparos y muy buenas pruebas felicitaciones y a seguir disfrutando de lo que nos gusta saludos desde ARGENTINA 💪💪👏👏👍👍
Thx for the support 🙏🏻
Has this product been entered in Indonesia?.🙏🙏
A really want to have it this unit is so cool and elegant👍
This I don’t know 🤔
What is this piece between the cylinder and the over-pipe used for, and what is its name and if possible could you give me its measurements?
It’s a simple 3D printed barrel support to counter the barrel droop when using a moderator
Lest go kyle
👍🏻😉
Hello very nice shooting, your son will be a Pro pretty soon, congrats,so what kind of device it’s holding the barrel and the air tank? And where did you get it. Thank you very much, be safe.
Hi , thx for the support 👍🏻
That device is a self made 3D printed support to hold the point of impact when I mount different moderators or chronograph. Would you like the file ?
@@Airbuks yes please thank you very much, I’ve been following your channel for the last couple years, I really like the way you explain the process, you are very detailed oriented, please send me the file when you get a chance, thanks
@@AlexSanchez-le7bh send me a mail to 😉
Airbuks@icloud.com
Could you please tell what's the reg pressure, hammer spring number and transfer port with 380mm barrel.
The regulator is at 145 bar , the internal hammerspring is just about maxed out ( check the video I made about that )
Then for pellets I put it on 21 , pellet transferport on the barrel and pellet probe
For slugs I used a pinprobe , put it on the dual transferport and at 23
Thank you so much@@Airbuks you are the best👍👍👍👍👍
@@SuperKillerJeans your welcome
If i have some questions in the future , can i ask you in dutch? My english is not that good.
Ja natuurlijk geen enkel probleem 👍
Fun day regardless of the wind! Great vid and good looking/accurate gun. Do you like the trigger on the crown better than the impact?
To be honest the trigger on the impact is better specially the M3 , but the comfort of the GRS stock make all the difference 🤩
@@Airbuks did you adjust your m3 from factory? I’m afraid to start messing with the trigger on my m3, I don’t have your skills…
@@justinhromek73 I did a slight tweak on the trigger but not much different from the factory. In the beginning it was very good but after a few weeks I got a sticky trigger . Adjustment of 1/4 turn on the 2nd stage fixed it again
Dear Airbuks,
In your video I see that you have a black plastic block between the bottle and the barrel.
something like a barrel band on your FX Crown.
my question is where is this available and for sale.?
please let me know.
Sincerely.
Lari.
Hi , this is just a idea I was playing with as the moderator putted some weight on the barrel and since this is a 700mm I wanted to support it a little but not clamp it down . It was a simple DIY 3D print
Good video. Where did you get the barrel support and how do you like it?
I made it myself, it doesn’t make any difference in accuracy with or without, but it helps a lot to eliminate barrel droop when using heavy moderators or chronograph
Hi
I am living in Spain anh I want to buy some accessories for FX impact M3. Could you tell how to I get them?
I always get my gear from Krale Schietsport in the Netherlands
what program do you use for video editing?
I use Davinci resolve 18
Hi man... Did you put one suport under de barrel ?
Yes it’s a small diy support. It helps when using a moderator
In Front rest you have sand or?
Grounded corn 🌽 cob 👍🏻
Your magazine, what's that?
I am using the original FX magazine
The wind is never your friend when shooting .
Although I’m impressed with y’all’s groups under these conditions .
Thx mate 👍🏻 the only good thing about the wind is the challenge but it’s very frustrating to zero the gun 🤣
Mantap bos smoga aja bisa punya snpan gtu aminnn
Nice
Thx
Lamaa banget bos aplod vidionya di tunggu nih vidio2 terbarunyaa
Good in that wind give your boy some 30g slugs and take him to RMAC you never know he might just win some big bucks take care keep shooting
😂 thx for the comment mate , I will tell him . If everything is well I will try to attend to RMAC next year . Gives him some extra time to practice 😉
@@Airbuks yeh just make sure you let him try them H&N 30g 218 at 985fps sub Moa all day long Fx 700 barrels love them
Mantap bang👍👍👍
👋👋👋👍👍👍
👋👍
Your lad shoots much better keeping his cheek weld between shot strings....shoots well and looks way cooler than you😎😎
Nothing better than spending quality time with your offspring and seeing them do so well.
A proud father
Yes I am 👍🏻
He is listening very well to the theory I explain about shooting and applies it , me on the other hand know exactly what to do but might not apply it always 🤣
Привет с Украины, пушка огонь, а в качестве гуманитарной помощи один аппарат подарить для инвалида подпищика
It was n’t a good day for shooting 😣
No indeed , but sometimes you got to deal with what you have 😉