Extremely helpful. This is my first time sealing grout; I didn't even know whether or not I could/should pour the sealant into a container...whether it would dry out or what. This video was short, straight-forward and honest. Thank you. Now I'll go do it. My project is actually wide grout seams between glass-block walls in my shower. : )
Thanks so much - my husband just told me to seal the grout in the shower but didn’t say more than that expects it done when he gets back so I was kind of feeling frustrated and unsure about this. That sounds easy & thanks for showing the product you used.
Sealer helps keep grout from staining. Without sealer the original color of grout with discolor and stain with soap shampoo residue. It's a hassle to seal wall cement grout but it's got to be done!!
Thanks Tyler, VERY helpful . Great little video and loved the little " demo" with the sponge. Glad I ran across this while searching for help. I KNEW there MUSt be another step.
Can you give us more tutorials for small projects that you do? Its so much better you actually show us while you do it! Thank you so much!! Im glad you showed up on my suggested videos to watch!
yes. definitely seal your shower! that way, when the sealant wears away over time, moisture can be retained and cause mold and stagnation. splendid idea. 22 yrs in tile.
@@Lambossin right???? He criticizes the dudes method but fails to provide a solution?🙄😒 👍 outstanding! Great job dude 👏🤣at least the sealer gives some kind of protection!? If there is no sealant moisture can be retained and cause mold and stagnation sooner than later...so whats his point? Where is he going with the comment?🧐🤔very confusing 🤣
U criticize the dudes method but fail to provide a solution?🙄😒 👍 outstanding! Great job dude 👏🤣at least the sealer gives some kind of protection!? If there is no sealant moisture can be retained and cause mold and stagnation sooner than later...so what's ur point? Where r u going with the comment?🧐🤔very confusing 🤣
My understanding is that this sealer does not make the grout or tiles waterproof, but simply protects them from stains/discolouration. You may want to double check your information.
Keep in mind that all sealers will eventually wear away or lose their effectiveness. It’s recommended applying new sealer once a year or whenever you notice that water is no longer beading up. Tip: apply it twice the first time. Apply, wait 10 minutes, then wipe off excess. Let it dry for 30 minutes and repeat.
@@JustLifeLLC Ah ha...."selling point for homeowners"...didn't think about that. I agree using a brush in most applications is best. 35 yr union journeyman, 12 yr private business owner, plumber here.... Thx for the reply
You can! Wait 10 minutes and wipe the tiles. His way is better for floor tiles and a way to not waste product, and a way to make sure all grout surfaces get evenly coated.
it depends on which tile grout, if its cement based grout then yes its not waterproof,which most bathroom has, but if it's epoxy based grout then it's sealed and waterproof
Do you spray it on then use the sponge? To me this is gonna drip. There are no instructions with my product it's ridiculous. But similar what you have in your video. If i spray it will get on the tile not just the grout is that bad??
“Thanks to our really awesome friends….if you couldn’t make it out it’s perfectly fine” Sounds like the friends ranking I assume this guy updates and posts regularly had some movement
Sealer does not waterproof the grout. It helps wick away water so it doesn't sit as long. If you have leaking tiles, it will not fix this issue. Sealing helps keep the grout consistent and cleaner, and will help a bit with water absorption.
Correct. Grout needs to cure for several days, in most cases, before it can be sealed. Otherwise, by adding additional moisture in the form of sealer, the grout may not cure properly. This can leave your grout with varied coloration.
You would spray directly if the tiles were not sealed already like marble or granite, but in this case he is using subway tiles that are already protected, thus he only seals the grout.
no silicone is 100% solid silicone waterproof and very flexible but very tricky to use. acrylic caulks are water clean up and common as well. they also do not need to be sealed. grout is cement and porous by nature.
Advice needed please. I sealed a shower room floor which had been done by a tiler and I used too much sealer. I was thinking it would be a good idea to put on a flood of sealer so I poured it on thickly and spread it with a microfibre cloth. This particular sealer went on milky white, similar to thin PVA glue and it dried clear. The tiles are a marl matt grey colour and now have a slight sheen to them. I am happy with this but before being sealed, the grout lines were all nice and even with an even colour throughout. The grout lines are now all stained, have dark and light areas and are all patchy, although they are sealed. They also have a plastic look to them as well. Can anyone tell me how to fix the grout lines? Thanx
Does anybody know how long I can go after I put sealer on the grout? We just did the tile and grouting on our bathroom 2 days ago, we didn't seal it though.. Can I still seal?
Hi Renee. Shouldn't be an issue as long as you're spraying it on the gout. I would recommend doing a test spray on piece of the glass before you do the whole thing. On more porous tiles it can discolor it a bit.
Might double check your info.. sealer does not water proof the grout… it simply protects the grout from stains and etc.. u must seal it properly behind the tile.
complete rubbish... natural stone tile is porous and you need to seal that ... ceramic and porcelain tile is never going to let water through to the wall unless your grout job is bad, buy waterproof grout and adhesive. In fact porcelain tile requires chemical dried adhesive as it impervious, so it will not dry naturally... someone sold you a dummy, do not waste time buying sealer unless its for natural stone and then you should paint it on the whole tile not the grout. If your grout stains use a tooth brush and baking soda or an attachment on your wallpaper steam does a great job.
If he started with full tile then next row would be half . On other end ?? If it's balanced small cuts are ok. On side walls tile from outside full piece to corner. Should end up being a good sized cut.
Why r u looking at yourself? When shooting content, you should look into the camera, not yourself. I was also hoping for a more helpful explanation. You never used the product!
Extremely helpful. This is my first time sealing grout; I didn't even know whether or not I could/should pour the sealant into a container...whether it would dry out or what. This video was short, straight-forward and honest. Thank you. Now I'll go do it. My project is actually wide grout seams between glass-block walls in my shower. : )
Thanks! You got this Launne! :)
Thanks so much - my husband just told me to seal the grout in the shower but didn’t say more than that expects it done when he gets back so I was kind of feeling frustrated and unsure about this. That sounds easy & thanks for showing the product you used.
Sealer helps keep grout from staining. Without sealer the original color of grout with discolor and stain with soap shampoo residue. It's a hassle to seal wall cement grout but it's got to be done!!
Thanks Tyler, VERY helpful . Great little video and loved the little " demo" with the sponge. Glad I ran across this while searching for help. I KNEW there MUSt be another step.
Can you give us more tutorials for small projects that you do? Its so much better you actually show us while you do it! Thank you so much!! Im glad you showed up on my suggested videos to watch!
yes. definitely seal your shower! that way, when the sealant wears away over time, moisture can be retained and cause mold and stagnation. splendid idea. 22 yrs in tile.
So what do you recommend instead?
@@Lambossin 'regular cleaning'
@@Lambossin right???? He criticizes the dudes method but fails to provide a solution?🙄😒 👍 outstanding! Great job dude 👏🤣at least the sealer gives some kind of protection!? If there is no sealant moisture can be retained and cause mold and stagnation sooner than later...so whats his point? Where is he going with the comment?🧐🤔very confusing 🤣
U criticize the dudes method but fail to provide a solution?🙄😒 👍 outstanding! Great job dude 👏🤣at least the sealer gives some kind of protection!? If there is no sealant moisture can be retained and cause mold and stagnation sooner than later...so what's ur point? Where r u going with the comment?🧐🤔very confusing 🤣
I have sealed a shower once dried I srayed two coats of liquid car wax twice not the cheap one . That shower has remained spotless .
Thanks for the input. Short and to the point
Thanks. I wish I would have known this 30 years ago. Wish we would have had RUclips 30 years ago.
I just spray it onto the wall excessively and then wipe with a big sponge, it's much quicker than dipping with a little foam brush.
what do you use, just a spray bottle?
@@raczyk no he puts in his mouth and spits it out
Nick Tzavaras 😂🤣🗣💦💦
@@grumpy_greek lmaOOOOOooo
@@grumpy_greek - Just saw this. Made me LOL!!! 😂😂😂😂
A Q-Tip works really well for application. I do it 3x.
Good call MarzNet256! Thanks for the tip! ;) Get it...
Go Dawgs! Thanks for the video, same stuff I'm applying today too.
Yo! Sealing some tile. Found your video old friend! Dustin scruggs here
Thanks for making the video, it was super helpful!
My understanding is that this sealer does not make the grout or tiles waterproof, but simply protects them from stains/discolouration. You may want to double check your information.
Walker hey i need help what happens if its on my hands im i in danger
Well, you're pretty much done for. It was nice knowing you. Good luck!
Walker please tell me
You're dead. Simple. You should have read the directions. Bye.
ya. it even says protects against stains at 1:01, LOL.
Thank you !!! Good job explaining how to use this product
How often do you need to re-seal the grout?
Keep in mind that all sealers will eventually wear away or lose their effectiveness. It’s recommended applying new sealer once a year or whenever you notice that water is no longer beading up. Tip: apply it twice the first time. Apply, wait 10 minutes, then wipe off excess. Let it dry for 30 minutes and repeat.
Thanks for the video!
Thank you this information was very helpful. Just had my tile, grout done 2 days ago should I wait longer before applying the sealer?
Need at least 48 hours for grout to cure fully. So after two days can proceed to apply sealer.
You’re welcome ♥️♥️♥️
Thanks bro that’s my job tomorrow
so if it comes with a spray bottle, why the brush?
same question!
Spraying can leave bubbles. It comes in a spray bottle for ease of use and selling point for homeowners. Brushing is the best.
@@JustLifeLLC Ah ha...."selling point for homeowners"...didn't think about that. I agree using a brush in most applications is best.
35 yr union journeyman, 12 yr private business owner, plumber here....
Thx for the reply
Maybe this is a dumb question, but why can’t you just spray it on since it’s in a spray bottle?
You can! Wait 10 minutes and wipe the tiles. His way is better for floor tiles and a way to not waste product, and a way to make sure all grout surfaces get evenly coated.
You can spray it like this
ruclips.net/video/Whnu6lmcPzI/видео.html
Thanks for the vid. I did the same style subway tile
it depends on which tile grout, if its cement based grout then yes its not waterproof,which most bathroom has, but if it's epoxy based grout then it's sealed and waterproof
Why would the grout appear wet after water is on it if it’s been sealed?
All these specific questions in the comment section, most of them are answered on the product instructions of the particular sealer you buy.
Do you spray it on then use the sponge? To me this is gonna drip. There are no instructions with my product it's ridiculous. But similar what you have in your video. If i spray it will get on the tile not just the grout is that bad??
“Thanks to our really awesome friends….if you couldn’t make it out it’s perfectly fine”
Sounds like the friends ranking I assume this guy updates and posts regularly had some movement
The flavour is extra delicious. I sprayed a little on my tongue.
Thank you. Helpful. Cheers.
Thanks 🙏
thanks
i would recommend waiting for 48 hours prior to using your shower again....... VISIT the TWIN HOME EXPERTS CAHNNEL
Twin Home experts
Good video. Good job!!
Very helpful. Thank you
Sealer does not waterproof the grout. It helps wick away water so it doesn't sit as long. If you have leaking tiles, it will not fix this issue. Sealing helps keep the grout consistent and cleaner, and will help a bit with water absorption.
If the water beads up then it will not penetrate, that’s why sealer is recommended yearly.
On a new build howe, which is what I'll have. Do you need to wash the grout? Was thinking of steam cleaning it if needed.
W
Please tell me the best mold proof compound to cover the gaps between wall's tiles and finishing? thanks!
there is none. you must keep the shower dry and ventilated as much as possible. silicone is best. but will mildew still.
bmfdv WF42H5200AW
Thanks for the video!
Wonder why the construction company doesn’t grout for you when you purchase a house.
Time and money. Tile guys would have to come back 3 days after the job is done.
Correct. Grout needs to cure for several days, in most cases, before it can be sealed. Otherwise, by adding additional moisture in the form of sealer, the grout may not cure properly. This can leave your grout with varied coloration.
U didn’t mention wiping it?
Wipe it like this off tiles only. ruclips.net/video/Whnu6lmcPzI/видео.html
Thank you! How long do I let grout dry before sealing, and how soon after sealing can I use shower?
72 hours from new installation. after cleaning? right away. use it in 24 hrs
About to do the same with a white subway tile shower im scared some will dry on the tile what do you wipe the tile off with ? We rag or dry rag ?
Why can't you just spray the sealer directly to the grout? Where does the sponge come in? To the the grout before the spray?
You would spray directly if the tiles were not sealed already like marble or granite, but in this case he is using subway tiles that are already protected, thus he only seals the grout.
@@muffyfromlegal thanks makes sense
thank you, Brian's Wang
In the corners you are supposed to use silicone, do you seal silicone too or no?
no silicone is 100% solid silicone waterproof and very flexible but very tricky to use. acrylic caulks are water clean up and common as well. they also do not need to be sealed. grout is cement and porous by nature.
Thanks
Do you wash the tile first? Can you use a pressure washer to wash the grout?
Nice introduction. Where's the video?
He did hold up a bottle for a few seconds. And a brush. What more do you want?
Is there any better way/tool of applying the sealer?
the word is impervious
Why would it be backwards if you’re taking a selfie?
I have seen them show up like mirror images. Not sure why.
very helpful vid thanks
Damn, that tub surround tile looks rough
hey brooo
can it work on already leaking tile (which is on a tank)
no. That means there is a problem underneath.
How long does it last?
Go Dawgs!!! Woof!
If like dissolves like then why use a water-based sealer?
Advice needed please. I sealed a shower room floor which had been done by a tiler and
I used too much sealer. I was thinking it would be a good idea to put on a
flood of sealer so I poured it on thickly and spread it with a microfibre cloth.
This particular sealer went on milky white, similar to thin PVA glue and it dried
clear. The tiles are a marl matt grey colour and now have a slight sheen to
them. I am happy with this but before being sealed, the grout lines were all
nice and even with an even colour throughout. The grout lines are now all
stained, have dark and light areas and are all patchy, although they are sealed.
They also have a plastic look to them as well. Can anyone tell me how to fix
the grout lines? Thanx
You can try www.google.com, type "cleaning dried (product you used) off tiles"
Also, most of the time fresh sealer will re-liquify old dried up sealer
Does anybody know how long I can go after I put sealer on the grout?
We just did the tile and grouting on our bathroom 2 days ago, we didn't seal it though.. Can I still seal?
Hi Maggie. Yes. Just make sure the tile is completely dry.
thanks Tyler! 😊
yeah 3 days for grout to cure usually. you can always seal and you'll have to every 6-12 months with product in video
bmfdv Thanks for the advise 😊
Do you have to seal grouting ?
Can this be used on my glass backsplash?
Hi Renee. Shouldn't be an issue as long as you're spraying it on the gout. I would recommend doing a test spray on piece of the glass before you do the whole thing. On more porous tiles it can discolor it a bit.
Go Huskies!!
Tiler?
Or Tyler?
He is a home owner not a pro, don’t be too harsh on him but also do not listen to what he is sayin lol
No it wasn’t helpful, you showed a spray bottle and then you show a paintbrush for application application. Be clear...
You can spray it like this: ruclips.net/video/Whnu6lmcPzI/видео.html
Pls make a video how to do that. Thanks
this was posted 4 years ago .. guy still sealing tile cracks 😂
Might double check your info.. sealer does not water proof the grout… it simply protects the grout from stains and etc.. u must seal it properly behind the tile.
So why not seal cement in a brick house
Because you aren't worrying about it changing color.
hay lam
But if your grout is 100% waterproof the water that gets behind a shower wall ( and it does )will not dry and will mold
Leave a few weep holes that are small near the tub.
If you seal the caulk and silicone your corners and around your fixtures you should not get any water behind.
complete rubbish... natural stone tile is porous and you need to seal that ... ceramic and porcelain tile is never going to let water through to the wall unless your grout job is bad, buy waterproof grout and adhesive. In fact porcelain tile requires chemical dried adhesive as it impervious, so it will not dry naturally... someone sold you a dummy, do not waste time buying sealer unless its for natural stone and then you should paint it on the whole tile not the grout. If your grout stains use a tooth brush and baking soda or an attachment on your wallpaper steam does a great job.
Embecmom - He's only sealing the grout...not the whole tile, dummy. And it does protect the grout...especially in a shower.
Wtf is up with those tiny tiles in the corner??? Eeeeew!
If he started with full tile then next row would be half . On other end ?? If it's balanced small cuts are ok. On side walls tile from outside full piece to corner. Should end up being a good sized cut.
you should show us actually that how to do it disappointed by this video
How does this video have over 350,00 views? Yikes!
Jesus fried Christ! Just invest in a premium brand grout, like power grout by Tec, permacolor Buy laticrete and so on.
Tell that to cheap ass builders.
This other stupid title on this video u should name how to talk about sealler on shower he never showed how to deal it. Scam titles.
Pause the video at 2:04
Too much talking and no work
Why r u looking at yourself? When shooting content, you should look into the camera, not yourself. I was also hoping for a more helpful explanation. You never used the product!
How long does it last?