The engine is designed to fail early in it's life, the wet belt, stretch belts, friction tensioner and ill advised service plan make this engine a disaster from day one. But you made a great video on how to repair some of this, keep up the good work 👍
Wicked seeing you do this. My belt broke recently and completely ruined my engine. Got to replace the engine. I wish Ford would tell people about known problems so we could service them properly.
I just recently received a letter from ford requesting me to make an appointment with them to inspect the belts condition. Has to be changed that day if it fails the inspection.
Ford are going to stop handing out free engines very quickly there will be much stricter measures on what qualifies for a replacement by ford but its still there fault they designed such a crap engine in the first place
It is actually an excellent engine as long as the timing belt is changed in time. I believe that there is now a modified belt that lasts longer while the oil change and bel change intervals have also been shortened.
Not that great, mine is getting a new engine and it’s not even two years old, followed Ford service intervals to the letter. In my view they are shite wet belt crap. Ford offered me £50! Yes £50, this is costing me in lost revenue through work, and other associated costs.
@@Metal05 They are under warranty and the new engine will not directly cost you. Or shouldn’t unless they charge for fluids. Your new engine should have the modified parts.
Read my reply. Costing me so much money in other ways! I lost three boiler installs waiting for a courtesy van, I lost money on an event as I didn’t have wheels £500, need I carry on? I’ve read only tonight someone is on their 3rd engine on another forum. They are shite.@@hedydd2
From what year was the belt covered by Ford Warranty and for how long from new? I have a 2020 290 and was wondering could get belt changed to be on safe side
This isn’t the point. I get what you’re saying though. So far being self employed I lost three major jobs because I didn’t have my van with tools in it. The hassle of losing time on other jobs phoning Ford U.K. lost time and productivity, this amounts to about £5k. It’s diabolical from a company Fords size. I will never purchase this crap again. I hoped and prayed it would be ok. I didn’t even want a Ford custom. I’d ordered a VW, but they cancelled it due to chip shortage and loom issues around covid time, 🤷🏼 go home to your partner or bank manager and say you’ve lost £5k this month! @@hedydd2
Hi I've similar van mines an 18 plate done 68,000 mile I've heard some real horror stories about belt failure on these vans so good to see How its done and the mileage u advise to get it replace. How much roughly would I be looking to be paying.
They say 150,000 or ten years whichever comes first, but no harm getting it done earlier for a peace of mind. Some of these vans are under recall by ford and if it snaps they put a new engine free of charge
Use a jack from underneath put a wooden block and jack from gearbox closest point towards the engine. Be careful as there’s a sensor close underneath near the jacking point
If you take off the oil pump as well as the sump then you’ll be able to check a part of the belt but you won’t be able to see the whole belt in order to determine if there is damage, and if so the extent of it. Hope that was helpful
@@enkamotors7012 thanks for the reply,got one to do next week for the first time , had trouble with the kit for supplied ,wrong aux belt , crank bolt ect , mine has a damper pulley and requires a tool to remove it , so had to rebook.cheers
In the Ranger it is a simple job that takes no longer than changing many dry timing belts. There is less room and therefore it is more difficult for transverse engines fitted to front wheel drive Transit.
The recall is only for the 2017 models I believe. For the 2017 model they replace the timing belt and if the timing belt has snapped, they change the engine also
@@enkamotors7012 thanks. Had a bit of a nightmare. All done. Came back from road test, oil leaking out quite bad. Removed crank pulley, bit of the seal is pealed off. Very strange not sure how. Have ordered up a new seal. Not something you may have come across? Appreciate the help 👍
@@enkamotors7012 i replaced the cover, just confirmed its a non genuine cover, came with seal fitted on. They have supplied a new seal under warranty but just very strange for a crank seal to tear off like that.
My vans been in ford for a week now got it recovered to my usual garage and they said it was cam belt but could be under a recall so I called ford and they said they’d look at it so recovered it to Ford and haven’t heard anything back yet , from what I’ve hearing though from folk with similar issue it’s 8k for new engine😢
Thanks mate when I called they said it was under a recall and they’d have a look at it but not heard anything and hard to get hold of them when calling .
Hi mate, i have timed everything up and put belt on, rotated the engine 7 times, my crank lines up, fuel pump lined up after 2 1/4 turns but my cams are facing 180 out. Facing opposite to the pin holes. Engine turns ok by hand. Is this ok?
![[PL] Watch and Work Know-how: Wymiana paska w Fordzie 2.0 l EcoBlue 77 kW](http://i.ytimg.com/vi/7dXRzNjTslw/mqdefault.jpg)
![[PL] Watch and Work Know-how: Wymiana paska w Fordzie 2.0 l EcoBlue 77 kW](/img/tr.png)
The engine is designed to fail early in it's life, the wet belt, stretch belts, friction tensioner and ill advised service plan make this engine a disaster from day one.
But you made a great video on how to repair some of this, keep up the good work 👍
Wicked seeing you do this. My belt broke recently and completely ruined my engine. Got to replace the engine. I wish Ford would tell people about known problems so we could service them properly.
Some of these vans are under recall by ford and if it snaps they put a new engine free of charge
I just recently received a letter from ford requesting me to make an appointment with them to inspect the belts condition.
Has to be changed that day if it fails the inspection.
Ford are going to stop handing out free engines very quickly there will be much stricter measures on what qualifies for a replacement by ford but its still there fault they designed such a crap engine in the first place
But that’s not the point. How much hassle is it to get a new engine in it. @@enkamotors7012
Great video mate..chuckled at how many times you said as you can see though haha!
Crazy how fords have went backwards with reliability
It is actually an excellent engine as long as the timing belt is changed in time. I believe that there is now a modified belt that lasts longer while the oil change and bel change intervals have also been shortened.
Not that great, mine is getting a new engine and it’s not even two years old, followed Ford service intervals to the letter. In my view they are shite wet belt crap. Ford offered me £50! Yes £50, this is costing me in lost revenue through work, and other associated costs.
@@Metal05 They are under warranty and the new engine will not directly cost you. Or shouldn’t unless they charge for fluids. Your new engine should have the modified parts.
Read my reply. Costing me so much money in other ways! I lost three boiler installs waiting for a courtesy van, I lost money on an event as I didn’t have wheels £500, need I carry on? I’ve read only tonight someone is on their 3rd engine on another forum. They are shite.@@hedydd2
From what year was the belt covered by Ford Warranty and for how long from new? I have a 2020 290 and was wondering could get belt changed to be on safe side
This isn’t the point. I get what you’re saying though. So far being self employed I lost three major jobs because I didn’t have my van with tools in it. The hassle of losing time on other jobs phoning Ford U.K. lost time and productivity, this amounts to about £5k. It’s diabolical from a company Fords size. I will never purchase this crap again. I hoped and prayed it would be ok. I didn’t even want a Ford custom. I’d ordered a VW, but they cancelled it due to chip shortage and loom issues around covid time, 🤷🏼 go home to your partner or bank manager and say you’ve lost £5k this month! @@hedydd2
Very informative lads 👍
Hi I've similar van mines an 18 plate done 68,000 mile I've heard some real horror stories about belt failure on these vans so good to see How its done and the mileage u advise to get it replace. How much roughly would I be looking to be paying.
They say 150,000 or ten years whichever comes first, but no harm getting it done earlier for a peace of mind. Some of these vans are under recall by ford and if it snaps they put a new engine free of charge
Which vans are in recall please??
Hi great video. How many miles before replacement I've got a 2019 has done 80000 thank you
100000 miles or 72 months
Excellent explanation what is bolt in middle of timing cover for
The bolt is for waterplug.
Great work. Would you please link where to buy timing belt tools? Thank you
www.ebay.co.uk/itm/185201582224?epid=26044498544&hash=item2b1edfe090:g:2tEAAOSw8BxhesY4&amdata=enc%3AAQAHAAAA8HJMw18x9cy8WU%2FqBFUngxC2dCrb%2FOi7BvzOcOiLqkPcJvLZmSxVX19bsjgX%2BKGf0UGvomPVbw9mh%2BYIa5m0GdFUsOt%2FYeEQFL%2BGPhEtOUvmCdvblEjMM13forZ5B6gvdpkvLd5LBwoIbY4CsS8WKgarFgLY%2Fe5f06EnS%2BXCkzinV%2F8mNIjQ1BMzPU8DOfhcJhz1ABCCGQAbOt%2FUTyKTYJjFhPn%2BfND1122OHMv8ZfCuCuLoLCGQ7lmzVZvaryNvwDut9M22V3kJiCXX5j7zU9sEWUQatUES%2FxjoQtWp%2FZGOuet1IE%2FHfbOLd505OYydyQ%3D%3D%7Ctkp%3ABFBMzrC9t7ph
Great video. 👍 if you could do step by step with pictures and videos I will pay for that. Thanks
We will try our best to do so on the next transit we do and will get in touch. Thanks
@@enkamotors7012 Thank you
Can you tell me how/where you supported the engine to take the mount bracket off?
Use a jack from underneath put a wooden block and jack from gearbox closest point towards the engine. Be careful as there’s a sensor close underneath near the jacking point
Hello mate, does fuel pump needs to be locked/timed on these engines ? Thank you
As long as the fuel pump isn’t removed no need to lock whilst doing cam belt change
Can you just take the sump off to check for delamination of the belt or do you have to have the belt etc done aswell
If you take off the oil pump as well as the sump then you’ll be able to check a part of the belt but you won’t be able to see the whole belt in order to determine if there is damage, and if so the extent of it. Hope that was helpful
Is the crank on a keyway ? So not free running like the old petrol fords? Can i just mark the bottom and pin the cams aye?
As long as your timing belt hasn’t snapped, you can go ahead, pin the camshaft and mark the bottom 👍
@@enkamotors7012 thanks for the reply,got one to do next week for the first time , had trouble with the kit for supplied ,wrong aux belt , crank bolt ect , mine has a damper pulley and requires a tool to remove it , so had to rebook.cheers
Nice work!!!!
Is the lower pulley floating? And do they need a torque multiplier to tighten the bolt back up?
20 nm 70 nm 150 nm loosen the bolt 90 degrees
100 nm 300 nm 90 degrees
@@enkamotors7012 pretty tight then 😮
How much cost to replace timing belt for 17 plate 130 hp euro 6 same body like this?
In the Ranger it is a simple job that takes no longer than changing many dry timing belts. There is less room and therefore it is more difficult for transverse engines fitted to front wheel drive Transit.
How many Time the remplacement ? Please
Good video m8
I hear there is a recall by Ford who will do engine replacement if you have a failure due to belts under 100k miles.
The recall is only for the 2017 models I believe. For the 2017 model they replace the timing belt and if the timing belt has snapped, they change the engine also
👍👍👍
How much does this cost roughly please I’ve got this engine in my focus mk4
I don’t think the focus has this engine. You might have the 2.0 Diesel engine but not an Ecoblue one. I’m sure it is not a wet belt that you have.
@@enkamotors7012it is a 2.0 eco blue I’ve got it’s mk4 focus with 8spd auto box and they told me it’s a wet belt
How much engine oil does it take? Many thanks 👍
9.8 litres
@@enkamotors7012 thanks. Had a bit of a nightmare. All done. Came back from road test, oil leaking out quite bad. Removed crank pulley, bit of the seal is pealed off. Very strange not sure how. Have ordered up a new seal.
Not something you may have come across?
Appreciate the help 👍
@@saanchips9087 did you replace the timing belt cover? Or use the old one? Also if you did replace it was it a genuine part or aftermarket?
@@enkamotors7012 i replaced the cover, just confirmed its a non genuine cover, came with seal fitted on. They have supplied a new seal under warranty but just very strange for a crank seal to tear off like that.
Is it not 13 rotations of the crank
How much does it cost for belt replacement? Cheers
02088842200 call us 9 am 6 pm pls.
Cost me nearly £1000 😢
@@kelvinrogers6472 Is that including genuine parts from ford?
My vans been in ford for a week now got it recovered to my usual garage and they said it was cam belt but could be under a recall so I called ford and they said they’d look at it so recovered it to Ford and haven’t heard anything back yet , from what I’ve hearing though from folk with similar issue it’s 8k for new engine😢
Yes Ford does do a recall on these engines but not every vehicle is covered on the recall so they will have to check.
Thanks mate when I called they said it was under a recall and they’d have a look at it but not heard anything and hard to get hold of them when calling .
What mileage was this carried out at mate?
ford recommended 150000 miles or 10 years. This vehicle was 100.000
@@enkamotors7012 how much does this cost thanks buddy
@@johnboy1042 at ford about 800€ whitout oil change !
As you can see ….
Drinking game.
Hi mate, i have timed everything up and put belt on, rotated the engine 7 times, my crank lines up, fuel pump lined up after 2 1/4 turns but my cams are facing 180 out. Facing opposite to the pin holes. Engine turns ok by hand. Is this ok?
you have turn the camshaft 7 times = crankshaft 14 times
@@enkamotors7012 oh ok, so after 14 crank turns i should have the crank marks lined up and both cam pins alined? Thanks
How did you or what did you use to support the engine once you got the engine mounts off?
Because we’re removing the oil sump we lift from under the gear box
@Enka Motors Trolley jack underneath the gearbox? if so please let me know am working on one at moment.
Can someone tell me the torque setting crankshaft pulley Bolt
1 stage 10 nm 2 stage loosen 60 degrees 3 stage 20 nm, 4 stage 70 nm, 5 stage 150 nm, 6 stage loosen 90 degrees, 7 stage 100 nm, 8 stage 300 9 stage 90 degrees.
Dont go near a new transit with wet belt. Only matter of time when it snaps. n Thats your lot! 😢
Great video. Absolutely crap engine. Insanity that there is a rubber belt running in oil that is subjected to contaminants and extreme heat
Reines Reinigungsvideo. Zeig doch mal wie die Steuerzriten richtig eingestellt werden.
What a horrible engine