As a CertainTeed video I am surprised at 1.13 where the post is adjusted with a mallet without a wood block for protective support. Yet in the installation instructions provided in PDF form it says " To lower a post, place a wood block from corner to corner of the post and carefully tap with a mallet • Never strike the PVC post without a wood support"
We used to set n build same day until we found that wind and weight of sections messing up post outta plumb... I would NEVER set and build the same day, but that's just me
Best method is making all sections same length but reducing length if necessary. Cutting panels before installing them. Of course a section that is attached on a side like an L shape would be cut on site also.
Hinges were not installed to certainteed specs....the top of the top hinge should have been aligned with bottom of top rail . And bottom of bottom hinge should be in line with the top of bottom rail.....sorry guys !
beautiful ..and very nice style .
As a CertainTeed video I am surprised at 1.13 where the post is adjusted with a mallet without a wood block for protective support. Yet in the installation instructions provided in PDF form it says " To lower a post, place a wood block from corner to corner of the post and carefully tap with a mallet • Never strike the PVC post without a wood support"
I saw that, too.
Nice goods! Is that available in a Pennsylvania? I’m near Philly. Youse guys do nice work by the way!
We used to set n build same day until we found that wind and weight of sections messing up post outta plumb... I would NEVER set and build the same day, but that's just me
Wen a section is not the same length do you cut on site to fit the panel?
Best method is making all sections same length but reducing length if necessary. Cutting panels before installing them. Of course a section that is attached on a side like an L shape would be cut on site also.
Is that a wood post the sleeve goes over?
I just had your Bufftech fence installed in the Sierra color...do you make post mailboxes to match your fences? I would love to have that.
@Nelson Dariel great...please post a video of the finished product. Thank you👍
Is the gate or gate/post not leveled
Both
Langworth Shoals
Hinges were not installed to certainteed specs....the top of the top hinge should have been aligned with bottom of top rail . And bottom of bottom hinge should be in line with the top of bottom rail.....sorry guys !
Have a hole in middle panel, can top rail be disassembled to replace board?
David Pond yes it can be removed and re installed with no hassle
Is it better to run a string at the top of the fence and at the bottom?
Yes, not sure why they didn’t
If you need a string to see three post even your blind as a bat!
Gap on gate is off!
Bechtelar Plain