Hi, I own a 2001 SE too. I replaced with TYC ones, the dark version too. But in highway, using high lamps, I noticed that the illumination was poor. I used LEDs from auxito and first thought that was the problem, but replaced with halogen new and the same happened. I suspect the dark headlight versions are the culprit, or maybe the brand. Before I had installed Depo and I haven't had this issue. Did you notice the same using high lamps? Ty
My replacement headlight casing from Ebay looked great for a few months but they started to fogging up inside when rain comes. It looks like they don't seal well. Did you have the same problem?
You need to buy a headlight restorer kit. Involves wet sanding the lenses with 1500-2000 grit sand paper and high speed polishing with a dual action polisher. amzn.to/3M3Aeb0
eah car 06 Sentra SE headlight on passenger side isn't working . it's not the bulb , nor fuse checked both visually and with test light both tiny lil metal exposed where I'm supposed to on top of fuses . Are there relays for each headlight and where are they ? I've looked up relay diagrams can't find this headlight relay . Does it have any ?
HELP .I bought Auxito h13 20000 lumens for my nissan sentra 2004 1.8. However I have been unable of placing the bulbs in the 9 -3 position. I doesnt matter how I try to move de bulb , it always stay in the 5-11 position. Is there a way to change the position or fix the position of the bulb? like the other models that use a screwdriver?
Honestly I cant remember because this was almost 4 years ago I did this project. Looking at the video though it looks like the front bumper was actually supposed to come off first to gain proper access to those lower clips and mounting hardware. This was my sisters old car and the front end had been in an accident and did not line up properly. I think this is why I was able to just yank the light off the way I did. When you play back the video it looks like the retention clips from the OEM light broke off or slipped off. Not sure if this will help you. But good luck to you and thanks for visiting my channel. Josh
Wow they look much nicer, they are way better than the stock lights
Hi, I own a 2001 SE too. I replaced with TYC ones, the dark version too. But in highway, using high lamps, I noticed that the illumination was poor. I used LEDs from auxito and first thought that was the problem, but replaced with halogen new and the same happened. I suspect the dark headlight versions are the culprit, or maybe the brand. Before I had installed Depo and I haven't had this issue. Did you notice the same using high lamps? Ty
what kind of light is it?
My replacement headlight casing from Ebay looked great for a few months but they started to fogging up inside when rain comes. It looks like they don't seal well. Did you have the same problem?
Wow, that is to bad. Mine did not have this issue. Did you check all the rubbers were tightly sealed around where bulbs go in.
What kind of bulb is used in a 2001 Nissan Sentra? and are these headlights any good?
I cant remember, I sold that car 5 years ago.
Thanks bro just bought the same ones
Glad I could help, these look great compared to old dingy worn out oem's.👍
Can you drop the links for the headlights, thanks for the video!
Do you notice your headlights are always on? even you switch them off during morning the headlights remain on ?
Do you know how I can get rid of the fog on the stock headlights ones?
I have some fog(I think) on the outside and I don’t know how to get rid of it
You need to buy a headlight restorer kit. Involves wet sanding the lenses with 1500-2000 grit sand paper and high speed polishing with a dual action polisher. amzn.to/3M3Aeb0
eah car 06 Sentra SE headlight on passenger side isn't working . it's not the bulb , nor fuse checked both visually and with test light both tiny lil metal exposed where I'm supposed to on top of fuses . Are there relays for each headlight and where are they ? I've looked up relay diagrams can't find this headlight relay . Does it have any ?
HELP .I bought Auxito h13 20000 lumens for my nissan sentra 2004 1.8. However I have been unable of placing the bulbs in the 9 -3 position. I doesnt matter how I try to move de bulb , it always stay in the 5-11 position. Is there a way to change the position or fix the position of the bulb? like the other models that use a screwdriver?
did you figure it out?
@@slavtune yes mate, I try and try and at the end I was able to do it. I proved different positions and they are now installed and working properly.
@@luckychap7646 So what kind of lights did you get? Are they any good?
@slavtune Auxito h13 20000 lumens, they are quite good and I haven't had any problem yet.
How did you get the clip on the bottom out so easily?
Honestly I cant remember because this was almost 4 years ago I did this project. Looking at the video though it looks like the front bumper was actually supposed to come off first to gain proper access to those lower clips and mounting hardware. This was my sisters old car and the front end had been in an accident and did not line up properly. I think this is why I was able to just yank the light off the way I did. When you play back the video it looks like the retention clips from the OEM light broke off or slipped off. Not sure if this will help you. But good luck to you and thanks for visiting my channel. Josh
How to order
I bought these on Ebay a few years ago. I am not sure if they are still offered. I did place a link in the description.
Was that a GTR I just seen 😯😯😯
Yes sir, that is by beloved R32 GTR