This video was 100% straight forward. I'm switching out the front grill on my Altima. I love the step by step instructions very hepful thank you so much
Your video looks to be straight forward. I need to swap out the headlight assemblies on my wife's Altima. I'll be using this as a reference guide. Thanks.
That is for a tow hook connection. If you look where the spare tire is there is a big screw with a hole on one end. Just open the little square flap and screw that piece in there so you can pull the car with a strap without ripping off the front bumper.
Very informal video, however I do not trust myself doing this sadly lol I just ordered the parts. As a fellow NJ resident, I'll rather pay for you to put it on. Please contact me if you can, I have Nissan 2014. I'll provide pictures, let me know, Have a blessed day sir!
it's a Trim Removal Tool, specifically for Pins. You should be able to find it in just about any Automotive Store, like O'Reilly's, Auto Zone, Napa, etc... Edit: I just realized i commented on a 3yo post and that you probably already solved it yourself. :D
That's a job doing it just by yourself. Two more hands would have been helpful, especially putting it back on. Plus the two hands could have been the camera man while you did the hard work. :) Good job keeping it to the point and also pointing out things other videos left out.
Beautiful, If the front license plate isn’t required in your state… I Would leave it as is. 2015 Altima Owner Here.. My headlights are stressing me out.
I wish you would have shown us how to remove and replace the turn signal lights and the housing as well as going step by step with some other parts that you skipped through. Good job on what I did see though.
I’m currently trying to replace my front bumper and the issue I’m having is how to get the turn signal light and fog lights switched out. The fog light has two 10mm bolts, but I still haven’t been able to figure out how to get the turn signal lights out. The metal clips come off the plastic and you can push the tabs through then on the sides. But, there looks like there is also a teeny tiny bolt (def not 10mm) that has to come out as well. Any help or insight you can give in trying to remove the turn signal lights is greatly appreciated.
dude the patience you have is heroic. i wuld have lost my shit after removing 5 bolts.
Thank you for uploading this video! I had to change my headlight assemblies and after watching this I went into the job fully prepared. Thanks again
This video was 100% straight forward. I'm switching out the front grill on my Altima. I love the step by step instructions very hepful thank you so much
Your video looks to be straight forward. I need to swap out the headlight assemblies on my wife's Altima. I'll be using this as a reference guide. Thanks.
Need to swap the defective headlights on mine. This is definitely helpful as a guide
thank you. i needed to replace my grill and your video probably saved me an hour.
I'm actually doing this tomorrow. Same year same car. Thanks for the video it will help for sure
Glad it helped
This was sooo helpful thank you for making this. Glad I could do it myself without overpaying at a shop.
This video really helped me out. Thank you
8:53 I think that’s where the front radar sensor is in some models. Thanks for the informative video
Thank you
Two years later (in French accent)… I believe that's the Tow Hook Cover.
That is for a tow hook connection. If you look where the spare tire is there is a big screw with a hole on one end. Just open the little square flap and screw that piece in there so you can pull the car with a strap without ripping off the front bumper.
All these videos are awesome. My problem is that our Altima has an additional molding around the wheel well. Not sure how it’s attached. 😢
Of course the hardest thing putting the bumper back on is what you skip lol
Just plug and play
I'm about to replace a new used one. What step did he skip?
Thanks man but where’d you order the bumper from man
Where did you order your bumper from cause I have the same year and model
How did this bumper hold up compared to the OEM after the replacement? I'm thinking of doing it to mine.
Thank you I am a female about to replace mines ❤
there is not much of a bumper under that cover is there? i’m glad for a 2nd reason i watched your video. thank you for sharing this.
What size bolt did you use?
Can you order the bumper color to match your car?
Very informal video, however I do not trust myself doing this sadly lol I just ordered the parts. As a fellow NJ resident, I'll rather pay for you to put it on. Please contact me if you can, I have Nissan 2014. I'll provide pictures, let me know, Have a blessed day sir!
Where do you buy your bumper in black?
Awesome video !!!👍
Looks great!
The screw under the wheel, did it come with a washer ? I totally misplaced and forgot which one goes there
How did you remove the blinker harness that connects to the bumper by the fog lamp?
Exactly,before you get it out,take out the harness,and the way he get that bumper out 🙄
What screws are needed for the bumpers
Omg that's how its shipped? Nty I will buy used in my area. Thanks for vid
Hate that they glue the front plastic on the headlight assembly, but at least the replacement part will be easy to install, thank you fam
Did u have to paint it or did it already come that color
It came painted to match card color. Had to provide the seller paint code
Your Nissan is graphite blue right? Did your new bumper come that color or did you get it painted?
It was black. The replacement bumper is not Oem but it came painted color matched
@@jkhan08 what website ?
where can I order. the front dumper? for the nissan altime 2015 SL
What tool did you use to remove the push pins??
it's a Trim Removal Tool, specifically for Pins. You should be able to find it in just about any Automotive Store, like O'Reilly's, Auto Zone, Napa, etc...
Edit: I just realized i commented on a 3yo post and that you probably already solved it yourself. :D
@@Seluecus1 haha all good! Did fix it eventually 😁
Hi, can you tell me a list. of tools I need to remove the bumper and headlights, please?
10mm socket ratchet flat and Phillips head I think that’s its
Good post.
Jersey Strong
Very helpful keep it up
well done.
That's a job doing it just by yourself. Two more hands would have been helpful, especially putting it back on. Plus the two hands could have been the camera man while you did the hard work. :) Good job keeping it to the point and also pointing out things other videos left out.
how did you get it the same color as your car ?
Beautiful, If the front license plate isn’t required in your state… I Would leave it as is. 2015 Altima Owner Here.. My headlights are stressing me out.
is the bumper painted or just primed
definitely painted in, when you buy the bumper and heat dry it, it will look like 0:50 where its all faded.
Painter and primed.
I wish you would have shown us how to remove and replace the turn signal lights and the housing as well as going step by step with some other parts that you skipped through. Good job on what I did see though.
I’m currently trying to replace my front bumper and the issue I’m having is how to get the turn signal light and fog lights switched out. The fog light has two 10mm bolts, but I still haven’t been able to figure out how to get the turn signal lights out. The metal clips come off the plastic and you can push the tabs through then on the sides. But, there looks like there is also a teeny tiny bolt (def not 10mm) that has to come out as well. Any help or insight you can give in trying to remove the turn signal lights is greatly appreciated.
Exelente trabajo
Where did yu buy yur parts
Amazon from MBI auto
Where did you buy the bumper?
Amazon from MBI auto. You have to give them the paint color code and they’ll paint it to match your car.
How long did it take using the hair dryer to get the bumper into its Useable shape?
I had one shipped to a Nissan Dealer and they say it's UNUSEABLE!!
I gave up with the hair dryer. I just left it open and it slowly opened up.
good job Thank you
Good job, looks great!
Dm tht shit lot of work
Looks great! What a pain though. Probably saved a lot of money from not going to a body shop.
You need a camera man lol I appreciate your effort but this doesn’t give me confidence to do it myself.
Let me guess paint a part. I know because that's where mine come from
You don’t look like you know what you’re doing.