Apply for Rhino for Architects Training ✔ howtorhino.com/apply Extended Tutorial + Extra Project Files 👉 www.patreon.com/posts/41061866 RUclips Tutorial + Project Files 👉 www.patreon.com/posts/41062711 Free How to Rhino Community 👉 www.skool.com/howtorhino
Hey Romain, Thanks! Glad you like the tutorial! If you'd like to take this a step further and have a complete step by step approach in learning Rhino and Grasshopper that includes our personal coaching, you may want to check out our Rhino for Architects 2.0 Course! Please reach out and send me an email at dusan@howtorhino.com if you're interested and I'll tell you a lot more about it there and share the course platform with you as well! Cheers! :)
hey, great tutorial. I am trying to go further with something similar and make the narrowing "tube" out of bricks(like a chimney) but if I leave the same number of divisions on both ends it is not working. Do you have any idea how to overcome that?
Hey Abhoy, Cool, glad you like it! Thanks for your comment. If you'd like to take this a step further and have a complete step by step approach in learning Rhino and Grasshopper that includes our personal coaching, you may want to check out our Rhino for Architects 2.0 Course! If you're interested please reach out and I'll share the course platform with you! Best!
When I use the number slider that is attached to addition, instead of moving the bricks away from each other horizontally it moves each row away from each other vertically. Do you know what the issue is?
You're welcome Liang. On the following page you can find more information about syntax for Split Mask: www.grasshopper3d.com/m/discussion?id=2985220:Topic:950635
While making a CULL PATTERN, instead of selecting single alternate lines, it's selecting two alternate lines. How could I fix that? I'll be gald if someone can help me out. Thanks!!!!
you didnt explain how to write the last panel ( the one that goes in P in the cull pattern), it would be great if you explain more in detail... seems like you think every one is familiar with this... im upset
Hi Brian, Sorry for skipping that part. Once you type 0 and 1 in the panel you should right click on it and uncheck "Multiline data". If you still can't make it feel free to download the files from our Patreon page: www.patreon.com/posts/41061866
Hi Domenico, I am sorry to hear you didn't find our tutorial helpful. If you are interested to get the project file with pre-existing curves you can find it on our Patreon page: www.patreon.com/posts/41061866
@@HowtoRhino how to work out parametric forms for a properly defined elevational lines (for eg.) a polygonal shape. Some bricks need to be cut on the edge because of the random elevation shape can it be achieved using grasshopper?
![Twenty One Pilots - The Line (from Arcane Season 2) [Official Audio]](http://i.ytimg.com/vi/XCz7WUotXs8/mqdefault.jpg)
Apply for Rhino for Architects Training ✔ howtorhino.com/apply
Extended Tutorial + Extra Project Files 👉 www.patreon.com/posts/41061866
RUclips Tutorial + Project Files 👉 www.patreon.com/posts/41062711
Free How to Rhino Community 👉 www.skool.com/howtorhino
Great tutorial thanks! 👌
Hey Romain,
Thanks! Glad you like the tutorial!
If you'd like to take this a step further and have a complete step by step approach in learning Rhino and Grasshopper that includes our personal coaching, you may want to check out our Rhino for Architects 2.0 Course! Please reach out and send me an email at dusan@howtorhino.com if you're interested and I'll tell you a lot more about it there and share the course platform with you as well! Cheers! :)
Great video, subbed!
Thanks Stefan! :)
hey, great tutorial. I am trying to go further with something similar and make the narrowing "tube" out of bricks(like a chimney) but if I leave the same number of divisions on both ends it is not working. Do you have any idea how to overcome that?
Always a great one
Thanks Div!
Awesome ....
Hey Abhoy,
Cool, glad you like it! Thanks for your comment.
If you'd like to take this a step further and have a complete step by step approach in learning Rhino and Grasshopper that includes our personal coaching, you may want to check out our Rhino for Architects 2.0 Course! If you're interested please reach out and I'll share the course platform with you! Best!
When I use the number slider that is attached to addition, instead of moving the bricks away from each other horizontally it moves each row away from each other vertically. Do you know what the issue is?
Hi thx for the turtorial. I am wondering how do you enter a series syntax in panel? Thxx
You're welcome Liang. On the following page you can find more information about syntax for Split Mask: www.grasshopper3d.com/m/discussion?id=2985220:Topic:950635
@@HowtoRhino Thank you SO MUCH!!
Even I followed your steps of creating curve and connecting to the LOFT, there is no results from my rhino...may I know what is the reasons please?
12:41 the syntax makes the split tree red? why?
Struggling to add a panel with data formatted correctly for the Cull Pattern components input. How do you format the panel like a table?
I see now, for anyone else - Panel options need to deselect "Multiline Data"
While making a CULL PATTERN, instead of selecting single alternate lines, it's selecting two alternate lines. How could I fix that? I'll be gald if someone can help me out. Thanks!!!!
why is the bounding box componenet required ?
The orient output isn't aligned well with the curves, i troubleshooted every thing its not working!
hello that parametric family can be sent to Revit? is there any video? Thank you
Double Dispatch component also work on min 11:52
Sure! You can use Dispatch component as well :)
how to export these for the construction drawings??
Rhino inside Revit
the masks of "Split Tree" doesn't recognize the number panels (0,2,...)
You should put curly brackets {0,2,...} 12:12
@@HowtoRhino thank you !
you didnt explain how to write the last panel ( the one that goes in P in the cull pattern), it would be great if you explain more in detail... seems like you think every one is familiar with this... im upset
Hi Brian,
Sorry for skipping that part. Once you type 0 and 1 in the panel you should right click on it and uncheck "Multiline data". If you still can't make it feel free to download the files from our Patreon page: www.patreon.com/posts/41061866
14:03
did you already have pre exsisting curves on rhino or? this tutorial was not helpful
Hi Domenico,
I am sorry to hear you didn't find our tutorial helpful. If you are interested to get the project file with pre-existing curves you can find it on our Patreon page: www.patreon.com/posts/41061866
@@HowtoRhino how to work out parametric forms for a properly defined elevational lines (for eg.) a polygonal shape. Some bricks need to be cut on the edge because of the random elevation shape can it be achieved using grasshopper?