Any idea if SRAM eTap's OSPW would work with a Lindarets Road Link to accommodate a 40 teeth cassette? Shimano's short cage rear D is able to fit a 32 teeth with B screw turned in and with the Lindarets Road Link can fit a 40 teeth cassette. I see that the OSPW can fit 32 teeth cassette so am guessing that its possible. I'm keen in trying this out.
When adjusting the chain length, do you recommend adjusting the "B" adjust screw in order to obtain the same 6 to 8 mm gap between the pulley wheel teeth and the teeth of the largest cog on the cassette with the OSPW compared to the factory SRAM guide as explained by SRAM? Thank you in advance.
Unfortunately we have also struggled to find an adequate replacement for this. We can confirm that the door screw is the same as the other screws on the bottom of the derailleur body.
Too many wide angle shots - when he says he is installing something the camera view should be zoomed in on the detail but instead the camera goes to the back of the room and you can see nothing. Having black gloves on when working with a black piece of hardware and videoing from two or three metres away means you can see nothing. Try again folks.
Thank you for this video. I was able to change it on my first attempt. Great step by step tutorial!
Really very interesting, I was able to do this job without anyone's help. Grazie 🇮🇹
can you describe when the other spring tension settings would be used? The low/med/high. Thanks.
Can I use Ceramicspeed grease for the bearings when training in poor conditions?
Hi Ronald. When training in poor weather conditions we recommend using the CeramicSpeed LongLife Grease for increased protection against corrosion.
sweet, worked a treat :-D
Excellent clear video, thanks.
that´s one stylish super-Mechanic ;)
Any idea if SRAM eTap's OSPW would work with a Lindarets Road Link to accommodate a 40 teeth cassette?
Shimano's short cage rear D is able to fit a 32 teeth with B screw turned in and with the Lindarets Road Link can fit a 40 teeth cassette.
I see that the OSPW can fit 32 teeth cassette so am guessing that its possible. I'm keen in trying this out.
When adjusting the chain length, do you recommend adjusting the "B" adjust screw in order to obtain the same 6 to 8 mm gap between the pulley wheel teeth and the teeth of the largest cog on the cassette with the OSPW compared to the factory SRAM guide as explained by SRAM? Thank you in advance.
Russia world cup
Will the OSPW be compatible with a 11-32 Cassette since the cage appears to be longer than the original short cage on the SRAM Etap rear derailleur?
Hi there. The OSPW System for SRAM eTap is perfectly compatible with an 11-32 cassette.
What are the benefits????????????????????????????? Compared to my Sram derailer????????????
great video, but background music is unnecessary.
So unnecessary JFC.
where to find a replacement screw for the door? :S so tiny and fragile..
Unfortunately we have also struggled to find an adequate replacement for this. We can confirm that the door screw is the same as the other screws on the bottom of the derailleur body.
Same question !!! Did you find the answer ?
@@patrickrenard1762 nope. Sold the groupset at the end and went shimano di2 12 speed
What's the name of the bike?
This was a Cervelo S3, Bigla Team edition paint.
It's a T7 TORX bit
Mine is T6, not T7
Too many wide angle shots - when he says he is installing something the camera view should be zoomed in on the detail but instead the camera goes to the back of the room and you can see nothing. Having black gloves on when working with a black piece of hardware and videoing from two or three metres away means you can see nothing. Try again folks.