If Cam doesn’t want to wear safety glasses 🤷♂️ ok. But let me put him into contact with a buddy of mine who went to the ER to have a splinter dug out of his eye, and the level of suck it entailed. Love ya Cam. BTW, I’m getting cataract surgery next week. It’ll be so nice to actually be able to see again.
I full understand what you guys are doing. You showed my car on episode 347. Red 68 Mustang. My wife and I, with the help of your Videos rebuilt our car. We spent more time on trim and fastener than anything else. We bought bought screw kits for most every thing. Every screw had to be tag which location it came from. Remember it took use 2 1/2 years to dismantle and complete the car. We are still driving this car almost everyday and taken it on out of state trips. Keep up the good work and thanks for showing our car.
Oh the joys of working on a vehicle with an unknown past of maintenance and repairs.... NEVER know what you’ll come across, or how much headache it’s going to be....lol Not the right bolt/ screw ?? Just put something in it,, as long as it holds.... It’s only a problem when you go to take it back out...lol Love you guys... see ya in the next one...
A layer or 2 of painters tape on the opposite edge of a body panel really helps in not scratching the paint on that panel. But you guys knew that... ;-)
I've found that sometimes on the unknown like this finish, care is better than tape. I once pulled the prettiest swath of paint off of a car taping an edge lol.
Those bolts on the bottom of the fender near the door are always a pain. The nut clip usually breaks and the bolt just spins. I’m shocked your fender didn’t do the same
Both of the Ford pony car front ends are pretty close. Usually, it's about the same on the Cougars. The best recommendation would be to get a set of the Ford assembly manuals for the Cougar. That would show you where everything's at.
We Love our Lady Wrenchers! I follow folks like Fay Hadley, Bogies Garage, Flying Sparks. If Diona my missus wasn't so dang camera shy I'd have her on some.
Autogenerated captions are now live on this video! We've been trying to chip away at the back catalog to add captions to our older videos but when there's almost 1000 episodes it takes a lot of time. We have been adding them to our newer stuff for the past few months, if you stumble on anything that's missing captions from us please let us know and we'll try to rectify that.
"My body, my choice" made me spill my drink lol. Good job!
Edit: that ending lmao
Thanks. It was fun to shoot, completely off the cuff.
I love the way you guys banter, really keeps it interesting
Thanks!
“Who needs turn signals… Just put a BMW badge on it” 😂
Another great show guys! 🏁
Cam might be distracting sometimes, but he sure is funny, lol.
Jeff, remember that time you told Cam to "Leave the airgun, take the Cannoli."😄
Yes. I'm getting much more fond of air and electric wrenches.
This episode is bringing back memories of the “Night Mistress”.
One of the reasons I let my friend bring his car over was that it was a 67 Mustang. That and he needed my help lol.
Good stuff as usual. As a Cougar owner, I had to chuckle at the reference to the "complicated" '67 Mustang grille.
It's all relative aint it?
If Cam doesn’t want to wear safety glasses 🤷♂️ ok. But let me put him into contact with a buddy of mine who went to the ER to have a splinter dug out of his eye, and the level of suck it entailed. Love ya Cam. BTW, I’m getting cataract surgery next week. It’ll be so nice to actually be able to see again.
Good to hear real world
Glad you are getting that taken care of. I try brother...I try. I told him that he was going to take crap for not wearing them, he seemed very meh.
@@AutoRestoMod as long as he can take the “ told you so” LOL
Love the fact that you guys are already producing in the new shop! -TheMinion
DUSTIN!!! Yep. Work waits for no man!
I full understand what you guys are doing. You showed my car on episode 347. Red 68 Mustang. My wife and I, with the help of your Videos rebuilt our car. We spent more time on trim and fastener than anything else. We bought bought screw kits for most every thing. Every screw had to be tag which location it came from. Remember it took use 2 1/2 years to dismantle and complete the car. We are still driving this car almost everyday and taken it on out of state trips. Keep up the good work and thanks for showing our car.
You are welcome! Glad to see you are still watching us!
Another great job guys.... And yes, we come to your channel for tech and knowledge, but we stay for banter !!!
Lol thanks!
As always Great information, thanks for sharing Jeff....
My pleasure!!
Oh the joys of working on a vehicle with an unknown past of maintenance and repairs.... NEVER know what you’ll come across, or how much headache it’s going to be....lol
Not the right bolt/ screw ?? Just put something in it,, as long as it holds.... It’s only a problem when you go to take it back out...lol
Love you guys... see ya in the next one...
Thanks Moe! And that is absolutely the truth. I've seen some crazy stuff over the last few years for sure.
A layer or 2 of painters tape on the opposite edge of a body panel really helps in not scratching the paint on that panel. But you guys knew that... ;-)
I've found that sometimes on the unknown like this finish, care is better than tape. I once pulled the prettiest swath of paint off of a car taping an edge lol.
@@AutoRestoMod then put it on the part you are removing forever... lol. And it's not a Honda...
Jeff, let me know when I can bring down my 67 Mustang Coupe and you can see what a shop shouldn't do.
Right?! Maybe late summer. We'll come get it.
Thanks for the video.
You bet
I'm in love with that mustang!
I think it is pretty cool too. I'm hoping the owner will be happy with our fixes.
CAM’S SHOES! What are those?!
Not sure who makes them. Think they are called toe shoes? He says they are amazing. I dunno.
May need to check the vent area with the fender off. This is the time to repair the drivers side air vent.
The cowls are good on this car. But a good point.
Headlight enclosure.😉
Another fine choice.
Jeff, "Make us an offer we can't refuse."
Those bolts on the bottom of the fender near the door are always a pain. The nut clip usually breaks and the bolt just spins. I’m shocked your fender didn’t do the same
Somebody had been into the car within the last 10 or 15 years. That usually makes a difference.
Is it the same process on a 67-68 cougar?
Both of the Ford pony car front ends are pretty close. Usually, it's about the same on the Cougars. The best recommendation would be to get a set of the Ford assembly manuals for the Cougar. That would show you where everything's at.
Ha! I'm an over 40 female! I'm part of the 2%! 🤔...I'm officially a minority... 🤯
Love y'all!
We Love our Lady Wrenchers! I follow folks like Fay Hadley, Bogies Garage, Flying Sparks. If Diona my missus wasn't so dang camera shy I'd have her on some.
Subscribed!
Thanks Danny
I'm an under 40 man child 😅🍻🇺🇸
Weird, I'm an over 50 man child striving to never grow up!
@@AutoRestoMod Peter Pan Pony Car Special - let's go!!!
26 gues I’m old 😅
Scotchlock!…..Drink!
I'd have a drinking problem if I had a tipple for every time we've found a scotch lock in a car lol.
Seeing damage so close to that VIN. cringe.
Lol yeah the owner got lucky on this one. I'm going to let our buddy in Atlanta work on those rust spots that are on the top of the fender.
useless when i cant have captions eg: CC
Autogenerated captions are now live on this video! We've been trying to chip away at the back catalog to add captions to our older videos but when there's almost 1000 episodes it takes a lot of time. We have been adding them to our newer stuff for the past few months, if you stumble on anything that's missing captions from us please let us know and we'll try to rectify that.