Just adding this for ppl just looking into this. Don't count EZ-Lip out. It is more flexible and easier to contour around corners. The All- fit is harder to get looking perfect. Since it is sturdier it waves in different directions after making a turn, causing an odd fitting lip. This is just my experience.
M 6 work with what you got bro. Please don’t tell me your one of those people who laugh at budget builds. Honestly it looks pretty good. There’s no reason to go to a body shop and pay a bunch more.
JJtreads I mean I want to do this to my car, but I want the outside to like nice cuz all my money is going to the engine at the moment and the exterior is stock af
I Made these for my Car back in 2009 it started on a small forum. The Eclipse and Civic Hatched forum . We also Build side skirt using the wood that run around your room the bottom pieces. That 3M Tape merged into my car the lips is incredible durable. Still standing after all these years
I think the ALL-FIT lip is much better for quality and longevity but for anyone who wants to install the ALL-FIT lip without screws you may have issues keeping it on your car. I installed 2 different ALL-FIT lips on my car after properly cleaning my bumper and had it fall off within a week without the screws. I never used the screws because I installed it on my brand new car and didn't want to drill holes in my bumper even if they wouldn't be seen. I have now put those 2 lips on my 2 other cars with screws and they have held up just fine. I have now installed an EZ lip on my new car and it has held up just fine without any hardware. For anyone who is just going for the look and isnt worried about scrapping anything or doesn't want to drill holes in your bumper I would recommend the EZ Lip
@goatedsj I've yet to have it fall off. I replaced the one of the front because I damaged it but it protected my bumper and the one I replaced it with has been in the car for the better part of 4 years and still holding strong and even though it isn't the strongest it had held up remarkably well even after a few times contacting the ground. I have them on the sides and well and both those are 6 or so years old and still holding.
I was literally about to go and buy an ez lip. Then accidentally stumbled across this and I'm glad. Thanks man. About to order it. Hopefully it looks good on my focus st
descriptive, detailed, visually easy to follow, great comparison points of two different brands. very well thought out video. keep up the good work. I'm going for the All-lip for my 7th Gen maxima.
I had the ez lip on my dart and I hit a curb once and it was fine. You would have to really crush it between the bumper and curb to rip it but if the price is no different then go for it
I Bought the EZ-Lip. Here is the verdict. Its "OKAY" for side skirts and Rear bumper. It is Not great for the Front Bumper. I did all the precautions from heating the adhesive to cleaning extensively with alcohol and drying before applying. After 1 week of driving its already started to peel from wind acceleration when driving. I will definitely go for all Fit next time i replace the front bumper.
I've had my ez lip for 6 months now and no problems, i didnt de grease and ive trashed it into some pretty bad drive ways and it hasnt shown signs of peeling. i drive a 04 wrx and its fine
I've had my ezlip pro on the front of my car for about 5 months now. Literally scraping my driveway every single day and multiple track events with speeds above 120mph. Mine is still perfectly fine. I'm guessing there was something that compromised the adhesion during install.
yep he's definitely right! that ezlip wast strong got the two lip, compare the two and ezlip break easily. all-fit lip was really durable. 5star for the all-fit lip (1star for ezlip)
We have the same thing on taobao in China the Samurai brand car lip which is identical to the all fit lip，made of rubber not foam rubber like the one on ebay and EZ lip， and the samurai lip is selling for $5 in China, The people behind the all-fit lip is making big money for sure.
I had EasyLip on my car for 4 years without any issues, then replace it in 2015 with EasyLip Pro which is the same harder rubber as All Fit and it's still on my car. Both product have a different look/shape/weight/rigidity/price. Depends what you want.
This is an old video. I just got a new car and have been checking out what I want to do for mods. The All fit on my BMW E92 was very low. I put the all fit on my car. I scrapped it a million times. I parked against curbs (In the beginning). Frankly it made the car too low for me. But it never screwed up. The screws made it hold like steal. I give all fit a 20 out of 10 stars!
I run a EZ lip on my Porsche Cayman S. It’s super great. I would buy a nice carbon fiber lip but my car is lowered a lot and I always scrape my lip. If I had a 1k$ lip it would brake alot on me
Juan pablo Hurtado it might slightly. Lots of cars have similar air dams from the factory (albeit tested to show actual efficient improvements). Air dams are a proven way to decrease drag and smooth airflow under the car
Just installed the all fit lip today, miles better then the EZlip. Had the EZlip before and it was super soft and scratched/ripped easily. Had to take it off cause it looked so bad.
awesome video my ez lip just arrived and i happened to come across this video looking for installation instructions glad i seen it im sold dont know what todo with the ezlip now though probably just put it on my lawn mower
AMAZING. Thank you so much. Thinking of rallying my Hyundai Accent but had no idea what these "lips" were. Glad to know how they work and the quality. I'll be glad to purchase "All Fit" and rep them as well.
Hmmm.... My 2004 Sebring needs a bit of a makeover. Got to fix the clear coat, spruce up the rims, a bit of front end work and deal with just one rust spot. This lip thing would be a nice mod being that the finish is red.
If you go ahead and just pull it off, it might. However if you use a heat gun, it will soften up the 3m tape and then removing it will be a lot easier.
EZ-Lip is cheaper though, but All Fit has a larger fitment. He said they were about the same price, but they are not. EZ-Lip is about $20 bucks top and All Fit ranges from $40 - $80 bucks, but that's Ebay prices. I haven't checked other sites, but I deal with eBay regularly.
You don't HAVE to drill in to your bumper. We just offer an added option for our customers instead of making all customers depending on simply 3M tape. All applications are unique, so we want to make sure all customers can have the correct hardware for a correct installation.
Helpful video! I'll go for the allfit as it performs better for the reason of installing it, do you have a video on how to remove the lip nice and clean?
Very well done, after having watched your video I wish I hadn't wasted 11. Minutes of my life watching another comparison video. From your after images it looks like you installed it more as a splitter than an air dam. Do you plan on doing the entire car?
@milanmastracci its this one of those links that you get paid when people click on it? its this your honest review of both products or or allfitautomotive sponsor You? I'm not affirming anything I'm just asking....
@@Butterking99 Then spray some paint over it. I mistakenly drilled holes on my car for the rear mud flaps and I had to paint the holes. No signs of rust so far.
ᑭIKIᑎ yeah I mean on bare metal a lot of people forget to repaint the screws and it causes issues, if you don’t paint it with a proper encapsulating paint that is.
I tried the samurai lip on my 08.its ok I guess.right in the middle where bumper bends up is where the lip didn't setup the same way on either side.its ok I guess.maybe I'm just a perfectionist or something or maybe it really doesn't look good to my liking...I get compliments though.thanks for the vid.
I wouldn't mind it if i could get away with doing a full car dip every 2 years but i feel like our winters are just too rough (and I'm too rough) on my car. Im guessing every spring you need to strip her down and cover her back up. I guess in a way thats cool too cuz we can be creative
Thats the beauty of this stuff though! Its durable, removable and affordable. If you prep the car well, it will easily last through the winter. Thats the main reason why I dip my car.
Great Video ! Didn't even know about the ALL FIT. Actually, I am going to wrap it in all white carbon fiber to put on my BRZ..........BAD ASS !!!! Thanks....
Hey there, just looking at the final product/after section of the video, your car looks like it has a fair few curves on the bumper. You definitely only cut a total of TWO triangles/V's?
I chose the cheap way and made my own with double sided sticky tape and garage door liner. It ripped in 2 weeks and was the biggest bitch to take out. Going to wait till spring to get the all fit lip or the sti lip.
I bought an STI lip for my car but didn't install it because not only did it not fit properly (end to end, it was close but not good enough for me), but it also had to be twisted to fit. The all fit lip can be cut to perfect size
milanmastracci Yeah I agree :) thinking about a HFP as well. Also I heard you have to cut pieces of the front and rear bumper but some people say you don't so I would test fit it without cutting it first :O just to be safe
No not at all. A muffler delete will only give your car some more noise and drone (potentially). It shouldn't harm anything or damage anything as long as you get it installed / install it correctly.
Thank you for the video. Now I have my mind changed and I am going to order the all-fit lip. By the way, is the all-fit lip you putted on a traditional size one or a medium size one?
+Mario Mcpherson what do you need it for? a jetta isn't a sports car..what are you going to bottom it out? you don't need it..waste of money these double sided tape lips are for ricers and posers
solid video! I was going to order the ez off ebay until I ran into this video - you saved from buying inferior product, thanks! how well has your all fit held up since this video btw?
What Optimal Temp is sufficient for the 3M to adhere? I ask this because i live in Alaska..and the Temps about 40-50 right now..so basically Fall Temps, could i still install this with those conditions?
+Christopher Williams The warmer the better. If its cold when you want to mount it, use a hair dryer or a heat gun to get it up to proper temperature. Try keeping it above 70 when you're installing it
I want to install this without drilling holes. I know to use the 3m but will I run into any problems since the end of my bumper where I would attach the lip is has some scratches ?
What do you guys think would look better on a corolla 2009-2011 the 1.5 in or 2.5? Trying to get a lip style like his but not sure what size would look better.
ok so on a modern plastic bumper cover I can see this working. So how about if the lip you plan to install it on is on an old school 80s car with a metal lower valance about half inch surface or less???
Joe joe It should still be able to adhere. The 3M double sided tape does a very good job. As long as you prep the area and remove any waxes, you shouldn't have a problem with the installation.
Just adding this for ppl just looking into this. Don't count EZ-Lip out. It is more flexible and easier to contour around corners. The All- fit is harder to get looking perfect. Since it is sturdier it waves in different directions after making a turn, causing an odd fitting lip. This is just my experience.
The downforce must be insane
69420 lbs downforce
@@williambrewer855 unlimited downforce
That's what she said
I got EZ lip on my car for 3 years already. Still looking good. It is easy to apply. All fit looks kinda hard to apply around the curve.
A dude rolled into a car meet with this shit on. Dude got laughed at. Don't put this shit on your car people, it immediately screams AutoZone mod
M 6 work with what you got bro. Please don’t tell me your one of those people who laugh at budget builds. Honestly it looks pretty good. There’s no reason to go to a body shop and pay a bunch more.
JJtreads I mean I want to do this to my car, but I want the outside to like nice cuz all my money is going to the engine at the moment and the exterior is stock af
@@user-fw3sw7qx1u fucked up, I wouldn't wanna be in that car community
@@jjtreads5472M6 is a scrub
I Made these for my Car back in 2009 it started on a small forum. The Eclipse and Civic Hatched forum . We also Build side skirt using the wood that run around your room the bottom pieces. That 3M Tape merged into my car the lips is incredible durable. Still standing after all these years
it really does look a lot better... great job bro
I think the ALL-FIT lip is much better for quality and longevity but for anyone who wants to install the ALL-FIT lip without screws you may have issues keeping it on your car. I installed 2 different ALL-FIT lips on my car after properly cleaning my bumper and had it fall off within a week without the screws. I never used the screws because I installed it on my brand new car and didn't want to drill holes in my bumper even if they wouldn't be seen. I have now put those 2 lips on my 2 other cars with screws and they have held up just fine. I have now installed an EZ lip on my new car and it has held up just fine without any hardware. For anyone who is just going for the look and isnt worried about scrapping anything or doesn't want to drill holes in your bumper I would recommend the EZ Lip
How did it hold after years?
@goatedsj I've yet to have it fall off. I replaced the one of the front because I damaged it but it protected my bumper and the one I replaced it with has been in the car for the better part of 4 years and still holding strong and even though it isn't the strongest it had held up remarkably well even after a few times contacting the ground. I have them on the sides and well and both those are 6 or so years old and still holding.
A friend of mine put an orange one on his yaris 3 years ago or more and still holding up fine and color still bright
I was 5 seconds away from going with EZ .. till I saw this .. good comparison. Changed my mind and went with All-Fit.
Thanks
Felix Cruz No problem man!! Don't forget to throw a big thumbs up :)
5 year update with All-Fit?
Anyone got this to their recommended/Ads after 6 years later.
Yes sirrr
Got it as an ad
Any real ricer would know to go with EZ-Lip because.....weight reduction!!!
@Trevon Adams not really a ricer then huh
How well would this work on a lowered Ford GT 2006 California style bumper already had to repair twice due to poor quality roads..
@@leonardkrauss8257 like shit bitch!
Don’t forget that it makes your car look lower too lol
Thank you so much for the video. I was going to get the EZ-LIP and its junk to me. I will get the better quality one.... Thanks again...
+sirjim777777 Glad it helped you out :)
I was literally about to go and buy an ez lip. Then accidentally stumbled across this and I'm glad. Thanks man. About to order it. Hopefully it looks good on my focus st
Great Video Dude! I like how you explained the curves. My package had no instructions, just the product! Your video helped a lot!
descriptive, detailed, visually easy to follow, great comparison points of two different brands. very well thought out video. keep up the good work. I'm going for the All-lip for my 7th Gen maxima.
Nice product pitch for All Fit Automotive
+Dale Ramcharan That's all I could think of having used both of these products. Little bias eh
+drstenso which ones better in your opinion
I'm really glad I didn't buy the ez lip for my dodge dart. This video really shows how flimsy the ez lip is.
Did you end up installing this on your Dart? I just got a Dart and am planning to do this.
I am ab to do the same on my dodge dart😂
I had the ez lip on my dart and I hit a curb once and it was fine. You would have to really crush it between the bumper and curb to rip it but if the price is no different then go for it
If you drive a dart the last thing I'd worry about was the longevity of the ez lip. It's gonna last longer then the car
I Bought the EZ-Lip. Here is the verdict. Its "OKAY" for side skirts and Rear bumper. It is Not great for the Front Bumper. I did all the precautions from heating the adhesive to cleaning extensively with alcohol and drying before applying. After 1 week of driving its already started to peel from wind acceleration when driving. I will definitely go for all Fit next time i replace the front bumper.
I've had my ez lip for 6 months now and no problems, i didnt de grease and ive trashed it into some pretty bad drive ways and it hasnt shown signs of peeling. i drive a 04 wrx and its fine
I've had my ezlip pro on the front of my car for about 5 months now. Literally scraping my driveway every single day and multiple track events with speeds above 120mph. Mine is still perfectly fine. I'm guessing there was something that compromised the adhesion during install.
yep he's definitely right! that ezlip wast strong got the two lip, compare the two and ezlip break easily. all-fit lip was really durable. 5star for the all-fit lip (1star for ezlip)
We have the same thing on taobao in China the Samurai brand car lip which is identical to the all fit lip，made of rubber not foam rubber like the one on ebay and EZ lip， and the samurai lip is selling for $5 in China, The people behind the all-fit lip is making big money for sure.
I had EasyLip on my car for 4 years without any issues, then replace it in 2015 with EasyLip Pro which is the same harder rubber as All Fit and it's still on my car. Both product have a different look/shape/weight/rigidity/price. Depends what you want.
Artie & Hemike did you use any clips on your ez lip, or just the 3m tape it comes with?
This is an old video. I just got a new car and have been checking out what I want to do for mods. The All fit on my BMW E92 was very low. I put the all fit on my car. I scrapped it a million times. I parked against curbs (In the beginning). Frankly it made the car too low for me. But it never screwed up. The screws made it hold like steal. I give all fit a 20 out of 10 stars!
I went to home depot and got garage door sealer and everything to mount it for $10 and it looks great. good video by the way
+stteller2 Glad that worked for you :) Thanks!!
I run a EZ lip on my Porsche Cayman S. It’s super great. I would buy a nice carbon fiber lip but my car is lowered a lot and I always scrape my lip. If I had a 1k$ lip it would brake alot on me
" improve aerodynamics " hahahahahhahahaha omg i'm dying ! But very nice for the car look
Juan pablo Hurtado it might slightly. Lots of cars have similar air dams from the factory (albeit tested to show actual efficient improvements). Air dams are a proven way to decrease drag and smooth airflow under the car
@@Hole_Motorsports Yeah. Look at the new mid-sized trucks trying to make CAFE standards. They all have big ridiculous air dams.
Just installed the all fit lip today, miles better then the EZlip. Had the EZlip before and it was super soft and scratched/ripped easily. Had to take it off cause it looked so bad.
So glad I came across this bc it’s going on my 8th gen accord coupe too
Awesome video bro. You sold me on the all fit. Thanks!
Very good video man, you did your research, were very clear, didn't waste time getting straight to it. You gained a follower from me!
a star screwdriver?? Really?
LTBOMB 719 clearly it’s a “Plus” screw driver 🤣
Jose Vega you mean Philips
@@gamingonatincan8704 but what size phillips? Lol
awesome video my ez lip just arrived and i happened to come across this video looking for installation instructions glad i seen it im sold dont know what todo with the ezlip now though probably just put it on my lawn mower
+Andrew Navarro Put it on your garage door :)
Should've compared to ez lip pro....more durable then the regular ez lip
You saved me money. Love that shit! I was thinking of ez lip as well but now seeing the difference wont even bother with it. Love you channel!
Thanks man :) Glad this video helped
Great video! Will definitely try this out when the weather gets warmer.
AMAZING. Thank you so much. Thinking of rallying my Hyundai Accent but had no idea what these "lips" were. Glad to know how they work and the quality. I'll be glad to purchase "All Fit" and rep them as well.
Hmmm.... My 2004 Sebring needs a bit of a makeover. Got to fix the clear coat, spruce up the rims, a bit of front end work and deal with just one rust spot. This lip thing would be a nice mod being that the finish is red.
loved your review! informative, entertaining, to the point. Thanks!
Love ur channel bro , i know u changed projects whats ur daily these days?
Great in-depth vid. I'm going to be grabbing the all-fit side skirt kit for my MK7 golf
getting those tight curves are PITA. I redid mine 3 three times, finally got it right
Glad I watched this video CUZ I was about to buy the EZ lip but ordered the all fit instead. Thanks bro
No problem man!! Glad it helped you out
You left the word After up there so long I almost forgot what the before looked like.
I will try to install this product in my european Civic 9th. thanks for the video!
I love both of your channels! I can't stop watching them xD
Glad you like them :) I'll keep em coming if you keep watching ahah
Deal! :)
A well put together video. I've looked at a few, to give me some idea, this is the best. Thank you, for your time.
How easy is this to remove? I know 3m tape can be a pain.. Will it remove any paint if you have to remove it for whatever reason?
If you go ahead and just pull it off, it might. However if you use a heat gun, it will soften up the 3m tape and then removing it will be a lot easier.
Wow. I never thought I’d say this but that actually made the Honda look pretty nice. That’s incredible.
Just ordered my all fit kit for my '14 Lexus IS 350 F Sport.
Ricky Gonzales Glad to hear :) It'll look sweet once its on the car
Ricky Gonzales where do you found it ? link please.
Adrian Flores Astudillo Description box..
milanmastracci hey man my phone won't show the description box. Anyway you can send me the info for the all fit?
Nick Mcginley allfitautomotive.com/all-fit-lip-kit/
I have a 2014 frs and this video helped a lot
EZ-Lip is cheaper though, but All Fit has a larger fitment. He said they were about the same price, but they are not. EZ-Lip is about $20 bucks top and All Fit ranges from $40 - $80 bucks, but that's Ebay prices. I haven't checked other sites, but I deal with eBay regularly.
I've had my ez lip on for at least a year now, with no issues. Plus I did't have to drill holes into my car
You don't HAVE to drill in to your bumper. We just offer an added option for our customers instead of making all customers depending on simply 3M tape. All applications are unique, so we want to make sure all customers can have the correct hardware for a correct installation.
@@all-fitautomotive5754 how much is your product tho.. Compared to others.
Whatan EXCELLENT VIDEO!! i cant decide wich one, until i saw your video, ALL-FIT is much better Quality, thanks you so much!
jahmarko not a problem buddy!!
Helpful video! I'll go for the allfit as it performs better for the reason of installing it, do you have a video on how to remove the lip nice and clean?
Very well done, after having watched your video I wish I hadn't wasted 11. Minutes of my life watching another comparison video. From your after images it looks like you installed it more as a splitter than an air dam. Do you plan on doing the entire car?
Man you did that really well! It looks factory man! Good job!
Thanks dude!
Nice video, now I got one more project to add to my list on my accord.
Glad to hear! I really like how it turned out :)
@milanmastracci its this one of those links that you get paid when people click on it? its this your honest review of both products or or allfitautomotive sponsor You? I'm not affirming anything I'm just asking....
screwing up into the bumper kinda screws up the bumper right...
Anudeep Ananth technically yeah, but whos gonna see it?
Not really it’s underneath no one would see it
Yeah they might not see it but rust in the future might be an issue on bare metal..
@@Butterking99 Then spray some paint over it. I mistakenly drilled holes on my car for the rear mud flaps and I had to paint the holes. No signs of rust so far.
ᑭIKIᑎ yeah I mean on bare metal a lot of people forget to repaint the screws and it causes issues, if you don’t paint it with a proper encapsulating paint that is.
i remember doing this with garage door foam trim and 3m tape on our hondas like 20 years ago... orgins of rice.
Seriously good video man. Thanks for the info
I tried the samurai lip on my 08.its ok I guess.right in the middle where bumper bends up is where the lip didn't setup the same way on either side.its ok I guess.maybe I'm just a perfectionist or something or maybe it really doesn't look good to my liking...I get compliments though.thanks for the vid.
I think the samurai lip maybe just too thin compared to the one you use.
Not that it isn't really better then EZ lip but did they pay you?
I wouldn't mind it if i could get away with doing a full car dip every 2 years but i feel like our winters are just too rough (and I'm too rough) on my car. Im guessing every spring you need to strip her down and cover her back up. I guess in a way thats cool too cuz we can be creative
Thats the beauty of this stuff though! Its durable, removable and affordable. If you prep the car well, it will easily last through the winter. Thats the main reason why I dip my car.
Great Video ! Didn't even know about the ALL FIT. Actually, I am going to wrap it in all white carbon fiber to put on my BRZ..........BAD ASS !!!! Thanks....
***** That will look wicked!! :) I'd love to see how it turns out
milanmastracci Actually, I just heard that EZ LIP has a white color out. Is that true? Thanks Bud !!!
They do have a white lip, but again its made of the same soft material as the other black ez-lip they sell *****
Hey there, just looking at the final product/after section of the video, your car looks like it has a fair few curves on the bumper. You definitely only cut a total of TWO triangles/V's?
Bumper is plastic so can be drilled easily . What about the sides ? Is normal tape adhesive strength sufficient to bear and damage ?
Thanks for this video I was about to buy the ezlip I'm glad I didn't now
I chose the cheap way and made my own with double sided sticky tape and garage door liner. It ripped in 2 weeks and was the biggest bitch to take out. Going to wait till spring to get the all fit lip or the sti lip.
I bought an STI lip for my car but didn't install it because not only did it not fit properly (end to end, it was close but not good enough for me), but it also had to be twisted to fit. The all fit lip can be cut to perfect size
milanmastracci I have a 12' accord coupe so it might fit better idk. Ever thought of installing the HFP kit? If you ever do please make a video!
Yeah sure thing Brandon
milanmastracci Yeah I agree :) thinking about a HFP as well. Also I heard you have to cut pieces of the front and rear bumper but some people say you don't so I would test fit it without cutting it first :O just to be safe
helped greatly ordered mine to put on my 09 accord sedan
Good to hear :) Hope it turns out nice!!
Great video. Clear and concise.
Off topic, Will a muffler delete cause harm to the engine or any CEL?
No not at all. A muffler delete will only give your car some more noise and drone (potentially). It shouldn't harm anything or damage anything as long as you get it installed / install it correctly.
wait when i screw it into the bumper to make it secure... am I screwing holes in my bumper?
disembark you answered your own question buddy
How big is the lip the 1.5 inch or 2.5 inch
next to his fingers it looks 2.5in
No. he has the 1.5in.
Wow! A rare Accord Type-R!
Don’t you do more damage screwing in a screw than a couple of scratches?😂😭
Thank you for the video. Now I have my mind changed and I am going to order the all-fit lip. By the way, is the all-fit lip you putted on a traditional size one or a medium size one?
Cheuk Ming Ng The one installed here is the traditional lip
Thanks :)
Hi! Did you use screws on yours? Also now that it has been a while since you installed it, how is it holding up?
This video is very informative, im getting the 2016 Volkswagon Jetta, and i was wondering which lip would fit best, thanks alot
+Mario Mcpherson what do you need it for? a jetta isn't a sports car..what are you going to bottom it out? you don't need it..waste of money
these double sided tape lips are for ricers and posers
I can only find the ex lip i can't find all-fit lip kit and great video bro
Juan Albornoz The link for it is in the description
Nice, I think I will do just the sides an wrap it with carbon fiber.
You do great videos. Much appreciated regarding item I contemplate buying. I'm scared to try vinyl wrap myself
+hhova29 Thanks!! :) Give it a try, if you don't like how it turned out, take it off lol
solid video! I was going to order the ez off ebay until I ran into this video - you saved from buying inferior product, thanks!
how well has your all fit held up since this video btw?
Hey Can you tell me how to put screws on the under the bumper without scratching it ?? For eg: What positions??
Looks much better, All-Fit Lip really strong. GREAT ALTERNATIVE to a stupidly expensive front lip like '' 06-07 Impreza STI S204 Front Bumper Lip'' ^^
Are there any gloss black versions?
Oh boy a Honda Accord with plastidipped black wheels, red calipers, drilled rotors and now a fake lip
well done and thank you .
At first I thought this was rice but now I think it's nice and might do it to my car
What Optimal Temp is sufficient for the 3M to adhere? I ask this because i live in Alaska..and the Temps about 40-50 right now..so basically Fall Temps, could i still install this with those conditions?
+Christopher Williams The warmer the better. If its cold when you want to mount it, use a hair dryer or a heat gun to get it up to proper temperature. Try keeping it above 70 when you're installing it
I want to install this without drilling holes. I know to use the 3m but will I run into any problems since the end of my bumper where I would attach the lip is has some scratches ?
Ez lip just came in And I was watching videos and came across this. Damn!
Wow,turned out nice
What do you guys think would look better on a corolla 2009-2011 the 1.5 in or 2.5? Trying to get a lip style like his but not sure what size would look better.
do you have to drill holes to the bumper so that the screws with the washers fit?
How heavy it it? It looks very heavy ! I tried this and had to return it because the stupid thing weighed in at 5.5KGS!
I’m goin with the ez lip
whats the warranty on the lip or guarantee? and how did it last through the winter?
Is screwing it in necessary? I'm afraid when I'm driving it would just fall off
+ErockHQ Necessary, not at all. If you want it to be semi-permanent, I would suggest doing it.
ok so on a modern plastic bumper cover I can see this working. So how about if the lip you plan to install it on is on an old school 80s car with a metal lower valance about half inch surface or less???
Joe joe It should still be able to adhere. The 3M double sided tape does a very good job. As long as you prep the area and remove any waxes, you shouldn't have a problem with the installation.
Putting on my Suzuki samurai make it go faster and less top heavy?
Is it possible to paint the All fat lip well, so it wouldn't like fade? 2 coats of primer? Thanks
It looks great on yr Car bro...
I got the Ez-Lip on my car for now.
Thanks man!
How long have you had it on your ride for?
One year now bro..still strong and looking good.
Well thats good that worked out for you!