Thanks so much! Bought a generic toner and figured my printer wasn’t going to allow it. Followed your steps to reconnect network and now I’m back in business. Appreciate it!!
Just bought this printer and can't even connected to Wi-Fi. Such a joke. Why is there not a printer company that has just made connecting to Wi-Fi dead simple? It's 2024???
Thank you so much I finally get it connected after 3 nights of trying after came back from work for hours. Luckily your video jump up and i give it a try..i just unplug for an hour and plug it again and then connect with Wlan then I CONNECTED. !! PHEWWWWW
Was able to connect to the Wi-Fi network manually using the password, however, the computer still won't register the printer as being online again. EDIT: Also had to set to static IP and adjust Subnet mask to 255.255.255.000 and gateway to the corresponding IP. Now it worked. Thanks for your support.
Thanks so much!! Mine was a bit different my Brother printer has a keyboard, and it just says WLAN. Then I also had to hit the wizard set up but then I was able to see my wifi and enter in my pass code and it worked
I have this same printer and it decides when it wants to pickup my tattoo shops signal.its a pain having it not pickup signal when I need to print something
I had to disconnect the power to move the printer across the room. It forgot the wifi details and I had to do the mind numbing rigmarole all over again. Why cant they have an internal memory that survives power down?????/ What a ROYAL PAIN in the BUTT!!!
My printer is connecting to the wifi but not being found in the iPrint & Scan app so I can't use it to scan anything. It allows me to print to it, but not through the app because it just says it's offline.
I have tried everything and unlike all my other hardware, from lights to computers to other electronics, this piece of shit printer doesn’t even connect. It’s 2024 and these printer companies are stuck in the 1990s. The fact they even get away with a single line matrix display and a shit control scheme is laughable.
Thanks so much! Bought a generic toner and figured my printer wasn’t going to allow it. Followed your steps to reconnect network and now I’m back in business. Appreciate it!!
THANK YOU! We got a new internet provider and my printer would not make the switch, but you solved it for me!
Got it thank you
You are just wonderful. I have been trying for 2 days. Finally the green light quit blinking. 🎉
Just bought this printer and can't even connected to Wi-Fi. Such a joke. Why is there not a printer company that has just made connecting to Wi-Fi dead simple? It's 2024???
Biggest piece of JUNK I ever bought! I will NEVER buy another BROTHER product AGAIN! Straight TRASH!
@@MARKLINMAN1 real so trash
My Brother also doesn't connect to WiFi. Are their software engineers stupid or something? Unbelievable.
Thank you bought a new router and wouldn’t connect… worked like a charm
Thank you so so much. I was getting so frustrated!!!!I don't have to go buy another printer. Subscribing!
Worked perfectly! TY!
Thank you! Totally walked me through re-connecting my printer.
Unplug and replug for 5 minutes worked thank you
Thank you so much I finally get it connected after 3 nights of trying after came back from work for hours. Luckily your video jump up and i give it a try..i just unplug for an hour and plug it again and then connect with Wlan then I CONNECTED. !! PHEWWWWW
Thank you. New router wasn’t connecting. Step 3 did the trick. Quick and easy.
Was able to connect to the Wi-Fi network manually using the password, however, the computer still won't register the printer as being online again.
EDIT: Also had to set to static IP and adjust Subnet mask to 255.255.255.000 and gateway to the corresponding IP.
Now it worked. Thanks for your support.
Great information and thank you for sharing. This is very helpful !!!
THANK YOU! LIFE SAVER!
Thank you so much. I had this problem for a long time and couldn't fix it. It solved my problem in a second!
Only one that worked ❤
Brilliant! Solution 2 worked for me. I had no idea it was possible to enter the password using the up and down arrows. Thank you!
Number two worked for me, Thanks 😊
Thank you so much. This was helpful.
Thank you so much, all I had to do is unplug the printer and router for 5 minutes like you said to do
Thank you so much! Solutions 1 and 2 did not help but 3 worked for me!
Thanks so much!! Mine was a bit different my Brother printer has a keyboard, and it just says WLAN. Then I also had to hit the wizard set up but then I was able to see my wifi and enter in my pass code and it worked
Method 1 worked fine for me
Legend!! Thank you
Thank you so much I finally get it connected.i only get WYLAN and no WIFI
I just helped my Dad with this obsolete pile. I can't imagine anyone buys a 2nd brother machine
Thank you X 10!!!
my menu doesn't show all the same options, help!
Thanks 🙏
Thanks it works
Thank You!
Thank-you!!!!!!
I have this same printer and it decides when it wants to pickup my tattoo shops signal.its a pain having it not pickup signal when I need to print something
I had to disconnect the power to move the printer across the room. It forgot the wifi details and I had to do the mind numbing rigmarole all over again. Why cant they have an internal memory that survives power down?????/ What a ROYAL PAIN in the BUTT!!!
My printer is connecting to the wifi but not being found in the iPrint & Scan app so I can't use it to scan anything. It allows me to print to it, but not through the app because it just says it's offline.
Decent ASMR
i don’t see reset printer in the printer menu
i also don’t see wps push button option
Thinks
Nothing you said worked for me. There is no "reset printer" option available.
could they of made this more complicated?! darn modem upgrde threw everthing off.
Great. So basically I have to do a full printer reset every couple days. What an absolute piece of junk.
I have tried everything and unlike all my other hardware, from lights to computers to other electronics, this piece of shit printer doesn’t even connect. It’s 2024 and these printer companies are stuck in the 1990s. The fact they even get away with a single line matrix display and a shit control scheme is laughable.
Thinks