@@RedNeckTrailMix the falcam fits int the peak designs tripod but the sacpure clip does not fit in the falcam. I use the falcam plate with the peak designs travel tripod.
Great video - Thanks! I have a question. I set the MOD3 as Custom (as you did) - to give it a try. Was playing a little bit with it and on the display of the RSC2 sometimes it shows "FORCE FOLLOW" - and the gimbal stops keeping locked direction and swings according to my move... Later I realised it does sometimes the same even in any other mode when front button is pressed. Do you know Why?
I have already learned that using an unstabilized 50mm lense with this on a non ibis body is hard 😂 I want those bokeh shallow depth of field shots but it looks like I'll need to buy a whole new camera body :( I'm going to invest in the sigma 18-55 but I do worry it's gonna be bumpy too lol
Also if anyone knows how to transition easily from a shot in underslung to regular height?! 😂 And if a handle will add greater ability to gentle panning?
For everyone having the abrupt pan issue on the RSC2, a little trick im starting to use to alleviate abrupt pan is setting the the front dial of the gimbal to your pan as well. I do a lot of property videos so its highly necessary for me to have the smoothes pan possible and when walking from room to room the RSC2 fails miserably in the smooth turns, the original SC performs better. When in PF mode, i will shoot my walkthroughs normally but to get rid of that first initial “abrupt turn” i use the front dial to start my turn and allow the gimbal/handgrip movement to follow through. I tried my deadband settings, smoothness, speed, nothing works until i tried this. It still isnt the ultimate greatest, but its definitely a temporary fix until they update the gimbal which needs to be done asap.
I was looking for my first gimbal, then I discovered your channel, bought the rsc2, and then bought 3 qr from ulanzi and now I'm a happy rsc2 user. Will recommend your channel to my filmmakers friends.
I am not sure if 2 is good setting for deadband. It is super sensitive at this low number. Any movement of you hand the gimbal will react either pan or tilt. I think most people want the opposite, less sensitive, therefore larger number. I personally set at 8. I find it is pretty good. But of course if you like follow fast action, you want set a lower number. But I think for most case, people want less sensitive.
I want to give this video way more than just one like! Thank you, Peter! I've been through two Weebill S gimbals but have given up on those due to them both drifting off level, both in pitch and roll, as I move through houses doing my video walkthroughs and so bought the RSC2 but found it terrible in terms of smooth panning as I twist and turn through my complex property walkthrough - the weebill S was fantastic in that regard (but you can't have tilting over houses for your listing videos!). But now, after watching your video here I think I've got what looks like it will be much smoother gimbal behaviour with the RSC2 - for what I do, I like a gradual response to my movements so that when I speed up the footage in post is still looks nice and smooth. I think changing the motor strength is what did it. DJI's documentation is pretty poor and I couldn't work out what were the "smoothness" parameters till now. I can now look forward to having vertical verticals AND smooth pans!
Yes mate. I have shoot many real estate videos with the weebill s as well. It is good but the dji RSC2 is in my oppinion more stable, and when you adjust the settings you will get the smoothness you are looking for.
Thanks for your comment. I did real estate shots yesterday and they came out terrible (steps were way to visible in the fastened up footage and post stabilization couldn't help). I will try follow the settings mentioned in the video and see if it gets better.
Wow bro Peter indeed you’ve really opened my eyes.. I’m a big inter but I think with this great tutorials I’m gonna really shoot dhope videos I’m wisdom from Ghana Peter
Hi Peter, In the section Advanced -> Strength, do we need to change the value to 8,4,4 every time we auto tune the gimbal or it is saved once forever? And this needs to be done in M1, M2 and M3 or it gets applied to all three modes by default?
awesome, my footage looks like the sample footage from other people finally. i got my rsc 2 and while impressed kinda had that wtf in the back of my mind with the sorta stiff jerky motions of it while tracking etc and this really smoothed it out.
I've followed all your instructions and it works great now, only thing I have problem with is from any of the custom modes if I go to the 360 roll, the joystick is too slow to make a rotation. Do you have idea how can I make the joystick be fast but only when in 360 roll mode? Thx.
how do these settings take effect? do you have to balance on the app to activate them? and, when you put on the handle or extra monitor Peter, do you have to balance the gimbal like you would in your balancing video?? thanks for your awesome vids man. learning a lot!!
This was great - I have 2 questions I got your extra arm - and it's a game changer - but it doesn't stay tightened down I have to constantly retighten it. Also - for some reason - my stiffness resets everytime I shut the gimbal off and turn it back on? Did you see the same?
Nice helpfull video! What do you think about the SuperSmooth setting. Leave it on or off? What are the disadvantages? DJI does not really explain much about it.
I leave it off. It will only be good to use of you are running etc. But you will have to use the lens support and strap to secure the camera to the gimbal.
If using Sony A7iii and Tamron 17-28 .. wat settings u suggest.. and with Sony 35 1.8 .. 85 1.8.. Is it remains same with these three lenses.. can u check pls.. wat I need too change..
Great vid. The settings I put in that you suggested for the motor parameters instantly change as as you navigate away from the tab, when you come back to the tab they are different, how do you save the settings?
Hello Peter, thank you for the great information. Can I know which camera you use for this video and any other basic information to getting a cleaner video shots. Thanks I’m advance.
I didn’t realize how extremely sensitive the joystick is. I tried using it yesterday and had to do 20 takes of certain b roll I was doing. It’s hard to get it just right while trying to walk backwards. If you want to go down right it should be easy to do. For me I have to barely touch it otherwise it’ll continue moving in the same direction. Any recommendations on how it could be fixed?
@@PeterMakholm yes, I did that! It’s better, but when I want to move with it it seems to still be a challenge to get it going in a smooth direction that I want. I’m sure it’s just a practice thing! Maybe in a future firmware update they can offer an additional sensitivity adjustment. It’s still worth every penny!
I've been having issues with my RS2 and z6ii. When I have my VR turned on in camera, i get very jerky footage. Now I just shoot with no in camera VR when I have it on my gimbal. Anyone else have this issue?
@@Paulpanly I just shot with the z6 ii 20mm on the RS2 and had ibis turned on and it def seemed jerky. next time I shoot im going to turn it off and see how much better it is..Just recently picked up the gimbal so kind of new to this.
I have the same setup and i applied all setting but i still can not get smooth results like the videos i see on RUclips. One of my friends said that all the videos about ronin or zhiyun are not real and everybody is using warp stabilizer. What is your opinion about that subject?
Great video - Thanks! I have a question. I set the MOD3 as Custom (as you did) - to give it a try. Was playing a little bit with it and on the display of the RSC2 sometimes it shows "FORCE FOLLOW" - and the gimbal stops keeping locked direction and swings according to my move... Later I realised it does sometimes the same even in any other mode when front button is pressed. Do you know Why?
It would be nice to see you doing this same exact setting steps on the RS2. There is a few things that doesn't respond the same, specially the "PUSH MODE" on the RS2 that feature is impossible to make it work.
Love your video, but I purchased your PDF guide for gimbal settings and they are not the same as what is included in this video. What's the reason behind that?
Hey dude, great video. I have this rigged with an a7c + Tamron 17-28mm and a Smallrig cage weighing in at 2.3lbs compared to your 3.6lb setup. Would you recommend drastic changes in the follow speed/deadband settings? Or were you speaking more about the motion control settings? Thanks in advance!
Nice video dude, I learned a lot from your videos🙂 I set the same setting on your video on my DJI RSC2 with my A7c and sigma 24-70mm however, there is some jitters when using it even though it is properly balance. I hope you can help me. Thanks a lot.
Hey Peter in the Control Menu for the Motion settings, do you have 100, 34, and 23 across the board for the Pan, Tilt, and Roll? I know you said in the video it's the same settings in all 3 modes but is it the same for all 3 axis as well? Thank you great video!
i tried putting the c to c cord from the rsc2 into my gh5 and it just says connecting to PC with a jagged arrow - it doesn't leave the screen and it doesn't let me record. any ideas? thank you so much
Hi rebecca, Yes it is a simple fix. go in to you menu on the gh5. under the wrench settings find usb connection and change form PC(storage) to PC(Tether) then it will work.
On the PF mode your roll Locked but still you give number if am wrong correct me I thought the roll should be at 0 because it’s PF no need till and roll
Hi peter.. you are doing good job. But peter my weebill s cannot saved motor settings after auto tuning. Everytime i turned on my gimbal shakes. Its also in low mode. Everytime when i turned on i have to go in custom and decrease tilt number everytime. can you please help me out. I want to get rid of everytime changed tilt motor setting!
On the weebil s, If i touch the camera while the gimbal is on, it doesnt bob or sway at all where as the rsc 2 will give way to any pressure, is there a way to make this a lot tigher/stronger like the weebil s?
Hi Peter, I've tried your setup on my Ronin RS2, on top I have a Sony a6000 with 18/55mm lens. If I'm using your setup I can feel that all the motor are engaged also when I'm not moving the gimbal, plus if I tilt it I'm having a lot of vibration. What I did wrong? Thx if you can help.
I would have a few questions for you if you would be kind enough to answer me 'I have adjusted all these settings, namely when I move towards an object and make a step of 5 m let's say the gimbal does not go smoothly, notice that stabilization when walking does not work well, and at the same time I balanced everything super, what do you suggest for that option? And another question with option 3, the joystick is very fast for you, why did you leave it to be so fast, ie for what purpose? And I realized that you use option 3 when you raise the gimbal up high and lower it very low to stay in the direction, right? and 1 more question with raven eye when I check an object or a person it works well for a few seconds, so when I move away then it returns the camera to the center but somehow quickly and it doesn't really bother me in the shot, how to adjust the best settings? I wrote to the company and they gave me the parameters with which lens to adjust the tracking speed. In which situations do you use preset m1 and preset m2 for M3, it is clear to me, it's just that the joystick moves quickly, ie that you left it to be sensitive? Thanks in advance. I consider you a great expert, so that's why I asked you. Thanks
Just received my gimbal yesterday and was researching theses settings. Thanks. I was using a MOZA 3 axis gimbal and so far the new gimbal feels awkward when I try to recreate my go to slider moves and crane moves. Anyone have this issue?
@@PeterMakholm I will do that, One thing i missed the first time i watched your video was using the custom mode to better match my style of shooting. Thanks for the lesson
@@jjgonza100 I also came from Moza Air and using this Rsc2 has been a kind of pain in the ass. All the moves are so much robotic and glitchy. With Moza I could just throw my camera on, balance it and the footage was smooth. This has all the bells and whistles, but I think the stabilization of my footage got downgraded.
@@hansbagel7563 I have not had a lot of time to test but so far the gimbal seems smooth. One thing i did is go into the M1,M2 and M3 settings and manually set the moves to match my Moza which i like because it is so much more familiar. I am still using my MOZA until i can fully test the RSC2. Hopefully this week i can create some sample footage. I think i understand what you are saying by robotic, i think the design and shape of the gimbal arms makes it feel a bit awkward. I think this is a byproduct of positioning the the arms so they do not block the view of the screen. IMO
I have z50 camera lens 28mm 2.8 50mm 1.8 and 16 50mm kit gimble Rsc2. I have a problem that when i puss forward and backward with gimble and this kind of small setup footage have a up and downe movement. Me and my friends have same provlem. Small camera like sony 6400 also have this kind off a provlem. Footstape is show in the footage. How can i solve this problem? Plz help
Anyone has tips on how to get roll lock-like movements with the Weebil S? Whenever I have it in POV mode and I tilt up to get a revealing shot while walking, my horizon line is almost always off, I monitor the horizon from my GH5 screen. This might just come to a lot of practice to get that horizon on point but I wanted to know if there's any other way to nail it every time. I only seem to nail it when I'm not walking
@@ilyasguner2267 too big and heavy, the app was wonky and didn't work, and it was glitchy with my camera (Lumix GH5) bought a DJI Ronin RSC 2 and it's just simply better in performance, app and reliability with my camera. I had 3 different Zhiyun gimbals and all were not at solid and stable as the DJI platform.
I am puzzled . So i set up everything as you say - but when i start using my RS2 in Pan-Follow mode, it turns its own way and I have very little control over it... Any advice ? Thanks !
I was going through the same exact problem. It seems to be a problem with the RS2. I'm also wondering why he only choose to do this with RSC2? On mine not even the "PUSH MODE" works, no matter what I do it doesn't work. I was able to actually keep it lock ( sort off) by disable "ACTIVE TRACK" which for me is a bit odd.
Yes. i would apply the settings and se how the gimbal behaves. As long as you auto-tune the gimbal first and won't change the motor stiffness settings.
@@PeterMakholm i changed it too it, it feels really slow but thats the point right?? For actions shots just double tap m and hold trigger for enable sportsmode
The trick is to move the tilt arm a bit up and adjust the base plate for perfect balance. you can see how I do it in this video: ruclips.net/video/OroRrr5NCM4/видео.htmlsi=t5LFAOU630H0UJuu
![BEST RONIN GIMBAL SETTINGS FOR SMOOTH FOOTAGE! [DJI RS3 PRO, RS3 & RS2 ]](/img/1.gif)
DJI RSC 2 Accessories | The Best Gimbal Accessories For Video Creators ruclips.net/video/VTRhj9Hh6G4/видео.html
Hey Peter will the peak designs clip fit with the small rig plate for rsc2 I have the pd travel tripod and prefer to keep one plate on my camera
SUBSCRIBED!!
@@RedNeckTrailMix the falcam fits int the peak designs tripod but the sacpure clip does not fit in the falcam. I use the falcam plate with the peak designs travel tripod.
@@PeterMakholm ok so the small rig plate and the falcam clip is what I need for the gimbal and tripod thanks.
Great video - Thanks! I have a question. I set the MOD3 as Custom (as you did) - to give it a try. Was playing a little bit with it and on the display of the RSC2 sometimes it shows "FORCE FOLLOW" - and the gimbal stops keeping locked direction and swings according to my move... Later I realised it does sometimes the same even in any other mode when front button is pressed. Do you know Why?
i got this gimbal and i have no effing idea what im doing :D
You will learn mate.
Yes:!I am not the only one! :D
But I think we have no other way than using it again and again! Let's see..
I have already learned that using an unstabilized 50mm lense with this on a non ibis body is hard 😂 I want those bokeh shallow depth of field shots but it looks like I'll need to buy a whole new camera body :( I'm going to invest in the sigma 18-55 but I do worry it's gonna be bumpy too lol
Also if anyone knows how to transition easily from a shot in underslung to regular height?! 😂 And if a handle will add greater ability to gentle panning?
@@Franciehatescoffeeicecream hi. You should consider buying this back handle from ulanzi. geni.us/RxsI it makes it way easier to make that transition
For everyone having the abrupt pan issue on the RSC2, a little trick im starting to use to alleviate abrupt pan is setting the the front dial of the gimbal to your pan as well. I do a lot of property videos so its highly necessary for me to have the smoothes pan possible and when walking from room to room the RSC2 fails miserably in the smooth turns, the original SC performs better. When in PF mode, i will shoot my walkthroughs normally but to get rid of that first initial “abrupt turn” i use the front dial to start my turn and allow the gimbal/handgrip movement to follow through. I tried my deadband settings, smoothness, speed, nothing works until i tried this. It still isnt the ultimate greatest, but its definitely a temporary fix until they update the gimbal which needs to be done asap.
That is exactly what I'm doing😂 thank you anyway
Hi! How do you set the front dial to pan?
I was looking for my first gimbal, then I discovered your channel, bought the rsc2, and then bought 3 qr from ulanzi and now I'm a happy rsc2 user. Will recommend your channel to my filmmakers friends.
Thanks mate great to hear that you find my content usefull.
Thanks for the no nonsense direction on these videos. I have raised our production value by having the correct settings.
Smooth just got smoother. Nice
Just tested a little bit, works much better, now i can use rsc2 without annoying movements. Thanks a lot!
I am not sure if 2 is good setting for deadband. It is super sensitive at this low number. Any movement of you hand the gimbal will react either pan or tilt. I think most people want the opposite, less sensitive, therefore larger number. I personally set at 8. I find it is pretty good. But of course if you like follow fast action, you want set a lower number. But I think for most case, people want less sensitive.
you're an absolute hero thank you
I want to give this video way more than just one like! Thank you, Peter!
I've been through two Weebill S gimbals but have given up on those due to them both drifting off level, both in pitch and roll, as I move through houses doing my video walkthroughs and so bought the RSC2 but found it terrible in terms of smooth panning as I twist and turn through my complex property walkthrough - the weebill S was fantastic in that regard (but you can't have tilting over houses for your listing videos!).
But now, after watching your video here I think I've got what looks like it will be much smoother gimbal behaviour with the RSC2 - for what I do, I like a gradual response to my movements so that when I speed up the footage in post is still looks nice and smooth. I think changing the motor strength is what did it. DJI's documentation is pretty poor and I couldn't work out what were the "smoothness" parameters till now.
I can now look forward to having vertical verticals AND smooth pans!
Yes mate. I have shoot many real estate videos with the weebill s as well. It is good but the dji RSC2 is in my oppinion more stable, and when you adjust the settings you will get the smoothness you are looking for.
Thanks for your comment. I did real estate shots yesterday and they came out terrible (steps were way to visible in the fastened up footage and post stabilization couldn't help). I will try follow the settings mentioned in the video and see if it gets better.
how was the settings mate ? !@@KEVISONFIRE83
Thanks so much Peter, such an informative and handy breakdown of how to set up a gimbal. I really appreciate the help!!
Fantastic help, I didn't even notice the side dial, the manual doesn't really mention it. I appreciate this so much!
Wow bro Peter indeed you’ve really opened my eyes.. I’m a big inter but I think with this great tutorials I’m gonna really shoot dhope videos I’m wisdom from Ghana Peter
I shoot a D500. Definitely had to increase the pan strength in all the settings. But definitely much much smoother! Thank you for this!
Your settings rock!!!! Helped me a bunch last night
I'm going to try it out now. See if it's better than the stock settings.
Hi Peter,
In the section Advanced -> Strength, do we need to change the value to 8,4,4 every time we auto tune the gimbal or it is saved once forever? And this needs to be done in M1, M2 and M3 or it gets applied to all three modes by default?
bro, thanks really you always help me a lot, first with de weebill and now with dji rsc2 thaaaaaaaaaaaaaaanks
Thanks a lot Peter. Great job,
Excellent tutorial! Very informative. Thank You!
Thank you ❤
Thank you very much, Peter. A very good tutorial, thumbs up. I immediately bought your setup PDF document. Please keep up the good work.
Thanks mate.
awesome, my footage looks like the sample footage from other people finally. i got my rsc 2 and while impressed kinda had that wtf in the back of my mind with the sorta stiff jerky motions of it while tracking etc and this really smoothed it out.
Awesome, I love to your setting on the Rs2 for different focal lengths
big thanks peter!
You are welcome mate.
Can’t wait for future videos on this gimbal....bad ass video and thank you
Thanks for the support Joe.
Gold bro 👌
Gorgeous piece of tech.
Thanks for this video. love your vids.
Thank you mate. always appreciated.
Life changer - thank you !
Thank you
Most simple and useful tutorial
Thanks.
this was just what I needed
Great to hear.
I've followed all your instructions and it works great now, only thing I have problem with is from any of the custom modes if I go to the 360 roll, the joystick is too slow to make a rotation. Do you have idea how can I make the joystick be fast but only when in 360 roll mode? Thx.
Manually increase speed via gimball
thank you
Thank you very much, Peter Makholm. One question, is this settings also good for DJI RONIN S?
So good 👍👍👍
Under Motion, are your settings 100-34-23 for Tilt and Roll as well as Pan?
Very helpful video my guy, thanks for taking the time to upload!
2:54 settings … thanks
Great video. Thanks Peter
Make more videos on rsc2
Love this. New subscriber. Great creative and understandable content!
Thanks Michael.
thank you very much peter is very useful the information you give us well done keep up the good work !!!
Just brought one. So this will be fun
Love your video and your content man, thanks for helping us out on our journeys, appreciate the effort from your end!
how do these settings take effect? do you have to balance on the app to activate them? and, when you put on the handle or extra monitor Peter, do you have to balance the gimbal like you would in your balancing video?? thanks for your awesome vids man. learning a lot!!
Thnku so much
This was great - I have 2 questions I got your extra arm - and it's a game changer - but it doesn't stay tightened down I have to constantly retighten it. Also - for some reason - my stiffness resets everytime I shut the gimbal off and turn it back on? Did you see the same?
Nice helpfull video! What do you think about the SuperSmooth setting. Leave it on or off? What are the disadvantages? DJI does not really explain much about it.
I leave it off. It will only be good to use of you are running etc. But you will have to use the lens support and strap to secure the camera to the gimbal.
Thanks, great video.
6:14 did you set all control parameters the same for Pan and Tilt too?
Thank you for the video and PDF download. What setting would you recommend for someone who wants to do a vlog where the lens is on me? Thanks again!
If using Sony A7iii and Tamron 17-28 .. wat settings u suggest.. and with Sony 35 1.8 .. 85 1.8..
Is it remains same with these three lenses.. can u check pls.. wat I need too change..
Very helpful
Great vid. The settings I put in that you suggested for the motor parameters instantly change as as you navigate away from the tab, when you come back to the tab they are different, how do you save the settings?
I have a question - when balancing the axis do you lock all other axiss?
Hi, Yes I do, it is much easier to deal with when you only have one axis to deal with at the time.
@@PeterMakholm great thanks!
Hello Peter, thank you for the great information. Can I know which camera you use for this video and any other basic information to getting a cleaner video shots. Thanks I’m advance.
Great sir
I didn’t realize how extremely sensitive the joystick is. I tried using it yesterday and had to do 20 takes of certain b roll I was doing. It’s hard to get it just right while trying to walk backwards. If you want to go down right it should be easy to do. For me I have to barely touch it otherwise it’ll continue moving in the same direction. Any recommendations on how it could be fixed?
Yes it is super sensitive. but in the settings under controls you can lower the speed and sensitivity.
@@PeterMakholm yes, I did that! It’s better, but when I want to move with it it seems to still be a challenge to get it going in a smooth direction that I want. I’m sure it’s just a practice thing! Maybe in a future firmware update they can offer an additional sensitivity adjustment. It’s still worth every penny!
does these setting apply in vertical mode
Thank you for sharing! What's your setting for high action shooting?
I turn up the motor strength up to 20 on all motors. and then i increse the follow speed to 70 on all motors.
@@PeterMakholm got it thanks!
Do we need to turn off the camera's stability function (vibration reduction) when using a gimbal? Thank you in advance.
I've been having issues with my RS2 and z6ii. When I have my VR turned on in camera, i get very jerky footage. Now I just shoot with no in camera VR when I have it on my gimbal. Anyone else have this issue?
@@Paulpanly I just shot with the z6 ii 20mm on the RS2 and had ibis turned on and it def seemed jerky. next time I shoot im going to turn it off and see how much better it is..Just recently picked up the gimbal so kind of new to this.
@@b3lievenhopephotography578 I turned off the VR and it was a lot better!
@@Paulpanly Yup I did too and def alot better!
Hi Peter, Thanks for this great setting, but I still have shake in my movie. Did you deactivate steady cam on the gimbal ??
I have the same setup and i applied all setting but i still can not get smooth results like the videos i see on RUclips. One of my friends said that all the videos about ronin or zhiyun are not real and everybody is using warp stabilizer. What is your opinion about that subject?
Ight bet
Great video - Thanks! I have a question. I set the MOD3 as Custom (as you did) - to give it a try. Was playing a little bit with it and on the display of the RSC2 sometimes it shows "FORCE FOLLOW" - and the gimbal stops keeping locked direction and swings according to my move... Later I realised it does sometimes the same even in any other mode when front button is pressed. Do you know Why?
Sorry mate, but that I haven't seen before.
رائع .. شكرا لك
It would be nice to see you doing this same exact setting steps on the RS2. There is a few things that doesn't respond the same, specially the "PUSH MODE" on the RS2 that feature is impossible to make it work.
Love your video, but I purchased your PDF guide for gimbal settings and they are not the same as what is included in this video. What's the reason behind that?
Hey dude, great video. I have this rigged with an a7c + Tamron 17-28mm and a Smallrig cage weighing in at 2.3lbs compared to your 3.6lb setup. Would you recommend drastic changes in the follow speed/deadband settings? Or were you speaking more about the motion control settings? Thanks in advance!
Can this settings work for the rs4 pro ?
After balancing do you lock all the pivots because my camera just moves like crazy after I do the auto stabilizer?
Nice video dude, I learned a lot from your videos🙂 I set the same setting on your video on my DJI RSC2 with my A7c and sigma 24-70mm however, there is some jitters when using it even though it is properly balance. I hope you can help me. Thanks a lot.
Did u fix it
Heyy did u fix it again lol
@@ilyasguner2267 Yes I did. Update your DJI RSC2.
@@redballoonproductions8970 what changed after update and are u using latest firmware right now?
...use the Lens support bracket that is supplied(bigger lenses)
Do you use Super smooth mode? I can't see a big difference with it on or off.
Hey Peter in the Control Menu for the Motion settings, do you have 100, 34, and 23 across the board for the Pan, Tilt, and Roll? I know you said in the video it's the same settings in all 3 modes but is it the same for all 3 axis as well? Thank you great video!
what did you do finally? since i don't find this answer anywhere haha
i tried putting the c to c cord from the rsc2 into my gh5 and it just says connecting to PC with a jagged arrow - it doesn't leave the screen and it doesn't let me record. any ideas? thank you so much
Hi rebecca, Yes it is a simple fix. go in to you menu on the gh5. under the wrench settings find usb connection and change form PC(storage) to PC(Tether) then it will work.
@@PeterMakholm thank you so much Peter
Will this connect with Sony a7s3? I know there is issues with a7s3 comuncation with other gimbals and iso etc
As far as I know it should.
It works without any problem! Also RavenEye works like charm!
I use it with a 14mm but in the lock mode the it still pans side to side it walking or making any minor moves.
On the PF mode your roll Locked but still you give number if am wrong correct me I thought the roll should be at 0 because it’s PF no need till and roll
Hi peter.. you are doing good job. But peter my weebill s cannot saved motor settings after auto tuning. Everytime i turned on my gimbal shakes. Its also in low mode. Everytime when i turned on i have to go in custom and decrease tilt number everytime. can you please help me out. I want to get rid of everytime changed tilt motor setting!
I would six side calibrate the gimbal and downgrade to 1.96. And then try to auto tune it again.
Thank you so much peter for your reply🙏🏻
On the weebil s, If i touch the camera while the gimbal is on, it doesnt bob or sway at all where as the rsc 2 will give way to any pressure, is there a way to make this a lot tigher/stronger like the weebil s?
How do you use roll feature since none of the 3 modes configured have roll enabled.
If I need roll of fpv mode enabled I select in the menu.
@@PeterMakholm thanks 👍
Hi Peter, I've tried your setup on my Ronin RS2, on top I have a Sony a6000 with 18/55mm lens. If I'm using your setup I can feel that all the motor are engaged also when I'm not moving the gimbal, plus if I tilt it I'm having a lot of vibration. What I did wrong? Thx if you can help.
Seems set up give vibration in pan deadband ... Where to load pdf with explain of the 3 mode ?
What lens are you rocking on the S1H ? Same setup, I have a Canon 20mm FD on at the minute.
On the gimbal I have the Lumix 16-35mm
@@PeterMakholm Are you using AF? It's the one thing I miss from my A7III gimbal setup.
I would have a few questions for you if you would be kind enough to answer me 'I have adjusted all these settings, namely when I move towards an object and make a step of 5 m let's say the gimbal does not go smoothly, notice that stabilization when walking does not work well, and at the same time I balanced everything super, what do you suggest for that option? And another question with option 3, the joystick is very fast for you, why did you leave it to be so fast, ie for what purpose? And I realized that you use option 3 when you raise the gimbal up high and lower it very low to stay in the direction, right? and 1 more question with raven eye when I check an object or a person it works well for a few seconds, so when I move away then it returns the camera to the center but somehow quickly and it doesn't really bother me in the shot, how to adjust the best settings? I wrote to the company and they gave me the parameters with which lens to adjust the tracking speed. In which situations do you use preset m1 and preset m2 for M3, it is clear to me, it's just that the joystick moves quickly, ie that you left it to be sensitive? Thanks in advance. I consider you a great expert, so that's why I asked you. Thanks
Just received my gimbal yesterday and was researching theses settings. Thanks. I was using a MOZA 3 axis gimbal and so far the new gimbal feels awkward when I try to recreate my go to slider moves and crane moves. Anyone have this issue?
Try to apply my settings then it shoud feel more smooth.
@@PeterMakholm I will do that, One thing i missed the first time i watched your video was using the custom mode to better match my style of shooting. Thanks for the lesson
@@jjgonza100 I also came from Moza Air and using this Rsc2 has been a kind of pain in the ass. All the moves are so much robotic and glitchy. With Moza I could just throw my camera on, balance it and the footage was smooth. This has all the bells and whistles, but I think the stabilization of my footage got downgraded.
@@hansbagel7563 I have not had a lot of time to test but so far the gimbal seems smooth. One thing i did is go into the M1,M2 and M3 settings and manually set the moves to match my Moza which i like because it is so much more familiar. I am still using my MOZA until i can fully test the RSC2. Hopefully this week i can create some sample footage. I think i understand what you are saying by robotic, i think the design and shape of the gimbal arms makes it feel a bit awkward. I think this is a byproduct of positioning the the arms so they do not block the view of the screen. IMO
I have z50 camera lens 28mm 2.8 50mm 1.8 and 16 50mm kit gimble Rsc2. I have a problem that when i puss forward and backward with gimble and this kind of small setup footage have a up and downe movement. Me and my friends have same provlem. Small camera like sony 6400 also have this kind off a provlem. Footstape is show in the footage. How can i solve this problem? Plz help
Any idea why my raven eye dont show up in my phone wifi. It just showed up once and after that it just didn't show up
Anyone has tips on how to get roll lock-like movements with the Weebil S? Whenever I have it in POV mode and I tilt up to get a revealing shot while walking, my horizon line is almost always off, I monitor the horizon from my GH5 screen. This might just come to a lot of practice to get that horizon on point but I wanted to know if there's any other way to nail it every time. I only seem to nail it when I'm not walking
You should be able to that move in PTF. Push forward and tilt the camera up or down.
@@PeterMakholm Which mode is that?
Follow mode?
@@tebogopodile It is Pan Tilt Follow. on the RSC2 it will be on M2 if you haven't changed it
@@PeterMakholm Oh right that's on the RSC2, I meant on the Weebill S
Awesome video, thank you! Do you know if it is possible to use electronic focus with the sony a7iii? and if so, how to do that?
Sorry. I don’t know if it is possible. But you will always get the best focus adjustments by using the follow focus.
@@PeterMakholm ok thank you. yes that is true
You can hold the mode button down and press the trigger twice to toggle lock mode without having to hold the trigger.
thats exactly SPORT mode! :D - and not lock mode
that will enter sport mode not lock mode.
Thank you for this informative tutorial. Is there a sports mode on the RSC 2 like Zhiyun has?
yeah there is
Push m button
@@ilyasguner2267 sold it about 9 months ago.
@@BrianTheChristopher why
@@ilyasguner2267 too big and heavy, the app was wonky and didn't work, and it was glitchy with my camera (Lumix GH5) bought a DJI Ronin RSC 2 and it's just simply better in performance, app and reliability with my camera. I had 3 different Zhiyun gimbals and all were not at solid and stable as the DJI platform.
I am puzzled . So i set up everything as you say - but when i start using my RS2 in Pan-Follow mode, it turns its own way and I have very little control over it... Any advice ? Thanks !
I was going through the same exact problem. It seems to be a problem with the RS2. I'm also wondering why he only choose to do this with RSC2? On mine not even the "PUSH MODE" works, no matter what I do it doesn't work. I was able to actually keep it lock ( sort off) by disable "ACTIVE TRACK" which for me is a bit odd.
Hey dude, is this different for every single camera? If i use a a7iii, battery grip with a heavy lens would these settings even be a good idea
Yes. i would apply the settings and se how the gimbal behaves. As long as you auto-tune the gimbal first and won't change the motor stiffness settings.
@@PeterMakholm i changed it too it, it feels really slow but thats the point right?? For actions shots just double tap m and hold trigger for enable sportsmode
Hola Peter, cual es ultimo firmware del DJI RSC2
Do you have supersmooth turned on or off?
For Zhiyun crane 2s
pls setting in ronin-s
My dji ron rsc 2 roll axis cannot balance. It always back to centre. Sir, how to fix it?
The trick is to move the tilt arm a bit up and adjust the base plate for perfect balance. you can see how I do it in this video: ruclips.net/video/OroRrr5NCM4/видео.htmlsi=t5LFAOU630H0UJuu