I can stare at most RUclips videos, waiting for someone to get to the point. I'll need to watch this several times, with a notepad, just to absorb it all. I would dissolve into maniacal laughter here, but I might miss some of the video. Love you guys.
Amazing! I loooove my Morphagene, Mimeo, Qpas...and just.. Make Noise is the best! Thanks again for sharing your wizardly knowledge, patch suggestions. 🥳
Question here. I picked up a morphagene, Is it possible to do something about the noise floor? When everything is silence the morphagene created some soft buzzing digital noise. this happens even without input.
Exstatik! Can you please clarify -- as if for newbee -- the routing going on to/from the Mult? I go back and forth among the most recent vids and see things happening that do not seem to conform with the basic in/out architecture. Or... maybe I'm just deluded. (I watched the Mult spotlight vid using the Shared System way back when; but that is straight ahead with an explicit bridge between the first and second channels. Thanks. You continue to amaze and inspire!
Sure thing! The Mimeophon's Left and Right outputs are each multed to the respective Morphagene inputs, as well as to the Left and Right inputs on the XPO. This means that what we are hearing is the outputs of the Mimeophon, but that at the same time those outputs are feeding the Morphagene for the easy recording of these variations: Mimeophon L Out -> Mult Ch1 Mult Ch1 -> Morphagene L In Mult Ch1 -> XOH L In Mimeophon R Out -> Mult Ch2 Mult Ch2 -> Morphagene R In Mult Ch2 -> XOH R In
it will eventually drift out of phase, but probably take a long time to do so. if you change gene size or varispeed then it'll go out of phase immediately of course. if you're not modulating those things at all then may as well just keep it patched :)
0:13 'recent fun' can someone link me to the previous video where Walker uses EoSC x 16 to sync rene with a breakbeat? thanks. I've searched, believe me.
the video it's referring to is this one, although i'm not sure it includes the technique you mention :P ruclips.net/video/7SkG0-a_wMI/видео.htmlsi=PQ-3lKAFeY4QAn9V
How do you make a splice like the first one that perfectly loops? I remember there being some software you need to download to place precise splice markers on an audio clip, but I think it wasn't free?
It can be done on the Morphagene itself with the Splice button. With a one-splice Reel like this you don’t need to place Splice points in software, but our preference for placing Splice points is Reaper, which is free to try with no time limit (and very reasonably priced when you are ready for it!)
@@MAKEN0ISEMUSIC thanks for the reply! I guess what I actually meant was, if you're recording directly into the morphagene and manually pressing the rec button how would you get a perfectly looped splice (without having impeccable timing?) In other words, is it possible to "trim" a splice without using a computer to get it to loop perfectly? I guess it's probably easiest to just load the sample by dropping it onto the sd card instead of trying to record from the inputs. Maybe there's a way to do it only on the morphagene by making the gene size super small and scrubbing through to the end of the loop and hitting "splice", then deleting the new splice? Hmmmmm
@@colinwood9717 What I do might be similar to what you are saying, I record a little extra at the beginning and end, then use Gene Size and Slide to "Zoom in" so I hit the transients at the loop points exactly. I hit Splice at these points and then remove the Splices before and after to "crop" it.
That's kinda the point. Maybe I love garbage & eat all my meals out of the trash. Maybe I buy from a manufacturer named 'Make Noise' because i want to... make noise. But maybe 'music' is very subjective and the sounds in this video sound beautiful to some (or a lot) of us
I can stare at most RUclips videos, waiting for someone to get to the point. I'll need to watch this several times, with a notepad, just to absorb it all. I would dissolve into maniacal laughter here, but I might miss some of the video. Love you guys.
Glad to hear you enjoyed it!!
This is why makenoise is one of the most creative designer of music devices.
🎶⚡️🎶
So badass, thanks Walker for taking it "too far."
Guacamolly - what a delight! Impressive performance. Cheers to all involved, that put a huge smile on my face.
⚡️🎶
Wow, mindblowing..going to have to watch this video a few times lol
Have fun!!
@@MAKEN0ISEMUSIC always, thanks to you
Every single video you guys post is a joyous journey! Thank you!
Thanks for watching!! ⚡️🎶
inop 1 is super cool! i wasn't aware of that prior to this video, thanks :)
and omod 1 is such a great option to have, too. 🍓
Thank you for the great videos, that inspires and always gives new incentives to try out something new.
Happy patching!!
@@MAKEN0ISEMUSIC sure:-) anytime
keep comin back to this one...
Amazing! I loooove my Morphagene, Mimeo, Qpas...and just.. Make Noise is the best! Thanks again for sharing your wizardly knowledge, patch suggestions. 🥳
⚡️🎶⚡️
What a rave! Morphogene still king. Last few minutes are absolutely mind-blowing. I'd love a full live set with this idea only.
That sounds like fun! Live mishmashing
This is insanely cool. Very impressive performance! 👏
Thanks! Glad you enjoyed 🎶⚡️
Thanks for more very useful ideas.
Thanks for watching! Glad you enjoyed 🎶⚡️
Killer stuff in here
Thanks Joey!!
Question here. I picked up a morphagene, Is it possible to do something about the noise floor?
When everything is silence the morphagene created some soft buzzing digital noise. this happens even without input.
Oh my
Walker: When you get excited, I get excited. Thanks.
You and me both! (That was one of RUclips’s suggested responses and it sounded especially appropriate/redundant 🎶⚡️🎶)
That was a hoot!
🦉 ⚡️
Incredible! I just wish I could get my hands on one 😢 They’re as rare as rocking horse shit in t’ UK!
Exstatik! Can you please clarify -- as if for newbee -- the routing going on to/from the Mult? I go back and forth among the most recent vids and see things happening that do not seem to conform with the basic in/out architecture. Or... maybe I'm just deluded. (I watched the Mult spotlight vid using the Shared System way back when; but that is straight ahead with an explicit bridge between the first and second channels. Thanks. You continue to amaze and inspire!
Sure thing! The Mimeophon's Left and Right outputs are each multed to the respective Morphagene inputs, as well as to the Left and Right inputs on the XPO. This means that what we are hearing is the outputs of the Mimeophon, but that at the same time those outputs are feeding the Morphagene for the easy recording of these variations:
Mimeophon L Out -> Mult Ch1
Mult Ch1 -> Morphagene L In
Mult Ch1 -> XOH L In
Mimeophon R Out -> Mult Ch2
Mult Ch2 -> Morphagene R In
Mult Ch2 -> XOH R In
Seriously Cool!!!
⚡️🎶😛
This is very cool. I'm wondering how long does it takes to Tempi to drift from Morphagene once you have removed the clock cable?
it will eventually drift out of phase, but probably take a long time to do so. if you change gene size or varispeed then it'll go out of phase immediately of course. if you're not modulating those things at all then may as well just keep it patched :)
0:13 'recent fun' can someone link me to the previous video where Walker uses EoSC x 16 to sync rene with a breakbeat? thanks. I've searched, believe me.
the video it's referring to is this one, although i'm not sure it includes the technique you mention :P ruclips.net/video/7SkG0-a_wMI/видео.htmlsi=PQ-3lKAFeY4QAn9V
"let's hear the (glorious) mess we've made"
😉
How do you make a splice like the first one that perfectly loops? I remember there being some software you need to download to place precise splice markers on an audio clip, but I think it wasn't free?
It can be done on the Morphagene itself with the Splice button. With a one-splice Reel like this you don’t need to place Splice points in software, but our preference for placing Splice points is Reaper, which is free to try with no time limit (and very reasonably priced when you are ready for it!)
@@MAKEN0ISEMUSIC thanks for the reply! I guess what I actually meant was, if you're recording directly into the morphagene and manually pressing the rec button how would you get a perfectly looped splice (without having impeccable timing?) In other words, is it possible to "trim" a splice without using a computer to get it to loop perfectly? I guess it's probably easiest to just load the sample by dropping it onto the sd card instead of trying to record from the inputs. Maybe there's a way to do it only on the morphagene by making the gene size super small and scrubbing through to the end of the loop and hitting "splice", then deleting the new splice? Hmmmmm
@@colinwood9717 What I do might be similar to what you are saying, I record a little extra at the beginning and end, then use Gene Size and Slide to "Zoom in" so I hit the transients at the loop points exactly. I hit Splice at these points and then remove the Splices before and after to "crop" it.
@@MAKEN0ISEMUSIC ah cool I'll have to give that a try! Thanks!
Cool! Nice!
Thanks for watching!
how to we get one of those snazzy morphagene t -shirts? guessing I missed the boat on that one :(
2017 release 😵
@@MAKEN0ISEMUSIC I was still fartin' around with my guitar pedals, a few Moog synths and my volcas then... too intimidated by modular at that point.
This presumably means more Morphagenes are on their way?
Yes, Morphagene is on the production line this week :)
@@MAKEN0ISEMUSIC great news, thanks!
Is anyone gonna comment on the emperors clothes? It’s rubbish, a mishmash of mud, an example of how to make morphagene sound like a washing machine.
That's kinda the point. Maybe I love garbage & eat all my meals out of the trash. Maybe I buy from a manufacturer named 'Make Noise' because i want to... make noise. But maybe 'music' is very subjective and the sounds in this video sound beautiful to some (or a lot) of us
Huh?