Another workaround with the backlight flex is to trim the wings from the end and slightly shorten the burned end. you can even remove some of the plastic insulation from the cable if required.
I'm used to PS5 on your channel so when I see something different I like it too. Good repair since I haven't seen anyone put "pad strips" over an FFC and I thought that plastic material wouldn't withstand the heat of the soldering tip. Thank you very much for sharing sir. All the best.
Thank you! It's true, I normally work on PS5s but occasionally something else catches my interest. I was using a tiny pico pencil iron. Also, the reinforced end of the cable seems a bit tougher than the middle.
@@ToltecMerc Understood. Thank you very much for answering me Sir. I have a 30W soldering pencil (cheap) that I rarely use so I covered the metal soldering cap and tip with black electrical tape and stored it in a zipper bag. Thanks to your advice (tip) I will dare to experiment with some similar brown FFC donors although I must find it first. Thank you again, Maestro (it's a pleasure to imagine you at an electronics technical high school in your area). All the best. PS: teacher, professor, instructor are common terms here, but in Mexico we call Maestro someone who changes the way of thinking with their teaching to improve people's lives.
Nice work! Those ones piss me off to .. lol. I have been fairly successful with them though. Like how you fixed that ribbon. Those little strips come in handy from time to time!
Haha i saw that! and It fit perfect! I had a couple different packages of those.. really hard to tell size when your ordering off aliexpress. I have a roll of that copper tape for custom stuff, but i hate it. It has the sticky back that is another thing tomdeal with when applied. In a pinch. Its ok. Strips are better
They are so cheaply made and so easy to tear the cables and break the connectors on them. I hate them, only repairs I like doing on them are replacing, fan, thermal paste or battery.
Maybe you could link down your patreon in your description and list of tools you own be it from amazon list or elsewhere It would be nice.Keep it up youre channel keeps me from deleting youtube all together.Have a good one.
Hello, I would like to ask a question about ps5 repair. Even if I remove IC DA9081 from the PCB and remove the capacitor around it, IC 13-pin and 27-pin ground shorts occur. Request for help. dowajuseyo, jebal
That was a masterful repair on that ribbon connector, superb job. Nice to see something different on the channel.
Thank you! I'm glad you enjoyed!
This video demonstrates pure skill. You could be a surgeon!
That's very kind of you! Thank You!
That trace repair, looked like a pain in the butt. Great Repair, Great Video! Thank You.
Thank you! It went better than I thought it might. I need some more pad strips.
Another workaround with the backlight flex is to trim the wings from the end and slightly shorten the burned end. you can even remove some of the plastic insulation from the cable if required.
I have done that also. Trimmed the length of the cable. I wanted to try something different.
You can work on my brain and I wouldn't flinch 😂😂😂😂
Watching you do your thing is relaxing and educational
Hmmm. Thanks! I'll keep that in mind!
I'm used to PS5 on your channel so when I see something different I like it too. Good repair since I haven't seen anyone put "pad strips" over an FFC and I thought that plastic material wouldn't withstand the heat of the soldering tip. Thank you very much for sharing sir. All the best.
Thank you! It's true, I normally work on PS5s but occasionally something else catches my interest. I was using a tiny pico pencil iron. Also, the reinforced end of the cable seems a bit tougher than the middle.
@@ToltecMerc Understood. Thank you very much for answering me Sir. I have a 30W soldering pencil (cheap) that I rarely use so I covered the metal soldering cap and tip with black electrical tape and stored it in a zipper bag. Thanks to your advice (tip) I will dare to experiment with some similar brown FFC donors although I must find it first. Thank you again, Maestro (it's a pleasure to imagine you at an electronics technical high school in your area). All the best.
PS: teacher, professor, instructor are common terms here, but in Mexico we call Maestro someone who changes the way of thinking with their teaching to improve people's lives.
Wonderful. That was some delicate repair. Loved it. 👍
Thanks! Glad you liked it!
Nice work! Those ones piss me off to .. lol. I have been fairly successful with them though.
Like how you fixed that ribbon. Those little strips come in handy from time to time!
Thank you! I need to get a better variety of those strips. All the strips on the one I had were too small so I had to use the letter "I".
Haha i saw that! and It fit perfect!
I had a couple different packages of those.. really hard to tell size when your ordering off aliexpress. I have a roll of that copper tape for custom stuff, but i hate it. It has the sticky back that is another thing tomdeal with when applied. In a pinch. Its ok. Strips are better
great and easys repair, lets go on.
Thank you! More to come!
Exchange the connector, then all is fine. Cut the FPC by 2mm, cut the "ears" a bit, and it will fit back into the new socket. All done.
I have trimmed the cables before but I don't have any of these connectors. Probably available on AliExpress.
Nice work as always!
Thank you so much!
Great vid ! Top repair ! Keep it up :)
Thanks! I'll do my best!
I watched a video the other day where you repaired a PS5 by replacing the SB. What kind of preheater were you using?
It is a Puhui T-8280.
What pitch was the solder iron tip? Do u use a higher temp for that tip. I have trouble with heat transfer. Great ribbon repair.
I was using a Hakko FM-2032 with a HAKKO T30-I tip.
Good job mate 👍
Thanks 👍
"Well, that was easy" he said lol.
Well, I have had worse when it comes to liquid damage.
Hello Mr how are you, so nice repaire
Hello. I am well. Thank you for watching and commenting!
ToltecMerc: Well that was easy..
KorAllRBare: 😲WAIT! 😳WHAT??? 🤯That was easy????? 🥵🥴
Oh My Dawg.. You're a Technician Gawd!!
Err-APU 👁👍
Thank you!
thanks for doing a video today
No problem. You are quite welcome! Thanks for coming by!
Another nice video and another luck
Thank you! I was lucky it wasn't completely liquid damaged!
Level god mode trace repair.
Thank you! I'm glad you liked it!
They are so cheaply made and so easy to tear the cables and break the connectors on them. I hate them, only repairs I like doing on them are replacing, fan, thermal paste or battery.
They are cheap. There really is no money to be made but sometimes I want something different!
I bet you played the game 'Operation' as a kid! 🤭😉
I certainly did! How did you know?
@@ToltecMerc 🤭
Maybe you could link down your patreon in your description and list of tools you own be it from amazon list or elsewhere It would be nice.Keep it up youre channel keeps me from deleting youtube all together.Have a good one.
I don't have a Patreon. I'm just a hobbyist who likes to record as I repair things. Not a professional RUclipsr...yet.
@ToltecMerc Could you kindly tell me what is the name of your capacitor discharge tool?I'm really wondering..Lol
@@Melo675xvcn TKDMR Sharkpen
@ToltecMerc Thanks alot.Much appreciated.
Hello, I would like to ask a question about ps5 repair. Even if I remove IC DA9081 from the PCB and remove the capacitor around it, IC 13-pin and 27-pin ground shorts occur. Request for help.
dowajuseyo, jebal
Nicely dunn sir😅
Thank you sir!
Do you fix xbox series x no video issue my hdmi port looks fine just no video lmk sir?
Do you fix xbox series x sir mine shows no video and hdmi is fine lmk please?
Lucky " I "😂
I will take it! Thanks!
My ps5 won’t turn on