Ihr sprecht davon, die Maschine sei nicht warm genug beim ersten Bezug, aber gerade dafür ist doch die PID da, oder nicht? Wäre das Problem nicht einfach zu umgehen, indem man durch den Siebträger einfach vor dem Bezug heißes Wasser gibt?
Hallo, Eine PID Steuerung hat nichts mit der Aufheitsphase zutun. Damit kannst du die Temperatur/Druck im Kessel steuern. LG Das Davide Costanza Team !
Profitec Go makes a hell of a noise PID is located at a very inconvenient low place You always have to bend over to view and work with the PID. Do take care not to burn your fingers Rather irritating The lid of the watertank is sitting losely on top and rattles when the vibration pump is working. It doesn't slide in neatly too Why not a hinge? The lid is wacky. Even the Bezzera Home has a hinge. The driptray itself is rather small and wacky. and doesn't slip in neatly as well. Metal on metal. Driptray becomes very hot and there is a great chance that the solder joints become loose. Even solder hot spots are visible. The sidepanels and back panel are connected to each other in a clumsey way You have to purge the steamwand twice before making a cappuccino. Making Americano's is tricky because of the short distance The Profitec Go has no smooth workaround and is sloppily put together. All in all definately not barista friendly The ECM Casa Classica is a far better choice. Having a much more refined finish. No cut corners but wrapped panel edges angled. Stainless steel boiler for the best tasting espresso. No hoses in the water reservoir. The vibrationpump is far more quiet. It surely does have the finesse.
Because of the rewarding reviews I did order the Profitec Go. After a week of use I returned it. I encountered too many irritations and annoyances. The build quality is poor. Cut corners and sharp edges all around. When pulling a shot the vibration pomp makes a hard ratling noise. Very irritatating The driptray is wacky. The lid of the water tank is just a piece of metal on top of it. Working with the pid is very awkward because it's located at a very uncomfortable place. Before making steaming the milk you have to purge the steamwand twice. It's more like a washing machine. The body panels are connected to each other in a very cheap way. The ECM Casa Classika is a far better choice. The vibration pump is more quiet. Stainless steal boiler for the best tasting espresso. And easy in maintenance. Larger watertank and driptray. High end build and finish. Somewhat more expensive but a 1000% more quality.
Vielen Dank für das Video. Ich finde es super, dass ihr auch Maschinen testet, von denen im Internet eher selten Videos zu finden sind. Ich überlege aktuell einen Kauf einer Profitec Go 100 oder aber einer Lelit Victoria PL91T, welche ihr ebenfalls schon getestet habt. Habt ihr eine Meinung im Vergleich der beiden Maschinen zueinander?
Gerne können Sie uns telefonisch (089/28977472) oder per E-Mail (info@cat-costanza.de) kontaktieren, damit wir Sie bei der Entscheidung unterstützen können. Alternativ können Sie uns direkt im Fachgeschäft in der Thalkirchner Straße 57, 80337 München, besuchen, um eine persönliche Beratung zu erhalten! Wir freuen uns auf Sie :)
Ich hätte auch Interesse. Welche hast du gekauft? Profitec Go scheint besser. Lelit Kaffeemaschinen haben keinen guten Ruf. Ich mag den Lelit pl91t. Aber ich fürchte, es ist von schlechter Qualität.
Warum ist den die Höhe so dämlich begrenzt? Was ist die maximale Tassenhöhe um die Tasse ohne kippen zu entnehmen? Ihr müsst jedesmal die Tasse kippen um sie zu entnehmen. Eine Waage beim Bezug zu nutzen ist ja unmöglich.
Es wäre auch möglich einen Bodenlosen Siebträger zu nutzten. Dann umgeht man das Problem. Wir sind trotzdem sehr überzeugt davon. Für die sehr kompakte Größe liefert Sie ein perfektes Ergebnis in der Tasse ab.
Was denkt Ihr wie oft man die Maschine entkalken muus, wenn man Purania Wasser verwendet bei ca. 6 Espresso per Tag. Wird das dann bei Euch gemacht und was kostet sowas ca.?, Danke schonmal vorab.
Hallo Helib, Dieser Kanal ist unabhängig von unserer Werkstatt, in dem Fall würden wir dich bitten die Werkstatt zu kontaktieren. Hier der Link: www.cat-costanza.de/reparatur LG Das Davide Costanza Team!
The very short distance between bottom of spouted portafilter and the dip tray is a massive dealbreaker. Profitec literally repeat one of the weaknesses of GCP.
Ihr sprecht davon, die Maschine sei nicht warm genug beim ersten Bezug, aber gerade dafür ist doch die PID da, oder nicht? Wäre das Problem nicht einfach zu umgehen, indem man durch den Siebträger einfach vor dem Bezug heißes Wasser gibt?
Absolut - einen "Leerbezug" vorab und alles ist gut ;)
Hallo,
Eine PID Steuerung hat nichts mit der Aufheitsphase zutun.
Damit kannst du die Temperatur/Druck im Kessel steuern.
LG
Das Davide Costanza Team !
Profitec Go makes a hell of a noise
PID is located at a very inconvenient low
place
You always have to bend over to view and work with the PID.
Do take care not to burn your fingers
Rather irritating
The lid of the watertank is sitting losely on top and rattles when the vibration pump is working.
It doesn't slide in neatly too
Why not a hinge?
The lid is wacky.
Even the Bezzera Home has a hinge.
The driptray itself is rather small and wacky.
and doesn't slip in neatly as well.
Metal on metal.
Driptray becomes very hot and
there is a great chance that the solder joints become loose.
Even solder hot spots are visible.
The sidepanels and back panel are connected to each
other in a clumsey way
You have to purge the steamwand twice before making a cappuccino.
Making Americano's is tricky because of the short distance
The Profitec Go has no smooth workaround
and is sloppily put together.
All in all definately not barista friendly
The ECM Casa Classica
is a far better choice.
Having a much more refined finish.
No cut corners but wrapped panel edges angled.
Stainless steel boiler for the best tasting espresso.
No hoses in the water reservoir.
The vibrationpump is far more quiet.
It surely does have the finesse.
You guys made a fantastic review with some amazing coffee and milk frothing 😀
Thank you for your assessment!
Have a nice day.
Because of the rewarding reviews I did order the Profitec Go.
After a week of use I returned it.
I encountered too many irritations and annoyances.
The build quality is poor.
Cut corners and sharp edges all around.
When pulling a shot the vibration pomp makes a hard ratling noise.
Very irritatating
The driptray is wacky.
The lid of the water tank is just a piece of metal on top of it.
Working with the pid is very awkward because it's located at a very uncomfortable place.
Before making steaming the milk you have to purge the steamwand twice.
It's more like a washing machine.
The body panels are connected to each other in a very cheap way.
The ECM Casa Classika is a far better choice.
The vibration pump is more quiet.
Stainless steal boiler for the best tasting espresso.
And easy in maintenance.
Larger watertank and driptray.
High end build and finish.
Somewhat more expensive but a 1000% more quality.
Vielen Dank für das Video. Ich finde es super, dass ihr auch Maschinen testet, von denen im Internet eher selten Videos zu finden sind. Ich überlege aktuell einen Kauf einer Profitec Go 100 oder aber einer Lelit Victoria PL91T, welche ihr ebenfalls schon getestet habt. Habt ihr eine Meinung im Vergleich der beiden Maschinen zueinander?
Gerne können Sie uns telefonisch (089/28977472) oder per E-Mail (info@cat-costanza.de) kontaktieren, damit wir Sie bei der Entscheidung unterstützen können. Alternativ können Sie uns direkt im Fachgeschäft in der Thalkirchner Straße 57, 80337 München, besuchen, um eine persönliche Beratung zu erhalten! Wir freuen uns auf Sie :)
Ich hätte auch Interesse. Welche hast du gekauft?
Profitec Go scheint besser.
Lelit Kaffeemaschinen haben keinen guten Ruf.
Ich mag den Lelit pl91t. Aber ich fürchte, es ist von schlechter Qualität.
😊
ich glaube das bei der Pro 100 die Entlüftung über den Kaffee Bezug geht und nicht über die Dampflanze
Hallo,
Wir bevorzugen die Lüftung über die Lanze.
LG
Das Davide Costanza Team!
Warum ist den die Höhe so dämlich begrenzt? Was ist die maximale Tassenhöhe um die Tasse ohne kippen zu entnehmen? Ihr müsst jedesmal die Tasse kippen um sie zu entnehmen. Eine Waage beim Bezug zu nutzen ist ja unmöglich.
Genau das ist mir auch aufgefallen. Ein Becher für einen Americano passt das bestimmt nicht drunter. Schade.
Es wäre auch möglich einen Bodenlosen Siebträger zu nutzten. Dann umgeht man das Problem. Wir sind trotzdem sehr überzeugt davon. Für die sehr kompakte Größe liefert Sie ein perfektes Ergebnis in der Tasse ab.
Ein Vergleich und Empfehlung zu Lelit wäre gut.
Was denkt Ihr wie oft man die Maschine entkalken muus, wenn man Purania Wasser verwendet bei ca. 6 Espresso per Tag. Wird das dann bei Euch gemacht und was kostet sowas ca.?, Danke schonmal vorab.
Hallo Helib,
Dieser Kanal ist unabhängig von unserer Werkstatt, in dem Fall würden wir dich bitten die Werkstatt zu kontaktieren.
Hier der Link: www.cat-costanza.de/reparatur
LG
Das Davide Costanza Team!
The very short distance between bottom of spouted portafilter and the dip tray is a massive dealbreaker. Profitec literally repeat one of the weaknesses of GCP.
Yes, but it's still a good machine for a single household :)
Get a bottomless portafilter, problem solved.
@@Fent89 NO
Wieso klappert bei mir die Wasserabdeckung???
Gute Frage :-)