DRIVING MY TURBO RX8 - THE UPDATE!
HTML-код
- Опубликовано: 21 ноя 2024
- #rx8 #turbo #jdm
WATCH UNTIL THE END FOR FLYBYS AND LOUD NOISES!
We're back again with an update on how Cygnus is doing! A rundown of things that have happened with the build, what we've done, and most importantly, you get to see how he's performing so far. Don't forget to like and subscribe for even more of this content, and thank you for the support guys!
Yes, finally some turbo action for Rx8 owners.Sounds so good!! looking forward to more video's on this.
Hope to show more of this content yo! 🙌🏽
Thanks for including the Q&A for those of us old folk that aren’t on the Gram! The pulls sound GREAT! Cheers Josh!
You're welcome! I appreciate that different platforms will house different generations, but I try to include as much as I can 😆 And thank you! It absolutely rips for sure 🔥🔥🔥
My dad hitting his card on the screen for his RX8, I'm piffing money at my screen for my RX8. You're revolutionising the market for these cars that need some serious love and so does your channel!
I appreciate the kind words dude! 🫶🏽 Fingers crossed we won't have to wait much longer!
Think I speak for everyone when I say we're very excited to see the development journey progress (and see what else you can destroy) x
I dont even own an rx8 but the day i do i will come back to these videos
That's the beauty of these videos - they aren't going anywhere 😎
Just stumbled across channel - finally some new content on RX 8'S - yes interested to see how this goes and how the rest of the engine responds to it....
The rx8 getting a turbo might finally get this car back on the map
That's the end goal for me 🫶🏽
This is super exciting, I would 100% be interested in buying this setup
Sounds incredible and looks like its pulling like a train! Loving the afterburner too, sign me up for that 😁
Oh it pulls! 👀
Yes laddddd!! Let’s goooooo. Big up Josh, such a nice guy 🔥
@@ThomasJones02 my guy! 🙌🏽🖤
another mad lad with a Brappa! Awesome work
Thank you dude 🫶🏽 Someone's got to wave the flag! 😂
I've been doing as many supporting mods to my RX8 in hopes of turboing it one day (studs, RX7 seals, bigger fuel pump, some temp management, ignition upgrade, etc.). Josh, if all goes well, you are a hero that we Renesis owners don't deserve! I'm actually curious why the ceramic coating didn't last, maybe because it's so low and it got exposed to a lot of the elements? Cheers from the USA, looking forward to more developments, as I too would prefer to keep the stock ECU over getting a Haltech.
Awesome stuff, Good to see you back at it. Those tunnels in town taking the abuse :)
LOL!!! the flames 🔥🔥😅👌🏻
Nice Car Nice wheels ❤
Pfffff lol those flames at the end.
Tickles that teenage bone from the 2000s
@AJZulu it's what we all want secretly! Glad to see it was approved 😆🔥
gad dayum. mans doing bits. Wish i had the income to own a rotary, but at least there's a channel i can watch for it. Keep it up and strength to you, you absolute mad lad♥
Wheels look mad. Excited to see how it does on the Dyno. Hope youre recovering well ❤
@Ebb1337 thanks dude! 🫶🏽 Recovery is going smoothly. And more importantly, dyno video coming soon. 👀🔥
thank you for continuing to develop the renesis ^-^ my rx8 is ready for your turbo kit, when it is on sale.
kisses from France
@@anthonyverstavel61 and thank you for your continued support! You'll see it on this channel when it's ready 🫶🏽
Expecting a huge V8 but here comes the 1.3
Why would I want a V8 when I can use even more fuel, make less power and make more annoying noises with my 13B? 🤣🙌🏽🫶🏽
those exhaust pops are ridiculous🤣
We like the fire 🔥
I'm shocked that I found your yt channel, subbed waiting for the kit
update: after watching this video I bought my rx8 back (forced the owner to sell it to me) 🙌🙌🙌
This is the wholesome content we like to see! 🫶🏽🖤 And we're a little ways off with the kit at the moment, there's gonna be a bit more development over the winter and hopefully final testing in the Spring!
@@BlackstarMotorsport👀
Hello to rotary BRAPs from Russia
looks and sounds so good. That is the best looking turbo install on an RX8 I have ever seen. Like you said you can't even tell it has a turbo. One question- How will this kit work with stock apex seals?
It will work with stock apex seals, but only up to a certain point. Low boost is the key.
Woooooo good rotary content in the UK, it's all the rare 👌
@@moominadam84 I feel like I chat a lot 🤣 But I'm glad it's good enough! 🫶🏽
Man that thing looks so cool.
Thank you 🙌🏽 It's certainly a head turner, especially when the screamer opens 🤣
ahh man I love this sooo much, I neeedz it!
Hello from Greece . reallu happy u made your own chnnel . wish u the best
@peterga3658 thank you! And I hope to keep things exciting for you 🫶🏽
Love from Germany. Very interesting Videos. Ive just subscribed, keep going👍
I will do my very best, thank you for your support! ❤️🔥
That is fkn radd!!!
It's funny as hell! 😆
Amazing! Will there be an option to bring you the car, do a rebuild and fit the turbo in the same go?
How do you price the rebuilds, I know it depends on a lot of factors, but let's say I don't need new housings
Slide into the the DMs on Facebook or Instagram for specifics, but generally speaking for a rebuild, best case you're looking at £3900 🎉
I have a 04 RX-8 Bridgeport, racing clutch, full 3 inch exhaust, im just looking for the right turbo kit to install, im waiting bro.
Shouldn't have to wait much longer my friend 🤞🏾
That rx8 is so cool, sounds mental! Where do we go about joining the peak district cruise? I'm pretty local to you, cheers!
I do it once a year in the spring time, usually around April or early May depending on what shows share the same weekend. 🎉
good to see you back and well, where are you going for the dyno, i could benefit from my fd being on it, literally no idea what it does/history of the engine etc.
Motorsport And Performance in Batley (Formerly Rotary Revs) is where I would go for the dyno. Otherwise, Advocult Motorsport also gets stellar feedback from UK FD guys 🫶🏽
@@BlackstarMotorsport cheers josh, ill give them a call.
Looks like it's time to buy an RX8 then!
They're great cars for the money, honestly!
Hope your recovering well 💪🏾
Good to see you again! Hope you're recovering well. RX8 is gaining much positive recognition recent years. I love the sound of your 8. Is it still on stock ECU? I'm planning on boosting my S1 next year and I'm glad you're preparing some kits for that, but then I wanted to do it myself it as much as I could apart from sending my engine for studding and cutting rotors for REW apex seals, I feel they are must have for reliable build, I wanna get ~300HP then ~350HP, for me it't perfect power that RX8 should have out of factory. I already have street port, 53mm radiator and modded ECU for better cooling etc. But just in case - will you send kits to EU?
Also you mentioned to use both 9 spark plugs for lead and trail. So it's only about having 4 trailing ones and put trailing one also in place of leading? Cause they are different length and I'm wondering.
Thank you! Recovery has been going very well 🙏🏽 I am still on the stock ECU. Kits can and will be sent to the EU as of when they're in production 👌🏽 And for the most part, everything you just mentioned will definitely support 350hp. Keep ontop of the cooling and it should be fairly reliable 💫
Spark Plugs, I would get some NGK race plugs R7420-9L or R7420-10L for the leading. You want the length of the plug to be the full length, and the L plug is longer on the Renesis as you know.
@@BlackstarMotorsport Good to hear! Thanks for help! I'm waiting when my 8 will get back from body and paint job and I have there waiting 53mm koyorad radiator as previous owner installed some crappy chineese one so I had to be careful on temps in hotter days. People were telling me that 300hp is max for stock ecu, and I didn't want to change it so I was like ok 300hp first then ECU swap and 350hp, so I'm glad to hear that I don't need to swap it! Also what's your current rev limiter? I've seen after turbo'ing some of them were like to 8k some full range. Again thanks and I can't wait to see Cygnus dyno numbers
im all for this kind of thing
Me too 😎 #SendItSunday
Great progress Josh.
International customers?
Could your kit include all pipework and IC?
Thank you! The idea is that the kit will include everything you need to make it work on the RX-8, even the intercooler and pipework. 🎉
@BlackstarMotorsport perfect! Basically a Greddy kit but with all the drawbacks resolved!
What abou LHD rx8s?
It will be problem free on the LHD RX-8's because you don't have a steering shaft in the way 😂🎉
Nice vid, keep it coming 👍
@@danielpavely8548 💯👌🏽
Happy release day! 🎥🔥
Love you habbo
Hell yeah man! 🎉🙌🏽
I have a TT with near 600hp now, but fuck do i miss my RX8. It's like the 5 cyl, magic noises.
Can't go wrong with either when it comes to the sound 🙌🏽✨️
Couple things and keep in mind I only have been through half the video so far. Have you run aftermarket oil cooler thermostats, I switched to the hks ones they open up at roughly 165f my engine runs cool now and brings the water temps down, cruising at 185 in heat. You should try versatune flash software get the full version unlimited flashes and customization for tunes. This would be the most user friendly device and you don’t need anything other then a laptop and obd2 adapter to flash.
I have RX-7 thermostats currently as they do open up slightly earlier than RX-8 ones.
I have not tried Versatuner but it does get some good feedback from many owners. I have the pro version of MazdaEdit which does offer unlimited flashes, etc.
I found out the honey comb air straightener does not work as good as a screen straightener. I use both and made it run very smooth. Also can you support versatuner? Thanks
The honeycomb has been fine for me. The important part is making sure that you have at least 30cm of straight airflow before the MAF so that the readings aren't obscured.
I have never used Versatuner but I will take a look into it. 👌🏽
As we all know the renesis motors aren't very reliable, is adding boost going to make it need rebuilds more often? Is it possible to upgrade the internals like you would when forging say a 2jz?
We can't 'forge' a rotary, but we can balance and clearance rotors, and stud and dowel the block. It all depends on how far you intend to take it. ✨️
Im here 🤗 you're the man
🥰🫶🏽
Yeah bro, REW is expensive but it pays itself off not having to do continuous rebuilds. It sucks Mazda basically doubled the price. Pretty much ruined a lot of enthusiasm.
Thanks for sharing Josh
Indeed, there was a point in time where REWs were cheap enough to justify the swap. Not anymore now, which is why I'm determined to bring boost into the RX-8 platform at an affordable level. Selfishly, I want the RX-8 to be recognised as a capable car, as good as the RX-7 FD3S. Give it time though, it won't be long 🏃🏾♂️🔥
The superior chassis 😉
Noice, is this still a 6 port rennisess engine
Love it
thanks' man congrats
Have you looked into the space difference when being used on a LHD rx8
Space on the LHD will be significantly bigger. 😂 The US and Europe have it so easy!
@@BlackstarMotorsport Have you thought of looking into that to have a kit for the extra space or know of another company with a good stup for LHD
@KAPE4 there's a few kits around the globe for LHD, Turbosource do one, and RX8Performance too. 👌🏽
a beatiful RX8 S2 , i have same but red
Mine is just a S1 with the R3 face 😂 But yours will be really nice! Definitely get some compression back and enjoy it, you'll love it more 🎉
Would a street port with this turbo produce flames like that too?
It's all in the tune 👌🏽🔥🔥🔥
Question, would your kit require that you need the FD apex seals, and if so would your proposed price include fitting them?
Looking good there after blowing yourself up.
Last makesure you checkout RAD potential since he's doing the rotory gods work just like you.
Up to a certain point, maybe 300-320hp, the stock apex seals would be fine. The drive-in, drive-out service is purely for fitting the kit and loading on a base tune to be able to use the car safely on a 5 or 7psi wastegate spring. Any more than that, and you would definitely need some fuelling upgrades, amongst other things 💸
FINALLY
I'm In Michigan, but I'm building a race spec Denny that could properly benefit from some boost. I have an na hybrid too
Well, when the development has finished progressing, feel free to show your interest in the turbo kit ✨️🫰🏽
Your car is nice
Why thank you 😘
good stuff, very interesting. she sounds naughty! love it
That screamer is unreal 😩💦
Man that rx looks sexy . Do you know any rx8 breakers I would like that front end too awesome seeing the kit come to life my rx is not there yet. But definitely want a kit
Just keep an eye on the FB Marketplace. They come up from time to time. 🤞🏾
What front spoiler is that, and is that an R3 front bumper?
@@TomHoppe It's the standard R3 front bumper apart from the foglight blanks 👌🏽
Hi hoy many whp max resist Gearbox 6vel ?
Next video title...'towing my RX8'. All jokes aside though its nice yo see something different on RUclips and hurbo RX8 are not that common. I respect the risk and having the gaving the balls to do you.
Ain't that the truth 😂😂😂 But nonetheless, it's all part of the development!
Any idea on cost of an R3 front-end conversion? I've been toying with the idea of an RX-8 for about a year now and the thing that ended up putting me off was the insane tax you pay on an R3 (I far and away prefer the looks of a face-lifted car, not to mention those lovely Recaro seats...)
@AndyQuinton costs roughly £1000 for some second hand R3 parts, around £700 for a bodyshop to spray the panels, and your time of course.
@@BlackstarMotorsport I've done more research into this now and I think it's actually more cost effective to just go for an R3... I'll feel like the government is stealing from me every year but it will be a second car and will only be on the road for 6 months of the year anyway.
I suppose I should be thankful that fire breathing rotary cars haven't been banned entirely!
If you know anyone looking to move on a clean R3 either with or without a functioning engine let me know! 😂
Genuinely curious, what do people like about the R3 front? To me its the same "corporate face" that every other Mazda had slapped on, and wasn't designed for the original car. I know it's all subjective but I'm always interested when someone likes the newer one!
I like your car
I have a RX8 to 2004
Cherish it! I like the early ones. 👌🏽@@waverleymotilal1356
lets gooooooo
What turbo kit is installed? (full spec pls)
Watch the video fully. It's all in there. 👌🏽
Would the kit work on S2/R3 models aswell?
Only with the sump altered, but yes it should technically be the same. I have yet to test it on an R3 🥸
Would love to boost my R3 one day, will definitely be looking at your kit when the day comes 👍
can you do this to my rx8? I'm really interested.
When the kit has been finalised and produced, just holla 👌🏽💸
How much boost can a 4 port 4-speed automatic handle
Don’t bother dude. I mean that in the most kind way.
We didn't get automatics in the UK unfortunately! I know that the 192 can take a similar amount, but ultimately the trans is what's going to be holding it back as far as I'm aware. They don't cope with much torque at all. 😆
It can handle stock spec over that it will blow up
what ecu are you running?
Stock ECU. It's good for quite a chunk of boost you know!
@@BlackstarMotorsport for rew swap with facelift rx8 any suggestion?
@@alexkyriakidis6580you 100% need a standalone ECU. Haltech gets my vote for the RX-8, they have CAN capabilities so they work with other systems in the car (ABS, etc)
When you taking me for a ride?
When I next see you man 👌🏽🔥
21:25 he drives it
Sends it* 🏃🏾♂️😂