Bro you are a life saver Infiniti wanted to charge me 3800 for parts and labor buying the part for 1300 and a local shop is going to install for around 3-500 is was about to go trade it, this is my first major issue in the 4 yrs I’ve owned the car blessing to you. You definitely just got a new subscriber.
I have the same thing on my 2015 infiniti q50 hybrid. Control system error and speed sensor. It won’t go over 15mph. What do you recomend to do. Thanks bro.
I am having the same issue with my 2014 Infiniti Q60. Same codes and it won't go over 10 with puttering or sounding like it wants to stop. My question is, Does the valve body have to be replaced? Or can the output shat sensor just be replaced? Also, how much does all that cost?
Only proper diagnostics can answer that. However all 3 or 4 cases I've had it needed the tcm. If that is the case, it not a cheap repair. Easily over 3k
@gautorepair OK. I have a 2016 Q50 RWD so mine shouldn't need to be programmed correct? Do you order from dealer online or your local dealer? I'm in FL as well.
@gautorepair OK. I have a 2016 Q50 RWD so mine shouldn't need to be programmed correct? Do you order from dealer online or your local dealer? I'm in FL as well.
You might want to do another video on that cruze because even if you replace both at the same time it pops again and even if you put on a bypass ot will still pop o know this from experience the only way I found to stop it from sucking air is to seal off the value cover check valve after putting on a bypass
Got quoted in Miami "Alonso Transmission' in Miami Florida - 2.k$ - 2.8k - In house finance is available as well. Blessings!! I feel horrible inside for my current situation TCM error, I'll replace it in a few months and update. Sensor was not recommended to change instead of the entire Valve cover unit (TCM) any recommendations please don't hesitate! Thnx in advance - lmk if you can possibly assist in Miami.
That's actually not a bad price. 3k give or take is about right. Make sure you are getting a new dealer part and not some crappy remanufactured tcm from Ebay or Amazon
@@gautorepair update - dropped off the Car just now in South Miami - Paid cash final full price - $2,500 - New OEM part to be installed, etc. maps.app.goo.gl/Xf9V17kXRqdvx8su7 AAction Transmissions 5886 Commerce Ln, South Miami, FL 33143
Hey bro I replaced my valve body pulled up a code p0720 replace my valve body replace the TCM on top and it's showing me codes but I erased the codes and they go away do you know the problem or the fix here is the codesP1705-00 TP SEN/CIRC A/T P1721-00 P0729-00 Gear 6 Incorrect Ratio
You can do it, trust me. So people laughed when I said I would do it in our car. There is a guy who posted step by step instructions on a forum. If you do a Google search for 2015 Q50 P0720, the forum with his instructions pops up. It even has the links for the factory service manual. So I bought about $90 worth of cheap tools from Harbor Freight. Metric socket set. Snap ring pliers. An inch pound torque wrench. And a fluid pump. I rented jack stands and a jack from True Value. Here's the thing, it cost $75 a day to rent them, but if you rent them on Friday, you don't have to return until Monday, but they only charge for one day. Which was great because it took me all three days to do it. I know they guy in this video did it in a few hours but he is a professional. I was doing it on the ground when it was 112° the first day and 108° the next two days. We live in North Las Vegas. But yeah, I actually had a lot of fun doing it. I didn't have anyone to help me. I just put in my earbuds and rocked away while following the instructions step by step. I was shocked when it worked without any problems. A year later it is still working.
Hello, thank you for your video. I have the same problem with my 2015 Q50 and am not sure if I should buy an Automatic Transmission Valve Body from the dealer for 1900.00 or Amazon for 500.00. Do you know what is the average labor cost for this type of work? thanks.
Do not buy a valve body for a Nissan 7 speed automatic from eBay or Amazon. Most all of them come from China, and they are crap. When it comes to something like this, ONLY buy from Nissan/Infiniti.
@@gautorepairif I buy one from a wrecked q50 and they are both 7 speed with a 3.0tt engine can the year of the vehicle be different? Mine is a 2016 3.0 premium and the valve body is from a 2018 3.0 redsport 400. Do you think it will be plug and play?
You want to be careful what you say in your videos. a friend of yours & mine was doing a very low-level electronics tutorial in a video on a paying customer vehicle in the workshop, took a long time to do the tutorial, did a poor job of the tutorial, and then stated he needed to go get authorization for another hour of diag, WTF, I mentioned in the comments to be ready for a court case, hopefully the owner did not see the video or got some sort of refund??? Thank you for the inside information and as of today's date, about 1000 of your viewers have this information. If this was my video, I would give a much different title to attract viewers based on the preprogrammed info on this 7-speed tranny and I would include the model of tranny and which vehicles it is installed in, the part number, where you ordered it from, and gain thousands of viewers for the foreseeable future. I am now suggesting a new video to include all this info plus what you would like to add, maybe how easy the job was with some tips, etc. cheers.
Bro you are a life saver Infiniti wanted to charge me 3800 for parts and labor buying the part for 1300 and a local shop is going to install for around 3-500 is was about to go trade it, this is my first major issue in the 4 yrs I’ve owned the car blessing to you. You definitely just got a new subscriber.
Thanks for watching and your support
You didn’t program it ?
Or the shop did that for you
Hi this is also my first issue in 4 years and Infiniti also quoted me $3800!!! I’m in TX can someone please tell me where I can get a valve body from?
Why isn’t there a recall for this issue?? It has caused me so many problems!!
I have the same thing on my 2015 infiniti q50 hybrid. Control system error and speed sensor. It won’t go over 15mph. What do you recomend to do. Thanks bro.
aye good video man, do you the part number for the valve body by chance?
I am having the same issue with my 2014 Infiniti Q60. Same codes and it won't go over 10 with puttering or sounding like it wants to stop. My question is, Does the valve body have to be replaced? Or can the output shat sensor just be replaced? Also, how much does all that cost?
Only proper diagnostics can answer that. However all 3 or 4 cases I've had it needed the tcm. If that is the case, it not a cheap repair. Easily over 3k
Infiniti replaced my valve body,but they said the car still wants to stall at a stop .p0725 code.Any advice?
Not sure if you fixed it engine crankshaft sensor
I replaced my valve body last year . I’ve put 5 k on my car since now I’m getting the p0720 code again.
Did you get a new unit, or used
How did you fix
Good job mate.well explained
hey amazing video...The 2017 q50 with the vr30ddtt engine of 300 hp and 400 hp have the same issue with the trasmission?
I have 2015 q50 I have two codes. P0500 -p0720 Do you think is the valve body
Yes indeed - but get three recommendations - simply calling some shops in your local area.
Hey did you figure this out?
@@Lynwood2888so replacing the valve body
@@Lynwood2888 2,100 from my end - mechanical is all okay - Valve Body needs to be replaced 💯
Both codes will be fixed after replacing the valve body, correct?
Where are you buying these from? Im hearing conflicting answers whether they need programming or not.
I get them from the dealer. The 7 speed transmission already comes programmed. Its the only one that im aware of that comes programmed
@gautorepair OK. I have a 2016 Q50 RWD so mine shouldn't need to be programmed correct? Do you order from dealer online or your local dealer? I'm in FL as well.
@gautorepair OK. I have a 2016 Q50 RWD so mine shouldn't need to be programmed correct? Do you order from dealer online or your local dealer? I'm in FL as well.
I order from local dealership
I bought from dealer and installed. No programming needed. Shifts smoother and no more code/limp mode. Appreciate insight
Wit my experience just bring to dealer and trade new car , that thing cost to much to fix and will happen again trust me
You might want to do another video on that cruze because even if you replace both at the same time it pops again and even if you put on a bypass ot will still pop o know this from experience the only way I found to stop it from sucking air is to seal off the value cover check valve after putting on a bypass
Where did you get the new TCU that worked?
I recommend dealer only
@@gautorepair thanks
I’m about to buy one that won’t go over 80mph do you think this is the issue?
Same issues - I will R/R the entire TCM or Valve cover unit
Got quoted in Miami "Alonso Transmission' in Miami Florida - 2.k$ - 2.8k - In house finance is available as well. Blessings!!
I feel horrible inside for my current situation TCM error, I'll replace it in a few months and update.
Sensor was not recommended to change instead of the entire Valve cover unit (TCM) any recommendations please don't hesitate!
Thnx in advance - lmk if you can possibly assist in Miami.
That's actually not a bad price. 3k give or take is about right. Make sure you are getting a new dealer part and not some crappy remanufactured tcm from Ebay or Amazon
@@gautorepair perfecto 💯😎 thnx hermano 💯👌💪🙏
@@gautorepair update - dropped off the Car just now in South Miami - Paid cash final full price - $2,500 - New OEM part to be installed, etc.
maps.app.goo.gl/Xf9V17kXRqdvx8su7
AAction Transmissions
5886 Commerce Ln, South Miami, FL 33143
Hey bro I replaced my valve body pulled up a code p0720 replace my valve body replace the TCM on top and it's showing me codes but I erased the codes and they go away do you know the problem or the fix here is the codesP1705-00 TP SEN/CIRC A/T
P1721-00
P0729-00 Gear 6 Incorrect Ratio
Where you located having same problem. I'm in SFL
South Florida
How much did the unit I replaced cost? I'm from Mexico and I can't get it.
Thanks good work. Do you know if the speed sensor requires programming?
No i does not
Do you do local repairs ? In near Miami 33175?
You can do it, trust me. So people laughed when I said I would do it in our car. There is a guy who posted step by step instructions on a forum. If you do a Google search for 2015 Q50 P0720, the forum with his instructions pops up. It even has the links for the factory service manual. So I bought about $90 worth of cheap tools from Harbor Freight. Metric socket set. Snap ring pliers. An inch pound torque wrench. And a fluid pump. I rented jack stands and a jack from True Value. Here's the thing, it cost $75 a day to rent them, but if you rent them on Friday, you don't have to return until Monday, but they only charge for one day. Which was great because it took me all three days to do it. I know they guy in this video did it in a few hours but he is a professional. I was doing it on the ground when it was 112° the first day and 108° the next two days. We live in North Las Vegas.
But yeah, I actually had a lot of fun doing it. I didn't have anyone to help me. I just put in my earbuds and rocked away while following the instructions step by step. I was shocked when it worked without any problems. A year later it is still working.
What is this wrap 4 you're. Using to reprogram ???
Remote Assisted Programming. Service by drew industries to remotely program or reflash ecms
@@gautorepair man my car transmission just downshifted an hour ago and will shift at 5000 RPM causing the po730 code FML
What's up man! How much you pay for that lift?
At the time about 2k
Do you have to program it after installing? Or plug and play
On the 7 speed transmission is plug and play
Does this work for hybrids?
Hello, thank you for your video. I have the same problem with my 2015 Q50 and am not sure if I should buy an Automatic Transmission Valve Body from the dealer for 1900.00 or Amazon for 500.00. Do you know what is the average labor cost for this type of work? thanks.
Definitely dealer. I've had customers buy Amazon and ebay parts and had to redo to hob again. Do it once and forget it
Do not buy a valve body for a Nissan 7 speed automatic from eBay or Amazon. Most all of them come from China, and they are crap. When it comes to something like this, ONLY buy from Nissan/Infiniti.
Go to the junkyard get it for cheap
@@gautorepairif I buy one from a wrecked q50 and they are both 7 speed with a 3.0tt engine can the year of the vehicle be different? Mine is a 2016 3.0 premium and the valve body is from a 2018 3.0 redsport 400. Do you think it will be plug and play?
@l3gacy430 I don't know
Do you recall what the list and cost prices were ? My brother owns a shop 200 miles away and he can get cost price
I do not but i know it was about or close to 2k for the tcm
Are you local ? To SFL ?
Yes
Where are you located
South Florida
@@gautorepairwhere in south florida i’m in orlando u got insta?
You want to be careful what you say in your videos. a friend of yours & mine was doing a very low-level electronics tutorial in a video on a paying customer vehicle in the workshop, took a long time to do the tutorial, did a poor job of the tutorial, and then stated he needed to go get authorization for another hour of diag, WTF, I mentioned in the comments to be ready for a court case, hopefully the owner did not see the video or got some sort of refund??? Thank you for the inside information and as of today's date, about 1000 of your viewers have this information. If this was my video, I would give a much different title to attract viewers based on the preprogrammed info on this 7-speed tranny and I would include the model of tranny and which vehicles it is installed in, the part number, where you ordered it from, and gain thousands of viewers for the foreseeable future. I am now suggesting a new video to include all this info plus what you would like to add, maybe how easy the job was with some tips, etc. cheers.
I changed my transmission valve body now the car won’t start 😤
I dont think that has anything to do with the valve body. Is it cranking and not starting, or it does nothing
@@gautorepairmy car won’t star or crank my Mechanic thing I have to do same job u did what u think ? It’s a 2016 2.0
Normally as far as I'm concerned the valve body issue should not affect the starting of the car
l