Это видео недоступно.
Сожалеем об этом.
How to change power cord for Andis Master
HTML-код
- Опубликовано: 20 мар 2018
- How to change power cord for Andis Master
My Clippers...
Wahl seniors goo.gl/2co2e6
Wahl Cordless Magic Clips goo.gl/ra4sSw
Oster Fast Feeds goo.gl/LVyRej
My Trimmers/Outliners
Andis Slimline Pro Li goo.gl/afZby4
Andis Blackout Edition T Outliner goo.gl/6psh6Y
Wahl Hero’s goo.gl/9vSweg
Other Items
Wahl color guards goo.gl/DhpjSt
Andis Double Magnet Guards goo.gl/7ugFbB
Graff Etch Hair Pencils goo.gl/kdoUjw
Andis Ceramic Blade goo.gl/EA4cNR
Wahl 2 hole 1-3mm Blade goo.gl/BQZKwQ
Braun Series 9 Shaver amzn.to/2FqK07S
Towel Steamer - amzn.to/2Bvgn1Q
Thanks for the info . I was handed a pair today and was asked to fix them. So now I got down because of your video. Thanks brother because of you I’m gonna be the hero!!
Yo i got some brand new clippers only used one time and stoped workin no power
Gracias amigo por compartir tus conocimientos, ahora los podré hacer solo soy full andis
From the cord black is hot and white is neutral usualy
You don't have to take the motor out to change the cord. But cut the wires before you remove the bracket to pull out the cord out or you could pull the wires out of the motor.
RAM Transport LLC I did it that way bro and it honestly isn’t worth doing the job all awkward just to avoid taking the motor out. I re-did it and took it out of the housing just so I can use my helping hands to hold the wires up for me and get a proper solder. Just had to remember to put the wires through the bottom of the housing.
Great video bro. I had the same issue with the soldering tip till I did a little research and realized that the tip was full of oxidation so I either had to replace it or clean it really well with a brass brush till it completely exposes the copper. Finally, you just wet the tip so it lets out the heat properly. Thank you for the video.
@@barberciscobarberfranky6354 it works great for me I change about to master cords per day as a clipper machanic. I also use grey wire ties so that I don't have to sauder.
Cool
...Thanks.....When I put my power cord on I'm clicking on this again....I have everything that I need Including my cord....This video has been saved for a while and I'm getting ready to use it
Hi everyone! I have a question. If i want to replace the cord wire for andins and instet do put the us cord i can put a europe cord ?
where did you get the cord?
Internet
the repair was done correctly but why you never cleaned the inside all the way it is part of the service,
great video, lots of valuable info. do yo have any info on replacing 3-wire, andis master? its the one with a ground wire.
I will try and find one and do a video on it
Green wire goes to ground. The screw that holds the switch down.
How you doing, love the video was really great and informational. I wanted to know if you would know any reasons as to why my masters would just stop turning on all together. One day I plugged my masters up, flipped the switch and nothing happened. No power, no noise, nothing. I took them apart looked at every component I could and I still can figure out why they won't work. I wanted to know if there is something else I should try before resorting to changing the power cord. These clippers are fairly new and don't have any ware or tare on them from years of use. I hope you will be able to help me out, Thank you. Once again nice video !
I would try and look the the power switch and make sure everything is connected there if not then just swap the cord it’s like $10 on amazon
Alex Townsend Thank You
If a master doesn't come on it's a bad cord. If it stays on it's a bad switch.
I have the same problem
Very informative
I don't have a soldering iron. Can I just connect with electrical tape?
How tf did you do that bracket that goes under the power cord
Nice 👍
Damn... I wished you would have shown how to get the screw back in for the cross member bar (I think that's what you called it)..
Probably the reason why you skipped it.. I at least feel better that I'm not the only one having problems with that..
Overall, great video tho.. Thanks..
gussi123 seriously the only thing I have left
Did you figure out how to do it?
@@nickguerrero5184 My lord I really wish he didn't mention to loosen the cross bar. I like others, unsrewed it completely by mistake. I finally figured out to back out the big screw on the side and I was able to screw in the cross bar screw.
Dope
U need what else to solder
What is the difference between the "improved" master and the regular andis master ? Is the "improved" master the fade master? Because i have the og master with the trash cord and i want to know if the "improved " master is any different .
I’m not a fan on masters so I haven’t used the improved masters yet
Can't get the cross bar screw back in 🤷
trevor edwards just snapped mines 😫
To get cross bar screw back in place use the metal hook its a tool for the screw on the side (w the 2 holes) Once removed it move the spring back into position so the cross bar screw can be put back into place.
Ese cahopin no sive
U Need to Clean your repair-customer's clippers Better dude! =Better Service!
Hey Boss , Hate to tell you but the black wire is always the hot wire . Just like in your breaker box . Peace
Thank you 🙏🏻
Your welcome Brother. Keep the hair flying !
He says at one point the red wire is hot, but it's not, since it's connected to the white, which is always the neutral, and the black is hot, which is why it's connected to the switch
I couldn't see much of the video you had it zoomed in too much in one place
You need to use steel wool to clean the tip of your soldering iron. That's why it wasn't working. Too much old, built up solder
And a dab of flux to clean the metal to accept the solder. Much stronger connection.
Man this video fucked up my clippers.
this was good. Cloud's Diamond....has some nasty music...totally distracting.
Thank you
Dead wrong Black is line otherwise HOT. Green is ground and only on 3 wire ML.
camera angels is horrible