🔥 How to FRAME Walls 🤜 Steel Framing / TINY HOUSE 7 X 4,80 ✅ Drywall
HTML-код
- Опубликовано: 11 сен 2022
- 🔥 Drywall partition ▶︎ How to Build a metal framed wall 💪 PLADUR
👇 👇 👇 👇 👇 👇 👇 👇 👇 👇 👇 👇 👇 👇 👇 👇 👇 👇 👇 👇 👇
• 🔥 Drywall partition ▶︎...
Profiles for exterior and wet areas
These are profiles that the difference is their composition.
They are made of galvanized steel type DX51D and have a Z450 galvanized protection (except for the U Profile, so they are suitable for indoor humid areas, semi-outdoor areas and outdoor areas. Depending on their geometry they can be vertical elements (Studs) with a nominal thickness of 0.7, 1 or 2 mm, or horizontal elements (Master or Channels) with a nominal thickness of 0.6 or 0.7 mm.
▶︎ What is an OSB Board?
An OSB board is made up of several layers of wood chips glued together with pressure applied. The layers are not arranged in any direction, as it may seem, but rather the directions in which the chips of each layer are oriented are alternated in order to give the board more stability and resistance.
▶︎ What wood are used?
Mainly coniferous woods are used, among which pine and fir stand out. On some occasions also leafy species such as poplar or even eucalyptus.
I love steel framing. Never done it on a house, just small commercial spaces.
Mate, just found your channel so I’m a new subscriber now but just wanted to say you must be the most practical framer I have seen, commonsense and practical and very easy to follow. Thanks for sharing
pp
i expected from the title that this would be instructional, i have questions that this didnt begin to answer, such as do the exterior studs have to all be cut to the same length like in wood framing or is it just the ends like in some videos of i saw of interior metal stud framing, where there was some wiggle room between the first and last studs, relying on the strength of the metal and the screws to hold things up? is the spacing the same as in wood framing? what is with those corner things?
what type of screws did you used?
hi, one question please, how strong, thick are the metal purlinks, what kind of screws werwenden they for it, thank you
sir, can u tell me how much galvanized steel type DX51D did uu used to finish this house
I would add gussets to the joints in the truss to improve the strength of the connections. Wonder if it is faster than wood framing and if it is less expensive than wood framing
It is faster and cheaper. You can buy everything prefabricated. It’s also lighter and stronger
Bravo 👌👍👏 , impressive work.
Dude's a brave man, metal framing without gloves!
Aye !! ! 😎
So for the diagonal braces are you actually cutting a 45 or just sliding it into the other piece?
Killer work 👌🏽
Hola Cristian,,felicidades por tu contenido,se nota tu profesionalidad, estoy diseñando mi casa y este video me sirvió de gran ayuda,pero tengo una duda,tengo que hacer una cubierta de 6 metros de ancho, sería viable este sistema? que medidas tendrían las viguetas,? todo esto lo confirmaría con un arquitecto, pero es para ir haciendo cálculos,muchas por todo,un saludo
I think this is nice, it can carry loads and lateral moments but you forgot the lift force of winds during storm, I assume the floor is well connected to the foundation, I suggest to put washer on the screw connecting to the floor, and use screws with wider heads
I suggest he put hold down bars, threaded bars 20cm in from every corner, one down beside every window and door, and ensure there is one every 2.4 meters. These are set in the concrete and go to the roof frames and can be tightened with long threaded nuts. It is cyclone proof then.
Excellent work 👍
Outstanding work! I’m subscribed and waiting for more of your videos.
why the strap bracing if u add osb sheating? the osb is all a massive strap. ( if u add enough screws obviously)
Buenas. Usaste perfil de 0.5 de espesor? Yo tengo q hacerme una tiny de 5x4 y habia pensado utilizar los perfiles de 0.5mm pero por lo q investigue de usa el de 0.9mm
Que opinas?
Well done, great video! Thank you for sharing mate - NEW SUB 🙏🏻
What's the thickness of the metal in these profiles? Options I find locally are 0.5mm or 0.6mm or 1.5mm thickness for pairs: 70mm x 50mm x70mm & 70mm x40mm x 70mm
Awesome work! Thank you for the upload!
This may be a dumb question but is it cheaper than lumber?
nice work where did you get your roof metal and how much did it cost
Witaj,pozno Cie znalazlem ale musze przyznac ze latwo i przyjemnie sie oglada, ciekaw jestem czy przyjmujesz do przy na przyuczenie ale tak po prostu, nawet jeseli osoba miala byc tylko do pracy jako pomocnik. Dzieki serdeczne. Pozdrawiam
Where did you buy the metal stud work as I want too build a shed/man cave thanks
Mi hermano felicitaciones!. Mi respeto y admiración por su trabajo. Me identifico como usted.
Qual placa vc usa para a parede externa?
Cuanto de luz (espacio entre soporte) resiste un canal doble de 150🤔
Dude u rocked that project out!
simplemente hermoso, este video es mi inspiracion para construir dos recamaras de steel frame en un segundo piso que es de concreto, tengo demasiada teoria en construccion y he hecho trabajos menores pero me siento capaz de hacerlo yo mismo
felicidades y muchas gracias por compartir
😅
Can you show how you cut the 45° brace?
Greatly talented. Doing it all alone.
Are you using a stars crew to attach the frame sir?
Hem çalışmanız hem de çekimler çok güzel , tebrikler...
Well Possum on a gum bush... I thought those were roof trusses in the beginning. Also, are the outside wall studs thicker gauge do to load bearing requirements?
hola Cristian, excelente vídeo!!! , y dónde compras los perfiles ? Gracias.
Competence is such an amazing thing to watch😊😊😊😊😊😊
That's a nice job 👏
I like this technique alot, do have a drawing that u xould share, what gaige r the studs
saya dari indonesia sangat suka dg fidionya.....sangat mantappppp😅.... cara kerja yg sangat profesionl banget.sehat selalu..hati hati dlm bekerja😅
super project 😀
Hi,
In the video description you state that you use DX51D galvanized steel Z450. Could you please tell us the brand or supplier? Thank you in advance.
En la descripción del vídeo indicas que utilizas acero galvanizado tipo DX51D galvanizado Z450. ¿Podrías indicarnos la marca o el proveedor? Gracias de antemano.
Great job bruh 🎉
With all those screws, should you use locktight or something?
What gage steel are you using?
Is that galvalum 7.5 or 10?
Excelente 👌
Hi,
DX51D galvanized steel with Z450 galvanized protection. What is the brand of this equipment?
Thank you in advance.
Sincerely yours.
i like the positive energy of this vid. I saw many vid of differnt way of building wall, but when it come to concrete wall, 3D printing take so much hate and crap. I think the metal work community is so much better than the toxicity of traditional concrete. I guess this is why we have so much improvement and tech on metal than concrte in construction.
Perhaps warming up the concrete before and during application will upgrade it to selfhealing characterics ( like the old romans did) and less toxic.😎
@@constantverellen505 u may not know. Heating during the curing process reduces the compressive strength. Since concrete harden and get stronger every year, it would take us 100s of years for modern concrete to catch up the strength of Roman concrete. The reduced early strength of Roman concrete is evident by thei structure where they have to use a thick layer to compensate. The chemical property of Roman concrete is actually a research point where we could include in our modern concrete without reducing our strength be use we are using concrete to carry way more load than the Romans.
Are these the same metal studs used indoors?
mate!!! love the handy work, precision and effort - but you know there are companies that roll & punch your required sections to a fraction of a millimeter... off to the races
I suggest he put hold down bars, threaded bars 20cm in from every corner, one down beside every window and door, and ensure there is one every 2.4 meters. These are set in the concrete and go to the roof frames and can be tightened with long threaded nuts. It is cyclone proof then. ASWD45 cyclone standard.
Que distancia tiene el espació que estas cubriendo, que medidas estas usando para cubrir esa zona??
Hola Cristian buenos días, por lo que veo en el video parecen ser perfiles PGU y PGC de 70 calibre 22 (0.7mm) es correcto?. Lo que me intrigan son los tornillos con el que armas la estructura soy de Argentina generalmente se usan T1 3/4 punta mecha o autop 1" Hex punta Mecha. Que tornillos serian esos?
No sé en Argentina pero en España se llaman metal-metal o chapa-chapa
Muy buen trabajo, que medidas tienen los perfiles usado?
Amazing brother
Nicely edited.
Galing lodz
Hi mad man i have got same land area, How many pices of galvanized steel type DX51D i need to order ?
El piso es una loza tradicional con una cubierta de placas de madera ?
amazing work how what is the duration of this construction?
Hello...your video is great, one of the best, I can build on a wooden platform and how I would do it, please I want to make one like yours, could you explain that to me please.
The metal he is working with looks like 25 ga. never use less than 20 ga., i worked with metal studs for 35 years.
I’m a steel framer. Your technique is ‘odd’ but i can see your skill none the less.
Yeah. He frames his "walls" like a carpenter thats odd..
@@hetfield144 Yeah, not like a ...
Hi sir thx for this beautyfull vidéo 📼 👍👀💝
How many days it took from start to finish?
awesome where do you live? i live in Canada and id use 2x6 exterior walls. just because it's cold here.
excelent, sir. what the name of the fram sir?
Which screws are you using ?
Olá boa noite
Existe possibilidade de saber que tipos de raia utilizou e parafusos?
São raias de 3 m ou 6m?
Qual a espessura da raia?
Que parafusos utilizou para fixar as raias entre elas?
Obrigado
Doesn't the Engel grinder heat up the metal and that can cause rusting later?
Muy buen armado, me hubiese gustado que colocara la pared de draywall
Hola usas perfiles steel framing? O son de pladur, gracias buen trabajo
yo creo que es drywall, pero para un segundo piso yo lo haria de steel frame
Wow! You're very skilled.
Can this type of framing withstand strongwinds, typhoon and hurricanes?
I'd like to make one.
Yes but concrete is better.
Thank you for your work!..
Gracias por tu trabajo!..
Obrigado por seu trabalho!.. " Agora no meu idoma"
Also, I,would have invested in a tack welder, especially for the beams! Belt and suspenders. Anyone with a metal garage door can relate to self tapping screws failure….100%.
how long was the process( days, Hrs)
Impresionante tu labor
nice job
Qual acabamento exterior para proteger as madeiras???
Very nice How much was the metal
Where did you get the Kit?
What is this project cost? Please,looks like a nice warehouse ❤
Servira para una terraza arriba?
lo que hace es con perfiles de chapa galvanizada esta todo carito los tornillos son iguales de los que se usan en argentina y uruguay t1 de punta aguja o t1 de punta mecha para mas seguridad el metodo que utiliza para hacer esta estructura esta buena por que refuerza mucho mas tipo cerchas el video esta claro esta clarito es un obrero no engaña a nadie lo felicito y medio buenas ideas gracias compañero desde uruguay
Eres el P..... AMO del DRYWALL.
Muito top ,pena que aqui ainda e mu caro o sistema 😢.
Здравейте подобна къща да ли може да се направи с по голяма долина площ примерно 64 квадрата благодаря
I find the steel very thin van it really stand ?
Como é o nome dessa base de madeira??
Nice! ⭐⭐⭐⭐⭐
te quedo chingon
Good 👍
Olá, gostei imenso do video. Excelente. Pode me dizer qual a quantidade e carateristicas do material utilizado? Pois eu quero fazer uma estrutura idêntica em termos de tamanho numa área que tenho por cima da garagem mas não sei como contabilizar a quantidade e tipo de material a utilizar. Agradeço desde já a ajuda. E concerteza serei seguidor do canal.
Leia normas e manuais. Esse video é só um ASMR e ele não vai te responder
honestamente el esqueleto prefiero hacerlo en tubo y los acabado en drywall, excelente trabajo
Can I build like a bedroom on top of that? or it won't support the weight? (¿Puedo construir como un dormitorio encima de eso? o no aguanta el peso?)
It should support human. Research “SIP” or “Structural Insulated Panel” construction
He’s using SIP onto of joists
Tem o telefone pra faser orsamento
Are those average commercial drywall metal studs ?
How fast you speed up the video?
Saludos, ¿unos montantes de metal de calibre 20 y de 3" 5/8 pulgadas de ancho los puedo usar para construir un techo exterior?
Молодец 👍
can you list all the materials used? there dimension and sizes? screw type and size?
@@projectskyindonesia what size did you used sir?
yes but we need to k ow because i am from foreign country which the light steel need specific sizes upon ordering
I would also like to know what gauge steel you used.
The steel appears to be 25 gauge thickness track and stud. Also 2 5/8" width. Screws look like 1/2" self-drilling (not self tapping) pan head screws, based on my experience with the material
I no