Thanks for this teaching. I made this production with d same ingredients, except for d hcl which I used 1litre instead of half litre. The problem I have now is although my production came out good but it doesn't remove tough stains, what can I do?
@@Smilesopinions sometimes, they post the videos just to guide us, expectially if you already knows how to go about it. But if you don't hv any idea then, by all means mistakes is awaiting u.
Well done sir and thanks for all ur teaching, pls the following day after my production i notice alot of lumps and settlement after string it together its not as tick as the regular toilet wash. I will appreciate ur response. Thanks
I did the first two steps; adding nitrosol but immediately after mixing the caustic soda in water, and added the solution to the first one, the mixed nitrosol became lumpy... Hope do I make that right??
Sunshine, i also noticed that the my harpic separeates after few days.The nitrosol reminds down and the liquid part comes on top.I would be very appreciative of your advise.Thank you
Thanks So Much for your comments. At Sunshine Resources we pride ourselves in turning Job seekers into Entrepreneurs. That is the basics of Our curriculum.
Thanks for the reply, i tried using CMC, it didnt dissolve fully and after adding Conc HCL, it seperated, just like a broken emulsion. What could be the reason?
@@Scasoskincare Cellulose like CMC or Natrosol (Ethyl Cellulose) thicken up in presnce of alkali like Caustic Soda (Sodium hydroxide) but addion of Acid like Hydrochloric HCL would cause deemulsification,
so please, adding hydrochloric Acid to the product. wont it give problems to the one who will use the product. Acid can cause serious problems. please this is my worry. Any clarification
Sir, can you please name some good perfume that one can use for all these products you're training us to do? Liquid soap, Hand wash, Dettol, Harpic etc.
Thanks for this teaching. I made this production with d same ingredients, except for d hcl which I used 1litre instead of half litre. The problem I have now is although my production came out good but it doesn't remove tough stains, what can I do?
Weldone . ... how tough is the stain
Hello can l make herpic using HCl and acid thickener without using other chemical ?
Thank you for the tutorial but I have one question if we didn't get nitrosolt can change by other salt ? Like table salt and industrial salt
No you can't
thanks very informative. please i wanted to ask if one is producing it for commercial purpose, what preservative should the person use?
Kitchahie
On.oFf
I
Formaline
Thank ypu for the video, will it work if i reduce nitrosol quantity and add some salt?
Do the experiment....
God bless you for the tutorials sir, the toilet wash became watery after some days
Same here too
@@Smilesopinions sometimes, they post the videos just to guide us, expectially if you already knows how to go about it. But if you don't hv any idea then, by all means mistakes is awaiting u.
God bless you, you are a great teacher
Thank you! 😃
Well done sir and thanks for all ur teaching, pls the following day after my production i notice alot of lumps and settlement after string it together its not as tick as the regular toilet wash. I will appreciate ur response. Thanks
Same result I got. Pls did you figure out what was wrong?
Mr sunshine please reply this for help
It’s possible you didn’t store properly or each chemicals where not properly dissolve before mixing them
You are the best. Your introduction and you gave mesurements of ingredients.Your tutorial excellent thank you
Great.... thanks
Such a great tutorial Sir and what is the required Ph for the formulation
Hi,
Dear sir. Which kind of color......? Acid color or food color....? Pls reply
Thanks
Hello mr. Sunshine i wanted to ask should i use light or dense soda ash? Keep up the good work! Thank you!
Use dense
In the case of any spillage of HCL on the skin what should be done?
Please be careful... but in case of any accident please rinse affected area with lot of water
I did the first two steps; adding nitrosol but immediately after mixing the caustic soda in water, and added the solution to the first one, the mixed nitrosol became lumpy...
Hope do I make that right??
I love the way you teach. Thanks a lot Darling
Thank you! 😃
Thanks
I ddnt use nitrosol in the method I used but it's not as thick as this can I add nitrol at this stage?
I don't think so
Wow! What a lesson. Be blessed Ebong.
Thanks
Can you help us where to secure all those needed chemicals for your product,as I want to try making it as it's a great help for me in my home
Visit soap chemical shop
Looking good!What is the concentration of the HCL?Also,how thick is this cleaner?A number of cleaners I have seen on YT have an acid thickener added..
Thank you for this .
So difficult to get acid thickener in Ghana
THANK YOU SO MUCH. THIS IS REALLY HELPFUL👍
Thank you so much for the lectures Mr Sunshine
God bless you
Antisol Powder. Where is buy and Price sent details Thank you Sir.
Sunshine, i also noticed that the my harpic separeates after few days.The nitrosol reminds down and the liquid part comes on top.I would be very appreciative of your advise.Thank you
will find out why
@@SunshineResourcesSrtv Thank you,will be waiting for your feedback
Thanks so much for this. You are seriously empowering people through these videos of yours
Thanks So Much for your comments. At Sunshine Resources we pride ourselves in turning Job seekers into Entrepreneurs. That is the basics of Our curriculum.
Ya
Wow, God bless you more and more. I' m set for this production. See you soon🚶🏻♀
nitrosol powder is not available here but the available here is carboxy methyL cellulose (cmc), is it okay to use cmc?
Yes
Your teaching is amazing ❤
Thanks
Welcome
Is it possible to add sulfuric acid (battery acid) during the production?
No
Thanks for the video. Instead of using Nitrosol, what would be another alternative?
Use antisol or carboxyl methyl Cellulose
Thanks for the reply, i tried using CMC, it didnt dissolve fully and after adding Conc HCL, it seperated, just like a broken emulsion. What could be the reason?
Nitrosol or is it NATROSOL which is Ethyl Cellulose manufactured by Hercules Co.
@@Scasoskincare Cellulose like CMC or Natrosol (Ethyl Cellulose) thicken up in presnce of alkali like Caustic Soda (Sodium hydroxide) but addion of Acid like Hydrochloric HCL would cause deemulsification,
Dynamo Don Thanks alot! Makes sense to me now.
Really appreciate it
Hi, it is a great training from you. Thank you. what is the Hydro Chloric Acid % used in this formula?
concentrated one
There are so many types of sulphonic acid which one?
Labsa
Nice video.. Is there no need to make the PH balance while adding castic soda with sulphonic acid before HCL addition.
The final solution is slightly acidic to make it attack stubborn stains in your bathrooms and toilet also kill germs
You are a good teacher thank you sir
You are welcome
Thank you sir, may God continue to bless you and the work of your hands ijn
Thank you for valuable information abut Harpic formuulation. I wants to know the actual chemical name for nitrosol, and its chemical formula.
Nitrosol is also called hydroxyl ethyl cellulose
Thank you the Lord will continue to bless and enriched your knowledge
Thanks and God bless you
Thanks...you are a mentor to many up coming millionares
Good day to you Sir. i was able to made my harpic but it was too light. What can i do to correct this so that it can be thick?
Next time use less quantity of water
Dear Bro... Superb method.Will it be thick like harpic quality? Because you didn't show the finished product.
The potency of harpic is not in it's thickness but in the accuracy of the materials mixed up.
Thanks so much for the formula. God bless
Thanks a lot, once again for this useful knowledge. You're my LEADER, indeed. How happy am I?.
Thx somuch anyway isn't possible to give us a video to make dog shampoo?
Ok...... will find out
Nitrasol and antisol both are same?
Thank u so much sir I love ur teaching so much God bless u
Thanks
Thank you for the tutorial, I made it and it makes sense
Thanks
Sir, you are great,
can you supply the materials ,like nitrosol
Sorry....we do not supply the materials....
We have the materials if you still need them
Where do you get these ingredients in Mumbaì?
Will find out
I am wondering what is the use of castic soda in the formulation?Also,which chemical is the foaming agent and biocide for killing germs?
That is a great job sir please keep it up.Your steps are easy and simple, thanks a lot.may God bless the work of your hands,
Good evening sir, please what's the quantity of water used for 15 litres of hapic🙏
15 liters
How can I get the product use in making soap
Good work Sir, God 🙏 blessed, please sir how to make it gel
Ok
I hope so you r a pharmacists but if anyone wants to start to manufacture what do he does.please give inform.Thank you.
What does he do Sir.
Please is it sulphuric acid you mean or siphonic
Sulphonic acid
Nice one our Production manager. Please why didn't you add preservative in this?
Now have started making liquid soap at home without lumps, it really helps reduce cost.
Mr. sunshine, If I add only Hydrochloric acid, Acid thickener, perfume, Water and colour will give me a good result?
But there is no cleaning agents in your formulation.
Thank you
Thank you, i was making the harpic but later after two days the colour changed from blue to purple.What could have gone wrong? Please assist!
its because of the HCl. The dye you used is not stable in acidic conditions
@@gachokakaruru8244 Thank you, then what can i do? How can i make the dye stable ?
@@suzanaatim when you're buying the materials, ask specifically for acid blue
Sir, how many total water add
Hello please how do i get the hydrochloric acid?
visit soap chemical sellers or chemical shops in your area
Sir can u tell me how much quantity of camicals ?
Pls can l add preservative to it
Is natrosol same as thicker powder
Yes.... nitrosol is a binder and a thickner
Thanx Mr can texapon be used when making toilet and instead of what?
nitrosol is hard to find in may county any alternative?thank you new subscriber here🖐👍
MAY THE ALMIGHTY GOD BLESS YOU DEAR
Thanks so much,very educative
so please, adding hydrochloric Acid to the product. wont it give problems to the one who will use the product. Acid can cause serious problems. please this is my worry. Any clarification
The acid will react with the chemicals in the mixture to form substance that can remove stains but harmless to the skin
How much the amount of water you added?
Stated in the video
Hi my i know what are the other name of nitrosol. Because i really couldn't find that in our country.
Sir...can we prepare toilet cleaner without nitrosol?
Bcz it is unavailable to me wherever i enquire
If you do that.....it going to work... but it will appear watery
Sir you are a blessing to me God bless you more wisdom
What is Nitrosol? Possible scientific or current name. I am from Egypt. Thank you
Nitrosol is a binder...... ethyl hydroxyl cellulose...
Tylose..
Tylose
Thanks for this training. Please what is the volume of the initial water measured? How can one determine the concentration? Thanks.
Please explain..... what do you mean by concentration?
Dear sir, please make a video on DOMEX toilet cleaner. Thanks and regards.
is nitroso work like acid slury?
Sir, can you please name some good perfume that one can use for all these products you're training us to do? Liquid soap, Hand wash, Dettol, Harpic etc.
There are so many perfumes.....e.g ampipur,lemon, blue water,banana and so on
Choose one at the chemical shop
Ok
Please give perfume details to use in this product
Perfume does not require any details.... make your choice from the chemical shop.
Very nice ,i like it.Thanks a lot sir.
God bless you...
Please sir what causes the separation?
Bad quality chemicals
Wow!!! You are great. Thank you so, so much.
I appreciate sir.
Will the Ph level be okay?
Very nice n easy
Thanks and welcome
How much water are we dissolving the solids into?
This is so wonderful thank you for the video well done ✅
What a good teacher you are, thanks
Is it possible to add sulfuric acid (battery acid) during this production ?
u r my brave sir. what is the prservative chemical in this toilet wash?
Thank you do much sir for this wondetful imformation .
Thanks
Thank u sir for empowering woman,God bless u sir
Wt is that product we can use for colour
Will find out
God bless you sir, nice job well done
Mr sunshine thanks for all the lessons, please I need your help my toilet wash turn out with many lumps the next day.
Change your nitrosol
Please sir another name for nitrosol?
Am grateful for this . God bess u sir
Well done,
Thanks
Thanks sir for your kind knowledge
Very interesting, may God continue to bless you Sir, from Nneka Makurdi.
Great tutorial
Thanks
What is the chemical name of Nitrosol? Any alternatives?
HEC
@@MsAbdulmujeeb Thank you
How many liters of water
It is stated in the video
Thank you a lot sir.
I will make sure I subscribe for every video and give it a thumb up and hit notification.
What is the another name for hydrochloric acid
HCl
Please I want learn how to make floor cleaner. Can you train us on that?