Where can I find the LCD panel? What model number LCD panel is this? The one you pull out at 8:47. It looks like the one I'm trying to fix has several black blobs in the lower corner. Thanks.
@Vasco da Gama I never found one. I remember emailing the company and didn't get any info on this LCD panel. So gave up trying to get a replacement part. The person I was trying to fix this for ended up getting a nice Optoma projector as a replacement. They are now happy with their current projector. If the company offered to fix it or replace it, it didn't seem worth it for the shipping costs vs the projectors worth. Plus I think it's a flaw in the design, somehow one part of the LCD panel gets enough cooling while the corner doesn't and eventually succumbs to heat.
I've read that this one has loud fan. I see two of them. What are the dimensions of the fans? It seems to be easy to replace them for better and quiter fans. Thank you.
Is there some way I can order replacement parts? I need a new LCD (what you are holding at 4:00) Ive searched the web for some of the code found on the part but cant find anything.
Hi, where can i get replacement parts for M18. There's projected burn mark and now the fan probably have problems too because the projector doesn't seem turn on anymore. Please recommend.
There is 12V silkscreened on PCB power input. But LED might run on different voltage. However i would like to add DC input, so i can power this projector from solar system, car battery or something...
@@harviecz put multimeter red probe on +ve led and black probe on -ve led chip side - measure voltage , multimeter in series connection with led chip - measure current
How do you pop the top off so easily? The hdmi and usb ports are firmly holding down the top shell on mine, I cannot get them to sit behind it so I can pull up. All the screws are out but when I go to remove the top I have no way of getting the ports to not pull up with the top, they are firmly seated in it and I feel like Im going to break them before I can get it out far enough to get them out of the holes.
Did you ever get it apart, Jerry? I had a massively difficult time with it. The angled lip to the right of the USB ports would simply not come over the base. I filed it partly away with a dremel! Made it much easier. Then the left hand side (with the fan slits) would not budge until I realized that there was another screw hidden beneath a little round label on the bottom! AGH! I wonder if the angled lip would have cleared the base if I had found that hidden screw earlier. Good news is the cover comes off REALLY easily now.
agooga sorry for the late reply, yes I got it off, mine was stubborn especially for the first time opening, also probably just being too gentle because I didn’t want to break something, it really feels like your going to when you open this. I understand why they make it difficult but I came close to cutting part of the shell to make this easier as lcd projectors need to be cleaned periodically
What are the sizes of the fan? How is the heatsink mounted? Does it have a regular cpu socket mount? Is it possible to modify and watercool this beast?
hello Eddy! I bought m18, I want to replace fan with less noise, you know which is good as a measure but above all how many rpm has to work? Many thanks! Oh!! Where i go for found update software for this projector?
Hello, don't recommend changing the Original fan, The speed of the fan needs to be debugged by the motherboard. If the third-party parts are replaced at will, it is easy to shorten the life of the projector.
This machine is a sample for display, it will not be sold. As long as the 1LCD projector does not leave a very obvious fingerprint, a little dust will not affect the projection effect, and it is very easy to clean.
yes this model attracts quite some dust, have mine since a month atleast it looks easy to open it... i have worked on dlps before should be no problem....
*Is it possible to disassemble the lens in the projector t26k to remove dust between the lenses? In the message to the order I wrote about the dust between the lenses.*
I didn't want to worry about dust, so I built a base to sit the projector into. It blows filtered air under and out past the side of the projector, past the air inlet ports. It actually shoves a little air through when the projector is off and helps it blow extra air through during operation. Does anyone know if i should leave the fan on after turning off or will this cool the led down too fast? Thanks for any help.
Hello, thank you very much for your support, you buy but from aliexpress: ru.aliexpress.com/item/32982985248.html Recommend buy on November 11, there is big discount on that day.
@@EddyLieu Okay thank you, actually I have a problem with the part we see at 3:43 on your video, this one has a defect after cleaning with a cotton swab as they said, so I decided to disassembly the projector to better observe the defect and now I don't know if Artlii will change my projector.
Эдди делай прошивку на М19, он копия М18, даже матрица таже а это значит что тупит железо, и фризит картинку. Не кидай народ, тряси и программистов ее.Люди покупали товар на новый год, ты не имеешь права так поступать.
I have one /watching this to change the fan /is killing me/i ved buyng mine from second-hand at 89 euros /doesn t desirve that money /my head is spinning after 2 h of whatching /don t recommand
The technik of this chinaprojectors are not bad and of one side very smart! But the casin is very cheap.. too cheap vor this priceclass. For example epson 5300 for 400euro you became a very solid projektor. And 2 jears garantie and a lot of options (keystone, real 24p, frameinterpolation, real 3d option like cinema and and and...and the case are proffesional designet. But i think to buy a f30 only for fun. Maybe makes me happy.. but i let me suprice. It can be top or flop..
Use promo code: "3TOUYINGER" can get an extra discount when placing an order
Where can I find the LCD panel? What model number LCD panel is this? The one you pull out at 8:47. It looks like the one I'm trying to fix has several black blobs in the lower corner. Thanks.
@Vasco da Gama I never found one. I remember emailing the company and didn't get any info on this LCD panel. So gave up trying to get a replacement part. The person I was trying to fix this for ended up getting a nice Optoma projector as a replacement. They are now happy with their current projector. If the company offered to fix it or replace it, it didn't seem worth it for the shipping costs vs the projectors worth. Plus I think it's a flaw in the design, somehow one part of the LCD panel gets enough cooling while the corner doesn't and eventually succumbs to heat.
I've read that this one has loud fan. I see two of them. What are the dimensions of the fans? It seems to be easy to replace them for better and quiter fans. Thank you.
please, what is the size of the main fan on the radiator
Is there some way I can order replacement parts? I need a new LCD (what you are holding at 4:00) Ive searched the web for some of the code found on the part but cant find anything.
The same problem here
Didn't shows the led used and driver for the led...
Hi, where can i get replacement parts for M18. There's projected burn mark and now the fan probably have problems too because the projector doesn't seem turn on anymore. Please recommend.
Did you ever find where you can buy replacement parts?
My M18 does a klick noise if I touch it like some part is a bit lost inside.
Any idea which part it could be? Should I open it to have a look?
Please let me know the write parameters on the lcd screen panel, I am very thank you!
Hello, what type of screwdriver do you use to disassemble the projector?
sir - can you please tell me voltage and power of led chip used in m18 ?
There is 12V silkscreened on PCB power input. But LED might run on different voltage. However i would like to add DC input, so i can power this projector from solar system, car battery or something...
@@harviecz put multimeter red probe on +ve led and black probe on -ve led chip side - measure voltage , multimeter in series connection with led chip - measure current
do you know how to get the lens out, mine's stuck even after all the screws removed?
How do you pop the top off so easily? The hdmi and usb ports are firmly holding down the top shell on mine, I cannot get them to sit behind it so I can pull up. All the screws are out but when I go to remove the top I have no way of getting the ports to not pull up with the top, they are firmly seated in it and I feel like Im going to break them before I can get it out far enough to get them out of the holes.
When disassembling, you need to pull the upper cover back
Did you ever get it apart, Jerry? I had a massively difficult time with it. The angled lip to the right of the USB ports would simply not come over the base. I filed it partly away with a dremel! Made it much easier. Then the left hand side (with the fan slits) would not budge until I realized that there was another screw hidden beneath a little round label on the bottom! AGH! I wonder if the angled lip would have cleared the base if I had found that hidden screw earlier. Good news is the cover comes off REALLY easily now.
agooga sorry for the late reply, yes I got it off, mine was stubborn especially for the first time opening, also probably just being too gentle because I didn’t want to break something, it really feels like your going to when you open this. I understand why they make it difficult but I came close to cutting part of the shell to make this easier as lcd projectors need to be cleaned periodically
I have the same projector, what screwdriver do i need please? The screws are very tiny
What are the sizes of the fan? How is the heatsink mounted? Does it have a regular cpu socket mount? Is it possible to modify and watercool this beast?
My AUN m18up projector doesnt boot and reads "entering recovery system". How can I perform hard reset back to factory settings?
Hello, need flash the firmware, recommend contact the seller get firmware
@@EddyLieu Thanks ... Got the Android 8 firmware from AUN's website and projector is back to normal.
My m18 remote not working any suggestion
When i use keystone correction, the image near the right edge gets blurry. How can i fix this?
for M18 projector no method can fix this problem
hello Eddy! I bought m18, I want to replace fan with less noise, you know which is good as a measure but above all how many rpm has to work? Many thanks!
Oh!! Where i go for found update software for this projector?
Hello, don't recommend changing the Original fan, The speed of the fan needs to be debugged by the motherboard. If the third-party parts are replaced at will, it is easy to shorten the life of the projector.
good to know if you need clean
This machine is a sample for display, it will not be sold. As long as the 1LCD projector does not leave a very obvious fingerprint, a little dust will not affect the projection effect, and it is very easy to clean.
@@EddyLieu ye I clean projector 1 a month as my get in dust quick
yes this model attracts quite some dust, have mine since a month atleast it looks easy to open it... i have worked on dlps before should be no problem....
Can anybody help with this dust problem my m18 has some dust inside and that has black dots on screen ...is their any tutorial to clean it
*Is it possible to disassemble the lens in the projector t26k to remove dust between the lenses? In the message to the order I wrote about the dust between the lenses.*
Hii same dust problem with m18 did you find anything
Next is M19?
*The next video will be with t26k? Nearby lies))*
No dust protection in all of these led projectors.it need to be cleaned after every 5 ,6 months.
@Ring Neck hi, i want replace fan with a one more less noise, do you know rpm speed fan for good work? Thanks!
Any videos or tips how to clean dust in m18
I didn't want to worry about dust, so I built a base to sit the projector into. It blows filtered air under and out past the side of the projector, past the air inlet ports. It actually shoves a little air through when the projector is off and helps it blow extra air through during operation. Does anyone know if i should leave the fan on after turning off or will this cool the led down too fast? Thanks for any help.
i think the size is 80 x80 mm
is the (Smartidea m18), (Aun m18),and (TouYinger m18) all the same company I don't get it. Looks all the same
i want to buy this projector for business purposes please tell how to buy it from u
Hello, thank you very much for your support, you buy but from aliexpress: ru.aliexpress.com/item/32982985248.html
Recommend buy on November 11, there is big discount on that day.
M 18 ka firm ware link batayo koi
I can Finnaly clean the dust out
How did you do it? Are the dust particles on the lens or on the mirror?
hey , you know one shop where i can found : single parts of M18 projector ?
contact the seller where you bought it, if you bought from our company, within warranty time, you no need to pay, just contact the online service.
@@EddyLieu Okay thank you, actually I have a problem with the part we see at 3:43 on your video, this one has a defect after cleaning with a cotton swab as they said, so I decided to disassembly the projector to better observe the defect and now I don't know if Artlii will change my projector.
@@EddyLieu please what is the size main fan for replace with one more quiet? Many thanks
where can I buy led panel sir ?
code of lcd screen panel?
i search that have you found ?
sir ---- can you please open heatsink and show close detailed picture of led chip ?
these days I don't time to do, why you want to see the LED chip?
can you sell ----- led chip , lcd , driver board of this projector separately ? ----- price ?
@@rahulkumar-qu2xo Hello, if your projectors are bought from our company, you can try to contact Aliexpress online service.
@@EddyLieu for self-upgrade or fixing maybe? I want to know about that too :)
@@Mozza_Null yes
Эдди делай прошивку на М19, он копия М18, даже матрица таже а это значит что тупит железо, и фризит картинку.
Не кидай народ, тряси и программистов ее.Люди покупали товар на новый год, ты не имеешь права так поступать.
you shouldint have nails that long unless your an old chinese kung fu master in an old jacke chan movie.
This new line of China made 1080p LED Projectors are overpriced.
I have one /watching this to change the fan /is killing me/i ved buyng mine from second-hand at 89 euros /doesn t desirve that money /my head is spinning after 2 h of whatching /don t recommand
Just child play level projectors not meant for professional use.
👏👏👏
The technik of this chinaprojectors are not bad and of one side very smart! But the casin is very cheap.. too cheap vor this priceclass. For example epson 5300 for 400euro you became a very solid projektor. And 2 jears garantie and a lot of options (keystone, real 24p, frameinterpolation, real 3d option like cinema and and and...and the case are proffesional designet. But i think to buy a f30 only for fun. Maybe makes me happy.. but i let me suprice. It can be top or flop..
Nakhli h ye