needed that,im halfway through the ryefield panther with full interior,thinking 'and the clear plastic hull will fog up like a giant aircraft canopy from tamiya thin.I got the 2017 hummel it was a 2005 mould of a Nashorn with the colour instructions photocopied in B&W with an added page for hummels gun.Didnt tell you to remove positioming parts,all new parts not shown,same price as the ryefield panther with heartbreaking options.Put a tiny plece of solder in tweezers squeeze into little coin shape,put between photo etch pleces,hold with tweezers,2 quick passes with a mini blowtorch cigarette lighter.Fused forever.
An additional comment... When I come to a part of the model where I have to walk away, I just play this video, laugh my ass off, and go back to work. Great job!!
omg all I could think watching this was the Bronco ZTZ99 I just finished hahaha wife and I both searching under my desk and the couch for parts, eventually saying "well, it's the vacuum cleaner's hatch handle now,"
I bought the bronco jeep and 37mm gun in a fit of nostalgia for the monogran kit I built when I was 12. I think the jerry cans in the bronco kit had more parts than the whole 37 mm gun in the monogram model. I still pull it out of the stash occasionally, but I just look at it and sigh
Farken great work! Was a mad, obsessive kit builder for decades, I really appreciate the humor in this one. As a German speaker though it's always jarring to read the subs that have no relation to what I'm hearing, but it's all good!
I feel this, but while mass building his navy...like Christ, I just want hull, superstructure & guns, not the engine room or the tiny lil' people in the section I won't see.
Oh crap.....I'm currently building a Tamiya one, but with a Dragon one in the stash......! I won't be able to not smirk at every stage of the builds from now on.....!
Oh this is priceless, seriously laugh out loud funny. I can imagine the people at Dragon ....".Sir,... it's the Fuhrer,.....he disapproves of our kits, we've been ordered to discontinue the over complicated ones. Especially panzers, Luftwaffe aircraft, oh and make sure the Tiger 1 kit is wiped from existence." 😆
Hahahhahhahahaha funniest shit I have seen on RUclips yet!! But like others on here say only we modellers would get it. Other folks will just scratch their heads and swipe. Great job!
I gave up on Dragon vehicles quite awhile ago. There is just NO EXCUSE for their instructions. Having said that I do like their 1/35th figure sets! Will never buy another vehicle kit from them.
Sanity at last, a Tamiya Tiger. Nevertheless I enjoyed the Academy 1/35 Tiger 1, Exterior - it's a great kit, but no colour instructions with little detail. Paint in DAK colours a breeze, and no parts lost on the floor. Dragon was a good way to finish Hitler, now send one to Ptin to make, full interior too.
Great video! The only thing I don't understand is the hate towards Dragon kits. They are well done and build into nice models. Is the parts count the issue? Are they too complicated for some modelers out there? I have been building for 45 years and build all sorts of kits in different scales including super detailed 1/350 ships, 1/16 full interior German armour (with details and corrections added/made) and 1/8 Pocher classics so parts count has never been a problem for me and issues with instructions, while frustrating are usually easily dealt with. Entertaining and funny video nonetheless and interesting to read the opinions!
Overengineered and WAY overpriced for what they are. A 30$ tamiya kit with some aftermarket pe and a little skill with some milliput or plasto will give you a model that looks just as good, costs far less, and goes together so much easier.
@@elijahhunt9407 Good luck finding a $30 Tamiya kit unless it's one of their old ones. Most kits are overpriced nowadays. Over engineered may be true but that doesn't make a kit bad. It depends on whether one is a true modeler or simply a kit assembler looking for a relatively quick fix. There's nothing wrong with that if that's what makes you happy but tearing down a brand simply because it doesn't fit one's way is pretty lame.
@@michaellemaire5380 High part counts doesn’t equal a kit for “true modelers” or whatever that’s supposed to mean. You can count your rivets on your 70$ kit with premade zimmerit and I’ll stick to cutting off the plastic tool clamps and fuel caps to replace with PE and resin and my milliput and flathead
@@elijahhunt9407 It comes down to what works for you. If one can't afford to spend too much on a kit or just doesn't want to, then they buy within their chosen price range. If one doesn't want to deal with high parts count or complicated assembly, they avoid those kits. We are in a golden age of modeling. We have an unprecedented number of companies out there producing an unprecedented number of subjects we could have only dreamed of before. Yet with all of this, you have those who are never happy and will complain about just anything if I doesn't fit their personal criteria. Just because something doesn't work for you it doesn't mean you have to crap on that company's product. No one is forcing you to buy it! Buy what you want, build it and enjoy it. There is no wrong or right.
@@michaellemaire5380 you asked why there was “hate” around Dragon and I answered. The majority of modelers find it hard to justify paying 70$ for a kit in 1/35 with no interior especially when there’s cheaper alternatives and aftermarket detail sets that will give you the same, if not better results for 10-20 bucks cheaper.
@@thetourettesgamer8851 I just finish it and honestly it's not bad as I thought except these horrible instructions. However I have a Meng M4A3 Sherman and I think I'm gonna enjoy this much more than this dragon kit.
Their Tiger P model isn't so bad. As long as you get over the regular complexities that plague all Dragon kits.............But on the other hand they're the only ones who actually make a kit for my favorite tank.
if you can get one of the early mkIV 3 in 1 kits with seperate tyres and working suspension.It feel's like an achievement.Or the dragon 'PLATZ'mkIV' which is 'tamiyaised.Looks good,just DS tracks in that one though.You can get the 3in1 'super'kits go from £30 to 50 on ebay,cheaper than 'platz'
Loving my Tiger 1 mid Dragon with Zimmerit. Think those are tiny bits?? Try building a Trumpeter D-44 with that microscopic PE. Dragon can be a breeze compared to some kits :P
no to modern armour! Im crushing my ego enough with ww2 armour.I havent built trumpeter kit yet.Finishing Panther F gummistallsmall damphousen or something..6403.After the rfm panther its medieval.The rfm is way over engineered but for the price its cheap and glides together ..almost.Ive been waiting to do a tiger,as i recently built the revosys vk3601.A rfm in disguise.It is like a dragon kit designed by german engineers.And the hull just hints that it will become a tiger.And they give most of the WOT upgrades for the turret and gun.But if the RFM sturmtiger comes out soon? The new dml 'tiki' looks like a good mould.well back to the pe track hangers and tool clamps......\%
That is the "leader" for sure. Always pissed off, always wants more, always wants you to kiss his flag of discontent. Reminds me of my wife. She has many parts. Most of them in one place where she can't find or see them.
Brilliant! A couple other rants: "All those freaking parts and still no interior!" and "Damn it! The Godless Chinese make better versions of my tanks!"
LMAO "I told you not to vacuum under the Fuhrers desk."
except it was spelt incorrectly
Some of the new Mini Art tanks will make him so mad he'll want to invade the Ukraine just to get at the kit designers....
Boy this aged well 😂
Yes, send Putin a Hobby Boss Panzer 1, full interior- it might cripple him too.
So thats why Putin is so mad. Guess he should've stuck with the Revell Walker Bulldog kits.
@@zabercrombie24 Was about to say... Sheeeesh!
Untold, Hitler committed suicide, when he saw the parts count, for the Soar Art Dora railwaygun
I haven't built a model in 25 years but this video still had me laughing my ass off! Well played, sir.
So true, just experienced my first Dragon Panzer kit. Glued 20 tiny parts never realized i will never see them as they are inside the frame.
I've watched this several times, and my ribs hurt from the laughter every time. Awesome job!!
I laughed so hard the neighbour's baby woke up.
As a tank nerd I fully empathize with the fuhrer on this! Lol!
Genius. Now let me sort through my box of spare dragon parts....
bring me a damn tamiya tiger 1 !!!!!
I bet he'd be seriously mad that Tamiya or Dragon produced more model kits than the Reich actually built for each type of AFV.
I haven't seen any funny meme in the scale model community until now
@@avggymbro3734 Maybe they should make one. Only modellers will understand, however.
Too true.
Here is a Zvezda T-34 for you
I feel the Fuhrer's pain, currently building a Dragon Jagdpanther G2
My Dragon King Tiger left enough plastic in the box to build two Tamiya Panzer IV's...... I feel this video.
Just as I came across this, sure enough on my suggested videos to the right is.... drumroll....
A video on the Dragon Tiger!
needed that,im halfway through the ryefield panther with full interior,thinking 'and the clear plastic hull will fog up like a giant aircraft canopy from tamiya thin.I got the 2017 hummel it was a 2005 mould of a Nashorn with the colour instructions photocopied in B&W with an added page for hummels gun.Didnt tell you to remove positioming parts,all new parts not shown,same price as the ryefield panther with heartbreaking options.Put a tiny plece of solder in tweezers squeeze into little coin shape,put between photo etch pleces,hold with tweezers,2 quick passes with a mini blowtorch cigarette lighter.Fused forever.
I feel his pain, Ryefield for the win!
I just picked up their Challenger, haven't started yet but it looks on a whole other level
Finishing rfm tiger 1 fill interior, 3 #$%&÷ months later
"Any wankers who only build Tamiya, Revell and Matchbox without photo etch...." 🤣🤣🤣
I laughed, I cried. At the same time.
Hahaha mega-lol!! This is so utlra nerdie! Only modellers would know exactly what this is all about! >
Hitler resorts to a Tamiya kit
Indeed! Especially the parts under the desk rant. This entire parody is spot on. 🙂
All i wanted was a Tiger 1 with good zimmerit. So spot on 😂
An additional comment... When I come to a part of the model where I have to walk away, I just play this video, laugh my ass off, and go back to work. Great job!!
As a modeler, I'm with AH.
this made me laugh so hard I managed to get fried rice to come through my nose like a soft drink would
He's obviously never built a Bronco kit then!
omg all I could think watching this was the Bronco ZTZ99 I just finished hahaha
wife and I both searching under my desk and the couch for parts, eventually saying "well, it's the vacuum cleaner's hatch handle now,"
I bought the bronco jeep and 37mm gun in a fit of nostalgia for the monogran kit I built when I was 12. I think the jerry cans in the bronco kit had more parts than the whole 37 mm gun in the monogram model. I still pull it out of the stash occasionally, but I just look at it and sigh
Farken great work! Was a mad, obsessive kit builder for decades, I really appreciate the humor in this one. As a German speaker though it's always jarring to read the subs that have no relation to what I'm hearing, but it's all good!
I'll take a Tamiya, or Italeri kit over Dragon any day!😄
Hitler takes a month to do an Eduard Weekend Edition.
OMG, this is precious!
This is GOLD!
Notice his general's reaction once he said "You clowns will finish it!"
That´s where I laughed the hardest!
I feel this, but while mass building his navy...like Christ, I just want hull, superstructure & guns, not the engine room or the tiny lil' people in the section I won't see.
I built one of Dragon's destroyers. 17 parts just to make one sea mine. Ludicrous
It is why Dragon's kits are art. :D
Me, a Tamiya noob: _leaves the room_ 😅
Thanks for making me laugh so hard!!
Oh crap.....I'm currently building a Tamiya one, but with a Dragon one in the stash......! I won't be able to not smirk at every stage of the builds from now on.....!
That was so fecking funny thank you so much
Oh this is priceless, seriously laugh out loud funny. I can imagine the people at Dragon ....".Sir,... it's the Fuhrer,.....he disapproves of our kits, we've been ordered to discontinue the over complicated ones. Especially panzers, Luftwaffe aircraft, oh and make sure the Tiger 1 kit is wiped from existence." 😆
I'm not German but I'm one-hundred-percent positive this is an accurate translation.
Awesome how Ganz played the Role of A. Hi*ler. It´s look total realistic.
It makes watching his version of Heidi's Grandfather a challenge to watch. 😅
Imagine if he would build 1/72 italeri lol
I rekon he would be a pretty good modeller
Hahahhahhahahaha funniest shit I have seen on RUclips yet!! But like others on here say only we modellers would get it. Other folks will just scratch their heads and swipe. Great job!
Epic !!!!!
I gave up on Dragon vehicles quite awhile ago. There is just NO EXCUSE for their instructions. Having said that I do like their 1/35th figure sets! Will never buy another vehicle kit from them.
Now that's funny right there, I don't care who you are.
Sanity at last, a Tamiya Tiger. Nevertheless I enjoyed the Academy 1/35 Tiger 1, Exterior - it's a great kit, but no colour instructions with little detail. Paint in DAK colours a breeze, and no parts lost on the floor. Dragon was a good way to finish Hitler, now send one to Ptin to make, full interior too.
*quietly walks out of the room😂*
Someone please bring der Fuhrer Tamiya 1/35 Tiger I late version w/ ace commander n crew set (8 figures) ... Screw Dragon!
stfu simpletin
Great video! The only thing I don't understand is the hate towards Dragon kits. They are well done and build into nice models. Is the parts count the issue? Are they too complicated for some modelers out there? I have been building for 45 years and build all sorts of kits in different scales including super detailed 1/350 ships, 1/16 full interior German armour (with details and corrections added/made) and 1/8 Pocher classics so parts count has never been a problem for me and issues with instructions, while frustrating are usually easily dealt with. Entertaining and funny video nonetheless and interesting to read the opinions!
Overengineered and WAY overpriced for what they are. A 30$ tamiya kit with some aftermarket pe and a little skill with some milliput or plasto will give you a model that looks just as good, costs far less, and goes together so much easier.
@@elijahhunt9407 Good luck finding a $30 Tamiya kit unless it's one of their old ones. Most kits are overpriced nowadays. Over engineered may be true but that doesn't make a kit bad. It depends on whether one is a true modeler or simply a kit assembler looking for a relatively quick fix. There's nothing wrong with that if that's what makes you happy but tearing down a brand simply because it doesn't fit one's way is pretty lame.
@@michaellemaire5380 High part counts doesn’t equal a kit for “true modelers” or whatever that’s supposed to mean. You can count your rivets on your 70$ kit with premade zimmerit and I’ll stick to cutting off the plastic tool clamps and fuel caps to replace with PE and resin and my milliput and flathead
@@elijahhunt9407 It comes down to what works for you. If one can't afford to spend too much on a kit or just doesn't want to, then they buy within their chosen price range. If one doesn't want to deal with high parts count or complicated assembly, they avoid those kits. We are in a golden age of modeling.
We have an unprecedented number of companies out there producing an unprecedented number of subjects we could have only dreamed of before. Yet with all of this, you have those who are never happy and will complain about just anything if I doesn't fit their personal criteria. Just because something doesn't work for you it doesn't mean you have to crap on that company's product. No one is forcing you to buy it! Buy what you want, build it and enjoy it. There is no wrong or right.
@@michaellemaire5380 you asked why there was “hate” around Dragon and I answered. The majority of modelers find it hard to justify paying 70$ for a kit in 1/35 with no interior especially when there’s cheaper alternatives and aftermarket detail sets that will give you the same, if not better results for 10-20 bucks cheaper.
Lol, this just popped up. If Hitler didn't like a Dragon tank model, definitely don't get him a Dragon halftrack.
I CAN WATCH THIS ***T AAALLLLLLL FREAKIN' DAY!!!
🤣🤣🤣🤣🤣🤣
LOVE THIS!!!
I LOVE Dragon kits! Tamiya too!
Outstanding!
I love your channel keep up the great stuff!!
I just bought a dragon mid production tiger 1, i had choice between a dragon and a tamiya🤣🤣
You poor bastard! How’s it going?
I didn't built it yet
800 parts 😨
Master Jeff bugger
@@thetourettesgamer8851 I just finish it and honestly it's not bad as I thought except these horrible instructions.
However I have a Meng M4A3 Sherman and I think I'm gonna enjoy this much more than this dragon kit.
Too funny mate.....😂🤣😂
i am now building maus from dragon, and i am in shock how bad it is :( i will never again buy another dragon model!!
That Maus kit is quite old, try the recently released Takom 1/35 Maus V2, it's excellent!
Their Tiger P model isn't so bad. As long as you get over the regular complexities that plague all Dragon kits.............But on the other hand they're the only ones who actually make a kit for my favorite tank.
if you can get one of the early mkIV 3 in 1 kits with seperate tyres and working suspension.It feel's like an achievement.Or the dragon 'PLATZ'mkIV' which is 'tamiyaised.Looks good,just DS tracks in that one though.You can get the 3in1 'super'kits go from £30 to 50 on ebay,cheaper than 'platz'
Loving my Tiger 1 mid Dragon with Zimmerit. Think those are tiny bits?? Try building a Trumpeter D-44 with that microscopic PE. Dragon can be a breeze compared to some kits :P
no to modern armour! Im crushing my ego enough with ww2 armour.I havent built trumpeter kit yet.Finishing Panther F gummistallsmall damphousen or something..6403.After the rfm panther its medieval.The rfm is way over engineered but for the price its cheap and glides together ..almost.Ive been waiting to do a tiger,as i recently built the revosys vk3601.A rfm in disguise.It is like a dragon kit designed by german engineers.And the hull just hints that it will become a tiger.And they give most of the WOT upgrades for the turret and gun.But if the RFM sturmtiger comes out soon? The new dml 'tiki' looks like a good mould.well back to the pe track hangers and tool clamps......\%
Freakin' awesome!
I can't stop laughing ooh my that shit is funny. Some should update this with adding RFM and Meng to the mix.
Brilliant! Totally brilliant! Lol.
That is the "leader" for sure. Always pissed off, always wants more, always wants you to kiss his flag of discontent. Reminds me of my wife. She has many parts. Most of them in one place where she can't find or see them.
Brilliant! A couple other rants: "All those freaking parts and still no interior!" and "Damn it! The Godless Chinese make better versions of my tanks!"
that is comedy gold right there
As a wanker who only builds Tamiya, I do not relate to this experience.
This is hilarious!🤣🤣🤣
Definitely As Rich As Rich Could Ever Be…….
I tried many model brands, but I found that Zvezda, Trumpeter, RFM, Panda and Dragon are shit! However, Tamiya, Takom are the best
That's pretty strong criticism. Have you ever considered that perhaps it's your skill set that's lacking?
総統閣下は2023.夏イベ欧州に向けて気合が入っているようだ、球磨。(-ω-)ゝ
ノルマンディー・・・、なんか複雑だニャ～。
Oh thats funny!!!!
I am a german 😂😂
The complete translation is not right.
HAHAHA!
🤣😂😂🤣
Top!!!
Seriously LMFAO....oh God, please make it stop.....
Lol
نحن السلطان غير راضين عن خردوات قادة الدولة في تيسير ملف دول الجوار بقارة أفريقيا وخاصة إنقلاب دولة النيجر.😔
🤣🤣
SIZOFRENIJA
Aky članok 5 NATO keď je vojna tak vojna jednotka bude kradnúť zlato
Sorry but this did not make me laugh. I understand it all, but I didn't think it was funny.
The wide rowboat complimentarily encourage because curler extracellularly bow forenenst a scintillating temple. weak, sweltering self