You are really producing the best , easiest to understand explanation for automation in general in all the internet , I also tried your company products they are reliable and easy to use especially with your online tutorials. Thank you very much
I've been using one of these 32 channel KinCony controllers in my 42' yacht for a couple of years now. I like this product. It is easy to program and their firmware is simple and not buggy. I trust this with all functions on the boat. Of course you should never try to drive any load directly from 5 amp reed relays. Always use them to control more powerful relays for maximum reliability on mission critical systems.
different controller will have different address ID, such as controller A is 1, controller B is 2, controller C is 3. so input unit-ID in Node-Red modbus's node option is ok.
relay controller input port can use for dry contactor sensor, such as door sensor, temperature sensor(but it ouptut OPEN/CLOSE signal , just for detect temperature value whehter arrived. such as T>30℃ then trigger. not output temperature value.)
You are really producing the best , easiest to understand explanation for automation in general in all the internet , I also tried your company products they are reliable and easy to use especially with your online tutorials.
Thank you very much
you are welcome.
I've been using one of these 32 channel KinCony controllers in my 42' yacht for a couple of years now. I like this product. It is easy to program and their firmware is simple and not buggy. I trust this with all functions on the boat. Of course you should never try to drive any load directly from 5 amp reed relays. Always use them to control more powerful relays for maximum reliability on mission critical systems.
thanks, yes, use extend relay for load is better.
Very good control by this system
very useful
👍
Very nice modbus integration with NodeRed. What about if i need to control more modbus controller?
different controller will have different address ID, such as controller A is 1, controller B is 2, controller C is 3. so input unit-ID in Node-Red modbus's node option is ok.
do you have a platform that can be used as a smarthome wall panel?
install home assistant work with panel on the wall.
@@KinCony 8ch module besides being able to function as on/off, can you also add a sensor? such as temperature sensor, door sensor etc
relay controller input port can use for dry contactor sensor, such as door sensor, temperature sensor(but it ouptut OPEN/CLOSE signal , just for detect temperature value whehter arrived. such as T>30℃ then trigger. not output temperature value.)
nice video .
Could you know about node js version ?
i use node.js V12.18.2
没有中文吗?一个中国人讲的外国话俺听不懂
哪里不清楚的,你可以留言