Very nice clean up job, especially with the tools available. Takes a lot of patience. If you can find rubber feet for it, that will keep it from scratching up your floor or table.
Hey, I just wanted to jump in here and let you know I enjoyed the video. I have one that is as bad if not worse than the one you have. I want to restore it soon, I was very anxious to see how you did it. It seemed to be a very old box as is mine and wa curious how you removed the rust..I usually use The magic juice Evapo rust but it would take too much of it to soak. it. I may use the battery charger and soda method I cant remember what it's called but it would be cheap which I am. Grea video and the box looks great.
I put it in a bucket with water and a bit of hydrochloric ácid and let it for a day. If u wanted to do that please be careful wear mask and glasses for eye protection.
In a lifetime I've owned half a dozen cantilevered toolboxes. Everyone of them self destructed after about 6 months of transporting tools to job sites . The other thing I found is that when you pack enough tools for the job, you can't lift the thing. Good job , though , on the restoration! Stavros
I’ve a toolbox just like that, the before version obviously. Probably going to stay like that too, but I can dream the fairies 🧚♀️ will come along some night and make it like your final product. Nice job 👍🏻
Parabéns meu amigo, vc está cada vez mais profissional. Gosto muito de restauração TB, as vezes faço, mas só por hobby. Conheci seu canal e vi que vc é brasileiro, aí já me inscrevi e fui pro Instagram TB, pra fortalecer. Já vi quase todos seus vídeos, sucesso.
Hydrochloric acid partly removes rust but also forms iron chloride that has the same problems. The best way to remove rust is to brush it with a wire brush that eliminates unstable crusts and then treat the remaining pitted rust (that was along all of the inside corners and edging of the tool box) with phosphoric acid. It's cheap and will last a long time.
Nice, though I'm worried that you may haver thrown out these parts at 1:48. You never know, in 20 years you may be looking for a couple broken pieces of plastic identical to these and will regret not keeping them 😆
Hey brother, not sure it's asmr, had to really crank the volume for any effect. My .02 cents :) It turned out just fine as you mention in the description. Function over form!
The title should probably say "rust-damaged" but I'm not entirely sure. Don't worry about it my native language is English and I still don't say it right all the time😂. Great content as always!
Hey guys do you like the vídeo?
Please don’t forget to leave a like and Subscribe! It help me a lot!
With Love - DC! ❤️
Very nice clean up job, especially with the tools available. Takes a lot of patience. If you can find rubber feet for it, that will keep it from scratching up your floor or table.
Thanks Pat's! ❤️
A ideia da borracha no fundo... Gostei! Vou copiar! Parabéns mais uma vez.
Muito obrigado Marcio!
Well done! Back to being a useful box.
Thanks Mitch!
Sweet!
Thanks Bro! 🍬 ❤️
I would put plastic washers between the metals to assist with the leverage when opening closing.
I LOVE A PINK TOOL BOX!
Thanks Shirley! ❤️
100 % better and I liked the lining inside the trays...ready for use.
Thanks Shawna! ❤️
Que demais encontrar um canal de restauro com tanta qualidade e ainda br! Parabéns 🤞🏻🤗
Muito obrigado Renata! ❤️
Que legal! O português brasileiro é a língua da minha mãe.
I have got one of these boxes in need of a such restauration...I wish to keep it for my art supplies...
Its a good box. Thanks for Watching! ❤️
Estupenda restauracion y color de esta caja de herramientas vintage, respetos y saludos desde Venezuela.💯💯💯💯👍👍👍🙏🙏💯💯
Muchas gracias Amilcar! ♥️
I watch your videos for a long time. You make impossible object. Thank you.
Its very nice to know that! Thank you so much! 💗
Hey, I just wanted to jump in here and let you know I enjoyed the video. I have one that is as bad if not worse than the one you have. I want to restore it soon, I was very anxious to see how you did it. It seemed to be a very old box as is mine and wa curious how you removed the rust..I usually use The magic juice Evapo rust but it would take too much of it to soak. it. I may use the battery charger and soda method I cant remember what it's called but it would be cheap which I am. Grea video and the box looks great.
I put it in a bucket with water and a bit of hydrochloric ácid and let it for a day. If u wanted to do that please be careful wear mask and glasses for eye protection.
In a lifetime I've owned half a dozen cantilevered toolboxes. Everyone of them self destructed after about 6 months of transporting tools to job sites . The other thing I found is that when you pack enough tools for the job, you can't lift the thing.
Good job , though , on the restoration!
Stavros
Thanks Steve! ❤️
Great job! Your English is fin. Thank you 🙏🏻
Thanks Durango! ❤️
Well done. What a nice toolbox. Best wishes from Germany.
Thanks Mate! Keep it up!❤️
I have the exact same one, in grey and rust
Hello mister beautiful restoration good job well done my friend
Thanks Vince!
Another fantastic restoration, my friend. Nicely done, looks great! 👍👍👊
Thanks Dirty! ❤️
I’ve a toolbox just like that, the before version obviously. Probably going to stay like that too, but I can dream the fairies 🧚♀️ will come along some night and make it like your final product. Nice job 👍🏻
😆😆😆😆
Thanks Paul! ❤️🧚♀️🧚♀️
I have a bigger version. It has three layers of trays rather than two and is shaped like a barn.
Thanks Phillip! ❤️
Top demais parabéns e essa borracha no fundo ficou da hora 😎, parabéns muito bom
Muito obrigado! ❤️
@@WorkshopDC de nada irmão eu que agradeço gosto de restauração e uso muitas dessas idéias que vejo por aqui vlw TMJ
Awesome job!
Thanks SF! ❤️
Great job 😊👍 great video 😊👌 great final results ❤
Thanks! ❤️
Parabéns meu amigo, vc está cada vez mais profissional. Gosto muito de restauração TB, as vezes faço, mas só por hobby. Conheci seu canal e vi que vc é brasileiro, aí já me inscrevi e fui pro Instagram TB, pra fortalecer.
Já vi quase todos seus vídeos, sucesso.
Muito obrigado Arthur! ❤️
Nice job!
Thanks Jessiebes!
Great job, very well done.
Thanks! ❤️
Wow! you need to get a media blaster. Nice job though.
Is everything I wanted hehe'
Thanks John! ❤️
Na hora que vi a esponja eu parei e pensei "epa, isso é BR" hehe muiti boa restauração!
Muito obrigado Ridi, eu sou brasileiro. ❤️
@@WorkshopDC Muito bom ter um brasileiro fazendo esse tipo de conteúdo! Já me inscrevi! Grande abraço
Muito obrigado pela ajuda Ridi! ❤️
It's a highly addictive video.
Thanks Metal! ❤️
cool job as always.like👍
Thanks!
Sweet 👍🏻 👍🏻
Thanks! ❤️
Caprichoso!
Muito obrigado Marcie! ❤️
Now, you just need a vintage key lock to complete the project.
A media blaster would cut the work in half.
In the furure I'll bought a sandblaster 😉
عمل جيد تستحق الايك
شكرا جزيلا!
The pink was very red, I would have liked seeing it a little more pastel XD
I really thinked in paint with pink but, some subscribers probably will hate me for that 😆😆😆
Belo trabalho, costumo fazer umas restaurações também, apesar de ser mais do Metal Wood.
Muito obrigado Fabriciu’s! Vou dar uma passada no seu canal qualquer dia! ❤️
Great job!!!
Thanks Colin! ❤️
Hydrochloric acid partly removes rust but also forms iron chloride that has the same problems. The best way to remove rust is to brush it with a wire brush that eliminates unstable crusts and then treat the remaining pitted rust (that was along all of the inside corners and edging of the tool box) with phosphoric acid. It's cheap and will last a long time.
I wire brushed all the parts before paint, but thanks for the tip. And thanks for Watching! ❤️
Nice, though I'm worried that you may haver thrown out these parts at 1:48. You never know, in 20 years you may be looking for a couple broken pieces of plastic identical to these and will regret not keeping them 😆
😆😆😆
Yep, you never know If some day you will need unkown pieces hehe'
But these ones I throw in the garbage.
Thanks Bro! ❤️
You were very brave as I would have left it as too far gone. Nice job.
Thanks Tony! ❤️
Removing the paint alone was really time consuming, nice restoration
Onde 1:
I don't know why but sometimes these box get awfully rusty by the time.
Correction: One 1...
Yep! This step took me some good time. Thanks One1!
@@aridemedina8770 maybe because the paint not good enough I think
Good job 👍 , see u on ur next Vlog ☺️ .
Thanks Mina! ❤️
Job well done, mate!!
Thanks Nightflyer! ❤️
😆oh～great's‼️
Thanks! ❤️
أنا مشترك جديد من العراق واحب اعمالك الرائعة
شكرا جزيلا لك!
@@WorkshopDC على الرحب
Me inscrevi no momento em que vi que tu é brasileiro. Cansado de ver só os gringos fazendo restaurações.
Muito obrigado Laydner! ❤️
What is that black material they put i the Box? Thanks for the super Video!
The material is Rubber. Thanks for Watching! ❤️
@@WorkshopDC can you please send me an amazon link? Thanks! :)
www.amazon.com/dp/B0972Z3J4Z/ref=mp_s_a_1_4?crid=32235LNKYWAXH&keywords=eva+1+cm+thick&qid=1647017242&sprefix=eva+1cm+thick%2Caps%2C217&sr=8-4
@@WorkshopDC thanks!🙂👍🏼💐
Tem uma idêntica a essa aqui em casa, mas na cor azul. E da mesma maneira necessitando de restauro.
Muito bom !
Obrigado Pérsio! ❤️
Great job mate. I fully enjoyed it. 👍🇦🇺
Thank you so much! ❤️
Seen a lot of undending left to do LOL Looks nice but it's not undending it's straightening ;)
Enjoyed your video and I gave it a Thumbs Up
Yep, but unfortunately i couldn't do most for some bend parts. Thanks oneshot!
Me: No way he can restore this
Workshop DC: Hold my tools
Thanks! 😆😆
Hey brother, not sure it's asmr, had to really crank the volume for any effect. My .02 cents :)
It turned out just fine as you mention in the description. Function over form!
Thanks Doc! Next time I'll make a better sound.
Класс..
Большое тебе спасибо.
@@WorkshopDC я сантехник...у меня тоже такой..
Эта коробка очень хороша.
perfeita a restauração, só achei o vídeo um pouco lento, poderia ser um pouco mais rápido!
I envy You all that time to spare.
Hehe' 😉
Com o uso os parafusos podem soltar. Talvez se colocar trava rosca ajude.
Sim, mas ela vai ficas parada na oficina, sem muito movimento. Eu não achei rebites para ela...
What was used for the lining at 12.00mins?
Rubber EVA
Excelente! Aqui tenho uma igualzinha, mas na cor azul.
Qual é o produto azul que você usa como "degreaser"?
Abraço
É o Sulopam, ele é muito bom pra uma limpeza profunda.
Obrigado Caio! ❤️
You did fair, I assume this project was probably one of your first. You get a C- .
Hello what strength acid did you use? Great project btw😎
Hydrochloric acid.
Thanks Laurence! ❤️
あまりに綺麗になりすぎ。ここは一つ日本人らしく、オリジナルの塗装を残し、錆味掠れヤツレを生かした伝世味のある再生にして頂きたかったなぁ。侘び寂びは日本の専売特許だから。
コメントありがとうございます！❤️🤗
👍🥃👏👍🥃👏👍🥃👏👍🥃👏👍🥃👏👍🥃👏👍🥃👏
for me it looks red, not pink
Yep, is red. I was kidding when I say pink 😆😆❤️
@@WorkshopDC Great! I was worried I am colour blind😁.
The title should probably say "rust-damaged" but I'm not entirely sure. Don't worry about it my native language is English and I still don't say it right all the time😂. Great content as always!
Thanks Matthew! I'll change. ♥️
@@WorkshopDC no problem man. Keep up the great work!
You are correct but hardly anyone uses a hypen properly anymore.
@@pfadiva That's a good point
nice job! check out our restorations too! thanks!
Thanks! ❤️
Help me..
With?
Muy chafa tú restauración, ponerle tornillo se observa horrible.
Gracias por ver.
Nice job. Well done.
Thanks Nico! ❤️