I love watching people do their magic and create things by hand. One day perhaps I’ll do it myself - I’ll have to visit “skill-share” first though . Amazing stuff!
Just watching this today made me realize how intelligent you really are. You see something and your mind just figures out how to do it better then it has been done already.
This build is super impressive. I've been contemplating building a pop top camper but I don't know how to weld. This has been very inspiring. The factory built units are crazy expensive.
DualX, thank you for sharing your process. I am soooo impressed with your skillful craftsmanship. I hope someone out there hires you to work with kids. It is so gratifying to see you take the initiative to create all manner of products. Good on you!!!
LMAO...buff Chance the Rapper does have a weightlifting channel. If you check his earlier content here on RUclips, this channel actually, you will see that he is New York State powerlifting champion.
I had to pause at the 6:17 mark. I'm glad you found your paint can trigger my man. Gotta keep them hands clean and tension free. Ok on to the rest of the video.
Awwww man, now this one is going to be wicked, I'm stoked once again to see the end results of this rooftop addition!🤔...I'm thinking it's going to be surprisingly great!
Man when do you even find the time to go camping with all these builds going on! This one is inspiring, never even considered building a RTT until now! Nice work man
few ideas 1. you should install a monitor/TV 40" that can unclip and swing down from the roof when is open , and now you have a workspace. 🖥🖥 you can run the power and HDMI through the cavities of the roof. 2. Also an LED RGB strip controlled by phone. (typ) 3. Make a drain on one side of the truck's bed rear corner to allow a pop up shower within the camper by flip back half of the sleeping bed since you now have enough space to stand on a corner. 4. Flipping back the sleeping bed transforming it to a couch
Great job innovating on this design. You are building almost exactly the clamshell I have been thinking of. It just makes sense to use aluminum and have a roof vent, skylight, etc. I can't wait to see what you do for the rest of the build.
I love this channel I love the stuff at this guys build but did anyone realise how are use the drills And the complete opposite way just thought I’d put it out good work mate keep it up
Hi there! I think you are doing a fantastic job of showing just enough of each technique and then moving on. You obviously care about your productions and how they land, so thank you for that and thank you for doing this project, because I think this is going to be my winter project on my Ram 1500, so I'm heavily invested in how it works out, and how the tent works out. I have a question for you for when all is said and done, and you have the finished product, and that is - 'Is there anything you would have done differently?' - Because I know whenever I finish a project there is always the thought, 'If only I would have...'. So thanks, awesome job.
Dualex, What ended up being the weight rating on the gas struts that you used on the frame for the wedge tent? I believe in the video, you said the original gas struts you were going to use were to stiff and you had to change them out for a set of gas struts that had a lower weight rating. Do you recall what the weight rating was on the struts you ultimately ended up using. Very enjoyable videos, great content and you have a great skill set. Semper Fi
Are you just going to have to manually lift the tent to pop it up? Because I'm sure a fairly cheap set of rear window support struts would be great. Just hit a release and boom, it pops up on it's own. Then folding it up would have a little resistance, but definitely manageable. I'm sure you've already thought of all of that though, you definitely know what you're doing. Great quality build so far again. This is only the 2nd or 3rd video of yours that I've watched (so far). ✌
I love watching people do their magic and create things by hand. One day perhaps I’ll do it myself - I’ll have to visit “skill-share” first though . Amazing stuff!
I wish I was a doer like you bro. My projects have to be way smaller than that. Lol. Glad I found you here.
Good luck in the competition
Just watching this today made me realize how intelligent you really are. You see something and your mind just figures out how to do it better then it has been done already.
You know its gonna be a good day when DualEx uploads a video, lets goooo!
Bruh I hve to give you credit, you are dang good at building .👍🏾
Love that brazing method. I always thought I'd need some high end welder to play with aluminum. Thanks for sharing
Doesn’t aluminum need gas to settle properly
i miss your vlog mah men , keep it up . I do love watching you
Love what your doing bro very inspirational
Watching this whole series. Thank you
You are so creative. Can't wait for the revile
Your skills are Amazing!!! I Love watching you! God Bless You.
Good on ya bro. From Australia 👍👍
This build is super impressive. I've been contemplating building a pop top camper but I don't know how to weld. This has been very inspiring. The factory built units are crazy expensive.
Hi Haxman! Stop watching other videos and make some more of your own. 🙏🏻🙏🏻🙏🏻😂😂😂
I bet you an amaaaazing shoutout, that you could learn to weld in under an hour! You are a smart man. 😄
@@JazzyGranny I appreciate the vote of confidence. 😁
Talented 100%
Looking forward to seeing your work
You're so intelligent. My goodness. Thank you for sharing.
This channel is great in every way.
Good luck @ Gutted!!!!!!!
You're killing it bro!
I've watched every build on RUclips I think ... you take it to a whole new level ! Top Notch bro keep em coming!
Oh the places you'll go and amazing adventures you'll have! Living the dream my guy!!
Good luck in Alamosa! Hope you get a chance to enjoy the sand dunes and local area.
What amazing talent brother. Wish you were my neighbor! God bless.
Good luck with the show!!!
Good luck at the event!!!!
I think I'm going to draw from this design quite a bit when I do my F150 lighting.
DualX, thank you for sharing your process. I am soooo impressed with your skillful craftsmanship. I hope someone out there hires you to work with kids. It is so gratifying to see you take the initiative to create all manner of products. Good on you!!!
I hope your channel keeps growing I've been following since 3k or 5k maybe earlier and the vibe is always there and we always learn something new
Your content is amazing! It’s so good to watch people do what they love. Lol btw you should have a weight lifting channel. My boy is jacked!
LMAO...buff Chance the Rapper does have a weightlifting channel. If you check his earlier content here on RUclips, this channel actually, you will see that he is New York State powerlifting champion.
Good job 💯🦾🦾🦾
You have mad skillz. Take the Joy Route.
I had to pause at the 6:17 mark. I'm glad you found your paint can trigger my man. Gotta keep them hands clean and tension free. Ok on to the rest of the video.
Can’t wait to see finished product I know it’s going to be great
I couldn’t do anything else my eyes were glued to this for some reason. Great work
Bro your channel is so insane it gives me chills how fast you do these projects and pump out these videos i hope u live an easy life
Hey Mr Melanin Hulk, can't wait to see the end result, keep doing you boo and will see you next week. 👍🏾👍🏾👍🏾
Your videos are excellent. Nice work.
Yo this is dope 🔥
I have no experience into this field but all of your videos have inspired me to learn! Love to see it
I love watching you build things!
Man I love your videos and the beat is nice....😎🥸
Good luck. Win!
Man you so good, you can talk all day for all I care👍
Really interesting. Looking forward to the next.
Awwww man, now this one is going to be wicked, I'm stoked once again to see the end results of this rooftop addition!🤔...I'm thinking it's going to be surprisingly great!
Think able to see a rooftop in camp with truck you theme so opinion make building great job at him 👍🏾👌🏾👏🏾👏🏾
Awesome build!
Thanks for the update! I was having withdrawal issues! 😆
That is very cool, I am currently trying to build a bootleg version of a Condor Roof Nest.
Looking forward to the next video.
Love this S%#&...... Again , well done and beautifully clean work .
I’m really glad I found your channel!
Sounds like the final video in this series is going to be epic!!!
You are brilliant🥰❤️
Awesome work
Nice new project.
Dope Build Bro!!
Dope stuff!! Excited to see how its gonna look when its done! 🙏🏼
I really want to get a van and do this. I think your channel is awesome, thank you for sharing your ideas
Amazing! You inspire me to challenge myself with new projects!
There's a real lesson in how you persist. You are an example for the ages.
Bro thanks for the video, though me some new skills.
Great job on the rooftop.
I've really been looking forward to this part of the build !! I'm building an off-road trailer my next step is the rooftop tent .
We have an old 1986 econo E350 ambulance and we need your help!! But would very much like to see you covert an ambulance!! Love your skill man
love the vids, keep it up
You are such an inspiration! You help me feel like I could actually do this! Thank you for all of your hard work!
I love it bro much love crazy ass builds fr
Man when do you even find the time to go camping with all these builds going on! This one is inspiring, never even considered building a RTT until now! Nice work man
And workout, I guess the joys of not having kids lol not that I’d have it any other way
Nice video. Good job.
You have me wanting to learn wood working
Bro I wish you were in Florida I would have you build my skoolie I mean you make it look easy I mean it’s almost hypnotizing
I had no idea you can weld like that! cant wait to see the final product man.
Hello, i love your work.
I do so enjoy how creative you are tee hee 😜lol
You do amazing work!! Now please wear your safety glasses!!
few ideas
1. you should install a monitor/TV 40" that can unclip and swing down from the roof when is open , and now you have a workspace. 🖥🖥 you can run the power and HDMI through the cavities of the roof.
2. Also an LED RGB strip controlled by phone. (typ)
3. Make a drain on one side of the truck's bed rear corner to allow a pop up shower within the camper by flip back half of the sleeping bed since you now have enough space to stand on a corner.
4. Flipping back the sleeping bed transforming it to a couch
Dude! Wow 👏🏻👏🏻👏🏻
Great job innovating on this design. You are building almost exactly the clamshell I have been thinking of. It just makes sense to use aluminum and have a roof vent, skylight, etc. I can't wait to see what you do for the rest of the build.
Go buy a coach bus and do a bus conversion! Let’s see real magic. ❤️ I love the videos, very talented.
Great stuff
Enjoyed it!
Was looking forward to this vid and the final build. Keep it up!
Love it.
I love your videos
First new vid since I subbed, was so excited to see! Binged many. Great work as always, looking forward to more
Time to see if SkillShare can get you a larger work space…lol. What you accomplish in that small work space is amazing. 👍
Excellent work!
(Hey, I recognize that saw.)
Digg'n the build here..
Can you do a how to when it comes to brazing aluminum?
I'm curious how strong it is...I know nothing about it
Incredible! It may not be your thing, but would love to see your take on a storage shed conversiom to an office.
Been waiting for this episode for a min 😂😂
I love this channel I love the stuff at this guys build but did anyone realise how are use the drills And the complete opposite way just thought I’d put it out good work mate keep it up
i love the pee bottle on the floor next to the Husky trash bags!
Can't wait to see it finished are you going to show how the canvas gets done for the tent?
Hi there! I think you are doing a fantastic job of showing just enough of each technique and then moving on. You obviously care about your productions and how they land, so thank you for that and thank you for doing this project, because I think this is going to be my winter project on my Ram 1500, so I'm heavily invested in how it works out, and how the tent works out. I have a question for you for when all is said and done, and you have the finished product, and that is - 'Is there anything you would have done differently?' - Because I know whenever I finish a project there is always the thought, 'If only I would have...'. So thanks, awesome job.
You’re going to be working with Alison and Eric from the Endless Adventure. You will definitely have fun with those two! Good luck.
Dualex,
What ended up being the weight rating on the gas struts that you used on the frame for the wedge tent? I believe in the video, you said the original gas struts you were going to use were to stiff and you had to change them out for a set of gas struts that had a lower weight rating. Do you recall what the weight rating was on the struts you ultimately ended up using. Very enjoyable videos, great content and you have a great skill set.
Semper Fi
Are you just going to have to manually lift the tent to pop it up? Because I'm sure a fairly cheap set of rear window support struts would be great. Just hit a release and boom, it pops up on it's own. Then folding it up would have a little resistance, but definitely manageable. I'm sure you've already thought of all of that though, you definitely know what you're doing. Great quality build so far again. This is only the 2nd or 3rd video of yours that I've watched (so far). ✌