@@somethingbutnot7217he have just buy a kit for build a mouse without the plastic, if you want you can project your personal pcb send it to pcbway chose the slavery option for solder the piece that you need on the pcb and then assemble it so its completally desined by you
What’s really cool is that this mouse comes for free with a certain brand of 3D printers. They give you the pcb and some other small parts and a link to the 3D files.
😊8😅99o🎉oi😂😅9😅89886l8o99😅999i9i896i😂998 Oil😅Pro 9@@MybeautifulandamazingPrincessUsk😅ilik8😢 98qilaman keyin 9879997i9 ol 9 oo9l Po Oli 5o999😅m3ik3😅hbudir oq 9 97979li8o🎉oʼz😅imi filmi 999 II😅99l😂Li😅i😮😂8🎉oyi
Jesus Christ formed Eve not out of the rib of Adam, instead he printed her with a Bambulab and Bambu Pla Matte Black filament 1.75mm -> get your facts straight
imagine being able to custom build your whole setup except the technology, the case, the mouse, the keyboard, the monitor, it'd literally be your setup
Ok how to 3D print a mouse read till the end 1: but a 3D printer that are super expensive 2: create the mouse parts on a computer 3: buy working pieces of the mouse 4: build it 5: test it 6: done Or 1: buy a mouse online and guess what you just saved your self thousands of dollars
3d printers aren't thousands of dollars. Well , some are, but you don't need one that expensive for this. You can get a high quality 3d printer for less than $1000.
In India ender 3 pro cost around 18000 - 25000inr that is just around 200-300$ And 3d printer mouse is what we can customise as we need If you don't have 3d printer they can be printed by placing order outside at very cheap price
@@davidlikestoprint What filament and print nozzle did you use? My stock settings on a P1S don't look anything like the upper shell here. I can't see layer lines or any of the expected artifacts on the top of your print.
@@Youngjackj I've printed more complex parts than that with zero support. Theres even a guy here on RUclips who does zero support 90° printing. Support material is wasteful, all you need is better management of your slicing software.
Because, the people want just "Print & Go" and BambuLab is particularly suitable for this. But hey, better than back then where many went with PVA, which is expensive support material. How to do to print smooth without support, requires a bit knownledge and experience.
That's so dope. Despite how cool this is, the whole time I was thinking to myself "plastic is so bad, and there are traces of micro plastic throughout the entire world".
Honestly i see the appeal, the amount of computer mice that break, wireless ones travel with you to meetings, home, your office, and it drops and breaks, being able to print a new plastic and keep the components that still work is great idea
It's depend on what you put inside. It can be insides from cheap China mouse or you can buy good parts. Also with skills 3d model can look like art. Seems you can use also expensive UF 3d printer.
i like how people are saying buying a mouse is cheaper than getting a 3d printer to make a mouse but this looks fun as hell, i wanna make this. (i did cause i have an x1 carbon and an a1 mini)
pc people when they find out their mouse is prebuilt:
Still prebuilt pcb board!
@@309electronics5by that logic we Should not buy ''prebuilt'' motherboards
@@309electronics5and a gpu is prebuilt from the factory, tf is ur point?
@@MrToastyYThahahahahahahaha
@@MrToastyYTPc people realizing that custom gpu they made themselves contains prebuilt atoms:
How to 3d print a mouse:
Step 1: buy a mouse
No Its only the pcb
Lol what of course you can't just print the internals
Step 1: buy a shitty mouse
Step 2: 3d print case and assemble
And then you have a normal mouse
@@somethingbutnot7217he have just buy a kit for build a mouse without the plastic, if you want you can project your personal pcb send it to pcbway chose the slavery option for solder the piece that you need on the pcb and then assemble it so its completally desined by you
@@somethingbutnot7217 still shitty lol
Friend: What kinda mouse you got?
Me: Yeezy Wireless
Underrated comment fr 💀
LMAO
This is underrated
🤣
Me:
"Searches for 3D printed clocks"
RUclips:
"Here's a video of a 3D printed mouse"
a example of ur luck
Yep🤣
@@UnknownEntityMXES
How@@AENY_2512
And if it breaks, just print spare parts! Smart idea of making a 3d printed mouse.
Its money tho
@@AjazVR3d print is cheap
@@AjazVR i mean he would only need like 1 or 2 spare parts.
3D print enthusiasts realizing their heart isn't 3D printed:
YET (context, they are 3d printing organs, even if it's not yet ready for medical use)
@@jani25654 oh thats true i forgot about that
From the moment I understood the weakness of my flesh, it disgusted me.
@@9767Music😂😂😂
the more we know
Jokes on you, I can 3d print myself a new one! A better one! A faster one!
Now I can just print myself a new mouse after a hard game of CS 2
That's a tantrum after a hard game of CS2
csgo player here
wanna play?
@@gameboyv1790 u say it to me ?
@@danulozabirko1628 yeah
Jokes aside, that mouse looks really cool
It's just a worse version of a Logitech G502
mid at best
Ya and probably feels awful.
@@daegan3505but be pretty lightweight tho lol
@@baconboy4058 most mouses weigh under 60grams nowadays anyway
Love the organic shapes, the mouse almost looks alive
What’s really cool is that this mouse comes for free with a certain brand of 3D printers. They give you the pcb and some other small parts and a link to the 3D files.
Good for when you rage on shooters. You break the mouse, and then you print another one
hahahahaha
Just don't throw at the monitor
24 hour cooldown
I will try this 😂😂
@@FoodSpicebyPriyanka just print a new one
Too bad it doesn't actually have a mouse click to it, looks awesome otherwise
Thank you 🙂
If you have those lever switches that home your 3d printer, they're similar to the ones in Logitech mice and have a satisfying click.
Doesn’t it function like a normal mouse?
@enriqueamaya3883I raped your sister
Nah silent click is the best
Green and black combo looks cool!
Razer
Yeah I like
Ye ye I love Razer😭😂
😊8😅99o🎉oi😂😅9😅89886l8o99😅999i9i896i😂998 Oil😅Pro 9@@MybeautifulandamazingPrincessUsk😅ilik8😢 98qilaman keyin 9879997i9 ol 9 oo9l Po Oli 5o999😅m3ik3😅hbudir oq 9 97979li8o🎉oʼz😅imi filmi 999 II😅99l😂Li😅i😮😂8🎉oyi
@@DuckAM_Officialrazer is trash and overrated ngl
david you're a genius!
he makes taking off the supports look so easy
Yeah, why do my supports never come off that easy ?
3d printed mouse: 😊
3d printed maus: 💀
average war thunder player trauma
I think its a World of tanks trauma😅😂😂
I want my 3d printed medicinal nuclear powered aircraft carrier
mouse on gremany is maus
3d printed mauser
Nah bro just invented China home edition
Chinized his mouse
What a beautiful quality of print ngl
@enriqueamaya3883 shut up
@enriqueamaya3883bro 💀
@-XenoCide15- jesus Christ is a 3d printer engineer now and he is the head developer of this printer bro
@enriqueamaya3883did you find Jesus in Fortnite or sum bruh🤡😭
Jesus Christ formed Eve not out of the rib of Adam, instead he printed her with a Bambulab and Bambu Pla Matte Black filament 1.75mm -> get your facts straight
Good work! Congratulation!
All Mouse manufacturing companies went bankrupt 😂❤
Using a glow in the dark resin + adding a led light will make this more awesome. ✨🤜
*filament (this is fdm, resin is for sla)
@@aeonjoey3d If you print it using resin.
Looks amazing!
Honestly I don’t see a lot of people do this good job 👏
Mom: "we have a gaming mouse at home"
*the gaming mouse at home*
nah cant beleive this actually worked might need to try it out for my self..
60% support 40% mouse
You know anything about printing? Those support are hollow and probably like 5 or 10% support.
Not to mention that it'll look 💩 without enough support
That looks so cool!
Too cool!
Yes I agree 💯
Now time to make this a build a computer mouse set
imagine being able to custom build your whole setup except the technology, the case, the mouse, the keyboard, the monitor, it'd literally be your setup
Welldone if you wanted to 3d print mouse and assemble it why don't you go with rechargable battery option!
That’s just what came with this! I plan to add glass skates and a rechargeable battery!🙂
This is a kit from bambu, pretty sure adding a rechargeable battery would be pretty trivial though
Facts rechargeable battery option
@@davidlikestoprint Hello, can you please give me the files for printing the mouse
That mouse’s design is so cool bro
It looks cool good job dude!
Ok how to 3D print a mouse read till the end
1: but a 3D printer that are super expensive
2: create the mouse parts on a computer
3: buy working pieces of the mouse
4: build it
5: test it
6: done
Or
1: buy a mouse online and guess what you just saved your self thousands of dollars
3d printers aren't thousands of dollars. Well , some are, but you don't need one that expensive for this. You can get a high quality 3d printer for less than $1000.
In India ender 3 pro cost around 18000 - 25000inr that is just around 200-300$
And 3d printer mouse is what we can customise as we need
If you don't have 3d printer they can be printed by placing order outside at very cheap price
We get 3d printed mice before GTA6
Bro is going to print a full pc next 💀💀💀
Fr dawg ☠️💀
What setting do you print on man your stiff comes out clean i have to out mine on silent mode to get quality like that lol
I printed this on the standard speeds at the stock settings
What material are you using?
@@davidlikestoprint What filament and print nozzle did you use? My stock settings on a P1S don't look anything like the upper shell here. I can't see layer lines or any of the expected artifacts on the top of your print.
I will never understand why people print something that doesn't need support, with support.
Well these are one of the kits with the new bamboo and I think it's already sliced
It definately needed support
@@Youngjackj I've printed more complex parts than that with zero support.
Theres even a guy here on RUclips who does zero support 90° printing.
Support material is wasteful, all you need is better management of your slicing software.
@@Duck_side and that compromises the finish, this is for a mouse. Part kd the design process is considering where its going to be used
Because, the people want just "Print & Go" and BambuLab is particularly suitable for this. But hey, better than back then where many went with PVA, which is expensive support material.
How to do to print smooth without support, requires a bit knownledge and experience.
That woogy woogy sound was epic😅
This guy is an engineer nobody would like my comment so I liked it
bro the mouse is so so good..
you can add some colourfull light inside the mouse
it will make the mouse toooooo cooler..
Is it strong enough to withstand exactly 30 hits against a wall
This actually very good anyone can design there own grip and textures fully customisable. Man you can start a company.😊
It's kit that you receive when you buy bambu lab A1. Everything is prepared you just print and assemble.
You should explore r/mousereview. People've been making much better, cooler and probably cheaper mice than this for a long time now
"Cool mouse bro where did you get it from, what brand?"
"Home-Made."
That's so dope. Despite how cool this is, the whole time I was thinking to myself "plastic is so bad, and there are traces of micro plastic throughout the entire world".
Nice, so we can decide on what color and material to print with!
what plastic did u use bro? Looks clean
Pla +
@@davidlikestoprint petg might have been better... Pla+ may start to crumble over time.
Im a new subscriber
"Wow what a nice mouse ever, where did you get it?"
"Uhm uhm.."
3:47 aku salah satu "korban" motivasi mu bang nelson 😄
where i can find this model pls?
Where can i find the 3d model?
Just search bambulab mouse stl
If you still need it i believe it's bambu labs' mouse, search for bambu labs mouse kit
vote for 3d printed keyboard
👇
3D printed keyboard next? 👀
@@davidlikestoprint yes please~
@@davidlikestoprintyesss
3d printed monitor later
Yesss
Bro took DIY to a whole new level
"Why did my mouse come dissembled?"
"Buy a mouse chip"
Thats honestly a really good idea. That way you can get a mouse perfectly fit for your hand
ugly as f
Very very nice.. I love the colors
Thank you so much 😊
Uuuuu vidi bosanca gleda engleze sto 3d printaju sve zivo😂😂 btw i ja sam bosanac
Who think this is cool
👇
Honestly i see the appeal, the amount of computer mice that break, wireless ones travel with you to meetings, home, your office, and it drops and breaks, being able to print a new plastic and keep the components that still work is great idea
Hayatımda izlediğim en kaliteli videolardan biriydi, Teşekkürler!
How cheap does it feel?
It's depend on what you put inside. It can be insides from cheap China mouse or you can buy good parts. Also with skills 3d model can look like art. Seems you can use also expensive UF 3d printer.
I’ll bet it feels cheap, but some captive weights in the 3D printed design could help with making it feel more premium.
I mean it’s a mouse that needs a battery it’s cheap asf lol
definitely cheap af
What the hell was the point if you were just going to scalp a store-bought Mouse for parts?
building a shell that you actually like?
it's a diy kit you can buy, he did not scalp anything
this child still think we can make mouse chip at home
@@mira8950Why are you writing in third person?
maybe he likes building stuff? what is ur point lol
Bro wish i had a 3D printer. The mouse is amazing good job! Ngl im kinda jealous btw try a keyboard next.
What are your support settings? Like what is your z distance and stuff
He makes it seem soooo easy I have to go through all kinds of troubleshooting errors
It's literally pushing 3 buttons to print.
What type of 3D printing is this? The finish looks incredibly smooth
By God that mouse looksss SOO COOL ...
Wow!!! I didn’t even think that using a 3D printer you could create such a cool thing!
"3D printed mouse vs real mouse, which is better? let's find out"
Those screws inside the mouse sounds like a mouse 😂😂😂
I like that colour comparison 👍
Friend - where do you get the mouse
Me - its homemade ☠️
that's actually dope
ver good bro i think you will come a good places
wow, a museum with a cool 3d printer
Cool now we just need a 3D printed monitor.
3D print enthusiasts realizing their stick isn't 3D printed:
"3D printed mouse"
*proceeds to buy the whole core of a mouse after printing**
*The pins on the cpu are pre-built.*
PC builders: Hold my beer.
My mouse when I meet an annoying team member:
This made my airpod break with bass... now I gotta put it in my case for a few minutes
This would actually be rlly fun as you could 3d print any mouse design and add any art you want
That’s a very creative way to make your custom mouse. Looks cool.
Seeing so much of these 3d printed content there's bound to be someone "3D Printed Waifu 🤯*
It would be nicer If the green was closer
That’s absolutely sick man, nice work!!
Thats something id actuslly buy
If that had leds bro that would look insane
If you break it, you can melt down the filament and reprint it.
I love that the design of the mouse resembles the 3D scaffolding! :]
Im pretty suprised that this little 3D printed chassis can fit a lot of technology
Awwww hell nah the ravagers took control of my homie mickey!
3d printed mouse video:❌
asmr video: ✅
aright we got an 3D mouse before GTA 6 😭😭
Bro just casually crafted a mouse from his inventory
Thats sick!!
it looks so good 👀
okay I've heard of building a PC but building a mouse, now thats just crazy
First time I’ve seen this print where I actually thought it was cool and I want to do it now too, nice video! I’m ordering the kit!!
i like how people are saying buying a mouse is cheaper than getting a 3d printer to make a mouse but this looks fun as hell, i wanna make this.
(i did cause i have an x1 carbon and an a1 mini)