Hi, I have a NN GD342B, all 3 door switches are good, magnetron measures < 0.5 Ohm terminal to terminal, terminal to chassis is 1k, inverter transistor is not shorted. What could be the problem? Transformer looks optically ok (core is not damaged like in video), eletrically I do not know. Primary winding measures < 0.5 Ohm, secondary measure open (although circuit is confusing with big diodes and capacitors), though I tried to measure directly at windings. Could transformer be the problem? EDIT: I checked, transformer seems good, both secondary windings are ok. After plugging in, microwave runs for 20 seconds (not heating), and then turns off with error H98. Thank you so much!
Min kung titignan mo po parang ok lang ang magnetron check mo maigi ang magnet baka may crack, pag may crack ang magnet lalabas yan h97, at pag sirah ang pangalawang door switch minsan h96
If you have same model microwave you can try transfer the PC board including the the digital display, if don't have extra you can try at shoppe or lazada,by simply type the model of your microwave and PC Board, thank you stay safe.
Hi, I have a NN GD342B, all 3 door switches are good, magnetron measures < 0.5 Ohm terminal to terminal, terminal to chassis is 1k, inverter transistor is not shorted. What could be the problem? Transformer looks optically ok (core is not damaged like in video), eletrically I do not know. Primary winding measures < 0.5 Ohm, secondary measure open (although circuit is confusing with big diodes and capacitors), though I tried to measure directly at windings. Could transformer be the problem? EDIT: I checked, transformer seems good, both secondary windings are ok.
After plugging in, microwave runs for 20 seconds (not heating), and then turns off with error H98. Thank you so much!
@@theIpatix magnetron terminal to chassis must be no reading, and you must check the capacitor sir
@@RSModifier Hi, I got a working new (used condition) Magnetron today and the microwave works flawlessly again! Thank you so much for your assistance!
@theIpatix good job sir, 👏
@theIpatix good job sir, 👏
galing mo kuya
Tq sir
What can cause H98 problem
Magnetron mag broken also the same if the door switch broken
I was about to warm up some food to eat and then this error happened. I’m so angry
Sad to hear that sir, just check the inverter and the magnetron magnet, thank you stay safe, God bless you and to your family
Sir Meron po b kayo repair shop ncr?
tq sir
Sorry po sa ibang po ako
Panasonic inverter, h97 , ok nman magnetron
Min kung titignan mo po parang ok lang ang magnetron check mo maigi ang magnet baka may crack, pag may crack ang magnet lalabas yan h97, at pag sirah ang pangalawang door switch minsan h96
H98 error din po microwave namin
Pa check mo po muna ang magnetron baka po may byak ang kanyang magnet po, at try nyo po hanapin sa online shopee or lazada
sir, my microwave inverter just led blinking
no display
model NN-ST65JB
Sorry for late reply sir, you need to change your PC board, but before you change PC board you need to check all 4 switches,
only led light blinking no display
If you have same model microwave you can try transfer the PC board including the the digital display, if don't have extra you can try at shoppe or lazada,by simply type the model of your microwave and PC Board, thank you stay safe.
please help me 🙏🙏🙏🙏🙏🙏
Sir microven.problem..3 second off..Panasonic plz replay...yea video
What is the model of your microwave sir? Brand, it is a inverter?