KOCH CHEMIE H9 HEAVY CUT AND M3 MICRO CUT PAINT CORRECTION
HTML-код
- Опубликовано: 20 окт 2024
- In this video we will demonstrate koch chime H9 & M3 we paint corrected this fender to see the results after and before paint correction by using koch chemie products
#kochcchemie #detailing #carwash #exellenceforexperts #imfinshvorn #paintcorrection 
Авто/Мото
Excellent video. I like the products as well. A little pricy but nice.
Amir Abdullah where are you from ?? We get it in a reasonable price here that product is great thank you for passing by
Royals Autospa I’m getting it from Texas and at $50 a liter it’s expensive IMO. I like it and the other stuff but car polishes have become costly as of late.
Amir Abdullah yeah i all depends in where you are getting it .. its sold in a reasonable price it our country the product is worth it
@@AmirAbdullah here in germany it is 40€ which is 48 dollars so i would say it isn´t that expensive in texas as it is a german product which needs to be shipped overseas. menzerna is also a good polishing compound while being a bit cheaper at 28€ per liter
Super ..brother my congratulations
شغل نضيف يعطيك الله العافيعه🤗
حسين القطان الله يعافيك 💛💛
يعطيك العافية .شغل عدل مو اي كلام
S.Jaffer Al-Mussawi الله يعافيك سيد ❤️❤️
nice work :)
M.F Hatip Carwellness thank you 😊
What do you think would be the best pads to use A microfibre cutting pad with h9 & Yellow rupes fine pad with M3 or the the specific Koch Chemie pads? Thanks
A microfiber cutting pad will work great, or any of the pads you mentioned
CIVIC EG!!!!! 😍😍😍
والله ابداع
Hello, thank you. Did you apply lots of pressure on the DA?
UTubeViewer2009 hello sir not much pressure but medium hand movement not fast neither slow ... thank you for paasing by our channel
Whats pads are them please very nice 👌
Which one is better h8 or h9 ?
Hussnain Naqvi bothe are good but h9 is the new version so it has a better cutting ability but still h8 does the job perfectly you will notice the slight difference when you work the products .. thank you for passing by my channel
H9 a good one step on hard and medium clear coat?
hakman239 yes it is a good one step step when you combine it with the red pad it works great on hard and medium clear coat on my second video i did it on mercedes which is hard clear coat
Thanks for passing by my video
Royals Autospa does it remove all the defects on hard paint then? As a one step
hakman239 yes it does when its used the proper way it has a great cutting ability and a decent gloss
Shouldn't you prime the pad first?
Hello dear
Primed it while working aka priming on the fly ... it got primed as i was spreading the polish at low speed
Thanks for passing by my channel
Nice gloss! is that a Rupes Mille?
Hello jay thanks for passing by 🙏🙏 nop its a rupes mini
@@royalsautospa5271 nice work.
@@royalsautospa5271 Looks like a Rupes Duetto.
@@andrewkostylev sorry it not a mark 3 its a rupes mini
What name of firs pad for koch 9?
Koch chemie heavy cut pad 😍😍 thanks for passing by my channel
@@royalsautospa5271 can it be used by pad not with machine?
What pad for f6 then same rupes yellow
hakman239 hello sir F6 is used mostly with the yellow fine pad of koch chemie or you can use it with wool pad to remove defects and the use a yellow pad from rupes or purple pad from koch chemie with M3 for perfect result thank you for passing by
This is a great video to demonstrate how NOT to use a polisher
Because the video was fast forwarded?
Hello dear .. can i know the reason ??
@@PumaM90 it wasn’t fast forwarded at all points and should have been going very slow when it was turn faster speed or you don’t achieve anything
I fast forwarded the video so it doesn’t get boring next vid i wont fast forward
@@royalsautospa5271 not on all the video you didn’t I watched it twice
No disrespect, but does somebody out there not think we have enough people showing the same thing over and over again. Come on man if you're in the business you know what you like and what you use, and if you're not there's way too many guys doing the same over and over again, and everyone's got the same story I'm over it.👎
You are moving the machine to fast
The Predator
Hello sir thank for passing by the video is fast forwarded so it doesn’t get boring
@@royalsautospa5271 aha ok sorry men
The results is mashaAllah 👌
Who cares what speed he is moving it if it gets results.
His fingers creepes the fuck out of me 😂 wtf man
jr.design thank for passing by ... whats wrong with the fingers
Jézusom