The type you viewed at around 2:43 is the type I use all the time at the base of downpipes! The insert makes for easy cleaning and also prevent debris build up in soakaways!
Thanks to your video, I now have an answer to how my bottle gully actually works as I didn't understand why there was a rubber plug when I couldn't see any means for the waste to escape. Thanks very much for posting this video.
Nice video. I have two 40mm waste pipes feeding one square gully hopper. Are there any recommendations for how best to feed the piped into the gully, such as a dual grid?
Great video. If connecting two osma gully traps together, do you still use the 87.5 deg outlet on the first one and connect this to one of the straight inlets on the trap that is also the one that discharges to the sewer. How do you cope with the fact that the first pipe discharges at an angle but the second inlet is horizontal? The distance between my two traps is about 800mm. Thank you
Can the P Trap gully be used under your kitchen floor? My builder is about to use them and I'm concerned I may not be able to unblock them if they get blocked.
Hi what type of trap would use to connect Ako drains that are around a bay window into a nearby drain. There are two drains nearby and both have gullies, could I connect the new drains to one of the existing gullies?
Good video. Thank you for the information, invaluable. Sorry no sales as I live in New Zealand! But I appreciate your efforts. In a limited height situation, with flat land leading to a soak pit , which option is the best option? Cheers Philip
For a new build, I presume I'd use a bottle gully for the surface water from down pipes or is this wrong because someone can still tip a bucket of detergent down it? Also, what is best to use for the kitchen sink into the foul connection, would it be a P trap or a bottle gully?
I have a tick shaped/ 45 degree upward gulley which the Bath and basin water goes into then straight to the septic tank. I know there’s no blockages but can work out why the Bath water is overwhelming it, causing it to overflow. Can anyone help?
Yes! I use the type with the removable insert! It allows for easy cleaning/maintenance and prevents collected debris going into and eventually clogging the soakaway. You can purchase them with a split grill so you don't have to remove the downpipe; just the grill situated over the insert!
many builders put the p trap and put cheap one in or their no common sense , u not have to be a builder to have common sense , the builders do this should be shamed on internet
Too much accent? You sure youre not deaf? If you cant undrrstand him, dont ever go to Liverpool, Birmingham, Bristol, Yorkshire, Northumberland, Glasgow, etc, etc. You should get out more.
@@gbwildlifeuk8269 Brother, I am Indian and never been to UK... I am an Architect and once I had to discuss something with an Irish Man in Dubai for a Multiplex.... It was very difficult for me to comprehend what he said.... For example when he said "Floor"... It sounded like "Flower"...... Like he said "Saoo whaat kinda Grout shall I put on the Flower"... 😂😂😂.... I was flabbergasted.. Who puts Grout on a Flower? ... And where are the FLOWERS on the plans!???.... 🤣🤣🤣.... I am not used to such accents.... Sorry.. May be it is our (Indian) problem... Cheers 🙏
The type you viewed at around 2:43 is the type I use all the time at the base of downpipes! The insert makes for easy cleaning and also prevent debris build up in soakaways!
Thank you, this video just changed my drainage plans. I'll check out you website
Thanks to your video, I now have an answer to how my bottle gully actually works as I didn't understand why there was a rubber plug when I couldn't see any means for the waste to escape. Thanks very much for posting this video.
Very informative , saved me a load of hassle and money. cheers
Thanks my clay U sharp gully just cracked and leaking water your video gave me more info what I can replace it with 👍🏼
You're a life saver, thanks for this video
Thank you for this extremely clear explanation!
thanks for taking the time very informative videos i shall be making a purchase soon
Thanks for this video! Very useful!
The most helpful video ever !
Lovely stuff, thanks
Good explanation.
Extremely useful. Thank you. I only wish I'd found this before installing a bottle gully that isn't roddable!
Great video for an novice like me. Cheers!
Nice video. I have two 40mm waste pipes feeding one square gully hopper. Are there any recommendations for how best to feed the piped into the gully, such as a dual grid?
Thanks - great video
Great video. If connecting two osma gully traps together, do you still use the 87.5 deg outlet on the first one and connect this to one of the straight inlets on the trap that is also the one that discharges to the sewer. How do you cope with the fact that the first pipe discharges at an angle but the second inlet is horizontal? The distance between my two traps is about 800mm. Thank you
Excellent RUclips. Thank-you. 👍
Great vid, very informative, thank you 👍
Cheers just what i was looking for
Very helpful video thanks appreciate that 👍
Another excellent vid. Thanks
Can the P Trap gully be used under your kitchen floor?
My builder is about to use them and I'm concerned I may not be able to unblock them if they get blocked.
Hi great video.. is replaceing a Gully a DIY job. mine has a crack in and doesnt hold water any more. could I replace it my self?
Hi what type of trap would use to connect Ako drains that are around a bay window into a nearby drain. There are two drains nearby and both have gullies, could I connect the new drains to one of the existing gullies?
How does the water flow upwards past the trap on both of the pea traps without pressure or a pump?
Gravity and weight. The water flowing in will push the water in the trap out.
Good video. Thank you for the information, invaluable. Sorry no sales as I live in New Zealand! But I appreciate your efforts. In a limited height situation, with flat land leading to a soak pit , which option is the best option? Cheers Philip
Good man, saved me a lot of ****ing about, and a few quid too, ta.
For a new build, I presume I'd use a bottle gully for the surface water from down pipes or is this wrong because someone can still tip a bucket of detergent down it?
Also, what is best to use for the kitchen sink into the foul connection, would it be a P trap or a bottle gully?
Can you use bottle gullys on down pipes (rain water) and on kitchen sink waste.or do I have to use Square gullies on the kitchen waste ????
saving my "i didn't focus through building services class" ass
Please. Make. a. Video. On. NAHANI. TRAP. ( FLOOR. TRAP ) .
Hi which one do I need to connect aco drains into
Cheers
IF YOU MEAN CHANNEL DRAINS THEY CAN HAVE THEIR OWN INLINE SUMP
I think you did that without as single cut (edit) impressive
What would you lay the p trap on ??
Thanks very much.
Thank you for the video
I have a tick shaped/ 45 degree upward gulley which the Bath and basin water goes into then straight to the septic tank. I know there’s no blockages but can work out why the Bath water is overwhelming it, causing it to overflow. Can anyone help?
I used to make these out o clay in the 80s
thanks - A good lesson
Back in let guly does it need seal,
Would you use one of these for gutter watter going to a soakaway
Yes! I use the type with the removable insert! It allows for easy cleaning/maintenance and prevents collected debris going into and eventually clogging the soakaway. You can purchase them with a split grill so you don't have to remove the downpipe; just the grill situated over the insert!
Can I use bottle gully to joint the toilet pipe coz soil pipe is too far and I have clay gully will replace with bottle one please reply
No
good product
do you need to vent a gully trap?
Q: why are there two types of hopper?
horse1066 The rectangular one lets you join more pipes into it. The round holes in the sides are there so you can join downpipes into them.
Thank you
Can I use this for a new sh** pipe?
many builders put the p trap and put cheap one in or their no common sense , u not have to be a builder to have common sense , the builders do this should be shamed on internet
Drake is the best
i person couldn't hack it
Tooooo much accent .. cant understand you
Too much accent? You sure youre not deaf? If you cant undrrstand him, dont ever go to Liverpool, Birmingham, Bristol, Yorkshire, Northumberland, Glasgow, etc, etc. You should get out more.
@@gbwildlifeuk8269
Brother, I am Indian and never been to UK... I am an Architect and once I had to discuss something with an Irish Man in Dubai for a Multiplex.... It was very difficult for me to comprehend what he said.... For example when he said "Floor"... It sounded like "Flower"...... Like he said "Saoo whaat kinda Grout shall I put on the Flower"... 😂😂😂.... I was flabbergasted.. Who puts Grout on a Flower? ... And where are the FLOWERS on the plans!???.... 🤣🤣🤣.... I am not used to such accents.... Sorry.. May be it is our (Indian) problem... Cheers 🙏
@@awhig2474 now you know how it feels when we phone up a company and you twats answer our call in some shitty call centre in India.
@@awhig2474 hahahahahaha