I've walked into model stores with a lot of Gundam models to choose from and yours are by far the most gorgeous to watch and maybe one day to own. Your detail and touch on each model should be the standard when buying a model.
There is no line this guy won’t make.. I’d be so nervous to scribe something fine that close to the edge because “there’s no room to work with” You just go for it, wow!!
I started scribing because of you. I've mastered the .2mm. My lines are consistent and neat and are beginning to look like yours. But I've started integrating use of the .4mm and now I've got to start all over again. XD So much practice required! But it's worth it. By the way, for those watching, scribing takes a looooooong time. Especially when staring at the blank piece of plastic trying to envision lines. Sometimes I end up staring at a piece for an hour trying to come up with something. Thanks RAVI, for being an inspiration.
panel line is requires skill, but it is more difficult to come up with a design. I try sketching parts several times. Until I have a design that I like.
I have seen so many WIP videos for many years now. Your work is amazing, professional and totally the next level. You really motivates us all. Keep up the good work.
how do you come up with these panel lines? are you using other customs for reference or just thinking of them on the spot? i've been wanting to do this myself but a bit afraid of messing up a kit over it
Sorry for asking so much? Is primer painting the parts essential before scribbing? Is it so you can draw the parts with pencil? Is it different if im using 6mm hiqparts guide tape? Im planning to scribb my 1/144 btw..
Not essential. When I sand the parts, I want to check the shrinkage on the surface. There are two types of HIQPARTS guide tape: 3mm and 6mm. I usually use 3mm.
If you built a kit straight out of the box with absolutely no modifications, how long would it take you vs. one you would modify? And what is the clear tape you use to scribe with? Thanks in advance.
How do you decide what lines to add and the customization you do? Do you make a design plan for each piece to go together in the end, of work piece by piece?
Absolutely superb modeling! Where can I get that clear tape you are using as a scribing guide, it is like Dymo label tape? It seems better to work with.
What chisel set are you using and where did you purchase them? What clear tape are you using? What type of putty? I'm just amazed at your skills! Any info would be very appreciated!!!
영상 잘봤습니다~ rg사자비로 따라해봤다가 이게 패널라인인지 웨더링인지 구분 못하는 지경까지 갔네요 ㅎㅎ 유튭프리미엄까지 결재해서 광고없이 수십번을 봤는데 결코 쉽게 따라할수없는 테크닉이었다는것만 처절히 느꼈습니다ㅠ 애초에 쉽게 생각하지도 않았지만 ㅎㅎ 좋은 영상 감사합니다~❤️👍
Sand with sandpaper if depth is not deep, apply instant glue if depth is deep And when the glue is firm, grind it flat with sandpaper. Watch this video about the tape. ruclips.net/video/uhy1AwiMbrU/видео.html It's from 6:39
일정이 바빠서 업로드가 늦었습니다ㅠ 작업은 먼저 완료했는데 편집이 늦었네요. 시청해주셔서 감사합니다 ^^ The upload was late because of the busy schedule.😭 The operation was completed first, but video editing was delayed. Thanks for watching. 😀
Your work is absolutely beautiful, so much that it makes me wonder why I’m bothering even building a kit to begin with 😂. I notice that you only use manual hand tools to work on the pieces aside from your airbrush of course, I wonder why it is you don’t tend to use an electric rotary tool? I’m currently working on a Gouf custom from 02 and the pieces fit together like absolute shit even after I clean them up carefully, any advice?
I have a question: which chisels sizes do you own and which do you use the most? I have 0.15 and 0.2 for basic lines, but I'm considering some for the larger notch details. Thank you for your videos, I enjoy them all!
Hello, I really love your work. I wanna start in the Gunpla world, so I have this question: What is or where do you buy the white plastic you're using? Can it be bought at Amazon?
Wow wow wow! The work you did with the magic sculpt is awesome. So clean and perfect. I use Milliput and I cannot use chisel on milliput because it breaks easily! That Magic sculpt instead is perfect. I will buy it for sure! Question! What do you do when the chisels are not sharp anymore? Is there a way to make it sharp again manually?
@@RAVIPLA I'm happy because I have the BMC chisels too. So I know they will last a lot! But I have also a few Wave chisels and one already lost its sharpness!
damn watched a couple of your video's on the sazabi and it's some damn impressive work, i'd attempt it if i weren't so damn twitchy...also i believe the taping before the scribing would drive me utterly insane trying to get things to line up perfectly. also got no kit i'm willing to mangle to attempt it, still want to paint my sinanju in high gloss but afraid i'll mess it up and ruin him. perhaps if they some day bless us with a mg kshatriya i'll experiment on the HG
Hey man, just wanna say your vids have made me started to experiment with custom panel lines and details and your step by step tutorials are incredibly helpful. Where did you get the larger chisels though cause I can't find one specific to plastic models. Are those chisels used for wood?
Hi Ravi, thanks for the great tutorial again! Really fascinating design! But I have a question here. How do you decide when to use 0.15 or 0.2 and 0.4 or 0.5? Because I feel that they only make a small difference visually. Thanks a lot!
Generally, 0.5 is used mainly. However, if the panel area is small, use 0.4. 0.15 and 0.2 don't mean much. mg sazabi is large and usually uses 0.2 but uses 0.15 when the parts are small. Generally, 0.15 is mainly used for 1/100 scale. Thanks.
◼︎ 제작의뢰 및 완성작 구매 문의 (Commission & Purchase Inquiry)
jackers7@naver.com or instagram DM (ravi_pla)
Notice - blog.naver.com/jackers7/222348230829
Best Gunpla Detailing On RUclips🗽
Thanks 😄
agreed
I've walked into model stores with a lot of Gundam models to choose from and yours are by far the most gorgeous to watch and maybe one day to own. Your detail and touch on each model should be the standard when buying a model.
This guy is a gunpla surgeon, the precision and skill is machine like.
His changes are so amazing, I would love to see the mobile suite when it’s all put together.
Your videos has taught me that I shouldn’t be afraid to experiment more with bigger changes to the models I’m working on!
Did you ever hear the story of darth plagueis the wise... I thought not
There is no line this guy won’t make.. I’d be so nervous to scribe something fine that close to the edge because “there’s no room to work with”
You just go for it, wow!!
I started scribing because of you. I've mastered the .2mm. My lines are consistent and neat and are beginning to look like yours. But I've started integrating use of the .4mm and now I've got to start all over again. XD
So much practice required! But it's worth it. By the way, for those watching, scribing takes a looooooong time. Especially when staring at the blank piece of plastic trying to envision lines. Sometimes I end up staring at a piece for an hour trying to come up with something.
Thanks RAVI, for being an inspiration.
panel line is requires skill, but it is more difficult to come up with a design. I try sketching parts several times. Until I have a design that I like.
역시 장인정신 으로 한땀한땀 정성들여서
만드는 작업 이네요.
전 HGUC 등급 퍼스트건담부터 시작해서 붓도색에 데칼작업 하고 LED 작업하고 있습니다.
led 작업하니까 너무 멋지네요~ 영상 잘봤습니다^^
@@RAVIPLA 감사합니다.
제가 더 좋은작품 볼수 있어서 감사합니다ㆍ
작업 하시는데 수고 많으셨습니다.
This videos are the reason im starting gunpla. I love just how beautiful and skilled these turn out. I cant wait to see the finished model.
Very detailed work!! excellent!!! is that scotch tape you use as a guide? or what?
I have seen so many WIP videos for many years now. Your work is amazing, professional and totally the next level. You really motivates us all. Keep up the good work.
Thanks for the compliment :D
how do you come up with these panel lines? are you using other customs for reference or just thinking of them on the spot? i've been wanting to do this myself but a bit afraid of messing up a kit over it
just get yourself some flat sheets of pla plate and practice on there for awhile. Even drawing your panels on paper can help, but good luck!
it's truly mesmerizing and completly astonishing.
This sazabi will be a masterpiece for sure.
Thanks for all the praise. :D
Great job as always. Your work is inspiring and has taught a lot of the beginners like us. 👍🏻
I'm glad I can help you. Thanks :D
The great artist with godskill 🧑🏻🚀
All your work is spectacular. I watch your videos to relax, it's very peaceful and super satisfying to watch.
그냥 넘사벽 입니다...
과찬이세요 ㅎ 좋게 봐주셔서 감사합니다 ^^
Some of these custom builds are crazy awesome
Ultimate respect from ENGLAND. MAXIMUM WINNING.
Thank you so much ! :D
Sorry for asking so much?
Is primer painting the parts essential before scribbing? Is it so you can draw the parts with pencil?
Is it different if im using 6mm hiqparts guide tape?
Im planning to scribb my 1/144 btw..
Not essential. When I sand the parts, I want to check the shrinkage on the surface.
There are two types of HIQPARTS guide tape: 3mm and 6mm. I usually use 3mm.
Absolutely stunning craftsmanship! your level of detail is off the charts....
Thank you so much :D
Damn. This is incredibly impressive. Hat's off to you.
Thank you so much :)
If you built a kit straight out of the box with absolutely no modifications, how long would it take you vs. one you would modify? And what is the clear tape you use to scribe with? Thanks in advance.
I love watching people that are very creative and talented and share that with others.
Thank you for sharing :D
excellent tutorial in more details than others
Thanks :D
How do you decide what lines to add and the customization you do? Do you make a design plan for each piece to go together in the end, of work piece by piece?
Why is this guy not a Sujiburido ambassador yet?! Great work as always!
Thanks 😄
I need to see the end result...every panel is a masterpiece 👍🏼
Absolutely superb modeling! Where can I get that clear tape you are using as a scribing guide, it is like Dymo label tape? It seems better to work with.
I'm inspired by this and hope to be able to do this level of art one day....so amazing!!
很抱歉用中文留言，但看每個您刻線的細緻度，真的非常厲害！
您真的非常厲害！都想跟您拜師了....
謝謝
how do you stick pla-plate on the model? what glue did you use?
Such beautiful detail work, you are very skilled!
By far the best gunpla channel I've found on detailing!
Keep up the amazing work!
Thank you so much :D
와 미쳤다 뭐지 하면서 봤어요 진짜 대단하세요 늦은 새벽에 잠못자고 보고갑니다 괴물 덜덜
The big big chisel with the wood handle ? Is it expensive ? Or just regular one .
Search for MIKISYO on Google.
Oh cool ,
What chisel set are you using and where did you purchase them? What clear tape are you using? What type of putty? I'm just amazed at your skills! Any info would be very appreciated!!!
햐... 늘 드는 생각이지만 아름답다고 느껴질 정도입니다.
그렇게 봐주시니 기분좋네요 ㅠ 감사합니다 ~! ^^
영상 잘봤습니다~ rg사자비로 따라해봤다가 이게 패널라인인지 웨더링인지 구분 못하는 지경까지 갔네요 ㅎㅎ
유튭프리미엄까지 결재해서 광고없이 수십번을 봤는데 결코 쉽게 따라할수없는 테크닉이었다는것만 처절히 느꼈습니다ㅠ 애초에 쉽게 생각하지도 않았지만 ㅎㅎ
좋은 영상 감사합니다~❤️👍
관심을 가지고 봐주셔서 감사해요^^
이야... 그냥 말이안나오네요...
Sazabi Ver. RAVI 발매일과 발매가 꼭 알려주세요!!! 반다이 보고있나~
Bandai should recruit Ravi for the Ver. RAVI limited editions!
좋게 봐주셔서 감사합니다 ^^
Would happily buy such versions, especially of Sazabi here, or Kshatyria as both of them are my favorite Zeon (ish) Mobile Suits
You make this look so easy! What happens when you make a mistake with the chisel ? And is that just normal tape you are using or something else?
He's using HIQ guiding tape.
Sand with sandpaper if depth is not deep, apply instant glue if depth is deep And when the glue is firm, grind it flat with sandpaper.
Watch this video about the tape. ruclips.net/video/uhy1AwiMbrU/видео.html It's from 6:39
일정이 바빠서 업로드가 늦었습니다ㅠ 작업은 먼저 완료했는데 편집이 늦었네요.
시청해주셔서 감사합니다 ^^
The upload was late because of the busy schedule.😭 The operation was completed first, but video editing was delayed.
Thanks for watching. 😀
No sweat brother, take your time
Thanks bro 😄
@@RAVIPLA This is amazing Sazabi Ver. RA , after you complete this project i hope to see nu gundam Ver. RA next to Sazabi. It will be great. 😃😃😃
방에 있던 프라모델이 플라스틱 덩어리로 보이는데 어떻게 하죠 책임지세요...ㅠ
I am absolutely amazed BEYOND words! You are amazing! I wish I have the time and skills to do what you do.
Do you randomly place lines or do you plan placement?
What big chisel did you use? Regular woodworking chisel?
Search for MIKISYO on Google.
Your work is absolutely beautiful, so much that it makes me wonder why I’m bothering even building a kit to begin with 😂. I notice that you only use manual hand tools to work on the pieces aside from your airbrush of course, I wonder why it is you don’t tend to use an electric rotary tool? I’m currently working on a Gouf custom from 02 and the pieces fit together like absolute shit even after I clean them up carefully, any advice?
수많은 사자비 작품 봤지만 이게 젤 기대됩니다!!
감사합니다 ^^ 열심히 만들어 보겠습니다^^
the horn lengthening is really incredible, how could the alignment be so accurate
Attach it in the center as much as possible, and sand it until it is straight.
Penis Enlargement
I have a question: which chisels sizes do you own and which do you use the most? I have 0.15 and 0.2 for basic lines, but I'm considering some for the larger notch details. Thank you for your videos, I enjoy them all!
I use 0.125 and 0.15 for HG. 0.15 and 0.2 for MG.
Hello, I really love your work. I wanna start in the Gunpla world, so I have this question: What is or where do you buy the white plastic you're using? Can it be bought at Amazon?
작업하고나온 분진이나가루들은 어떻게청소하시나용?
가루를 페인트붓으로 쓸어모아서 소형 핸디청소기로 치우거나 가루가 많이 떨어지는 작업(주로 퍼티샌딩)을 할때는 물티슈를 바닥에 깔고 물티슈 위로 가루가 떨어지게 작업합니다 ^^
저같이 속 좁은 사람은 심장이 벌렁거려서 RAVI PLA님과 같은 패널라인 작업을 못한다에 올인! ㅠ.ㅠ
정크파츠에 맘편하게 시도해보세요 ㅎ
How do you even come up with those panel lines and added putty sculpt?!
what brand of chisels do you use? Is it possible to know which gear brands you use for your work?
Please watch this video. ruclips.net/video/uhy1AwiMbrU/видео.html from 0:55
I seldom comment on youtube videos. This is beyond 9000 power!
Thanks for watching.
@@RAVIPLA can we get to see the full complete sazabi?
Of course.
Exquisite work... what's the brand of the larger width chisels, the one with wooden handles if u dont mind me asking...
Thanks. Search for MIKISYO on Google.
Wow wow wow! The work you did with the magic sculpt is awesome. So clean and perfect. I use Milliput and I cannot use chisel on milliput because it breaks easily!
That Magic sculpt instead is perfect. I will buy it for sure!
Question! What do you do when the chisels are not sharp anymore? Is there a way to make it sharp again manually?
I have never done anything else to sharpen my chisel. I've been using it for years, but it's still sharp enough.
@@RAVIPLA I'm happy because I have the BMC chisels too. So I know they will last a lot!
But I have also a few Wave chisels and one already lost its sharpness!
I literally cannot wait to see it finished!
I'll do my best :D
What primer do you use?
우와~ 이건 멋지다 이쁘다 정도가 아니라 경이롭다가 어울리네요
그렇게 봐주셔서 감사합니다 ^^
How many passes with the chisel when scribing the line?
There is no standard. I Scribing until the line is clear.
What's that clear tape you use to guide the chisel?
What size are the power grip carving tools you use? Thank you great videos
Use 3mm and 4.5mm mainly.
아 진짜 넘사벽이다;;;;감탄만하다 갑니다!!!!
매번 좋게 봐주셔서 감사합니다 ^^
How do you plan your custom details/scribing?
I'm sorry, I watch your videos many times, and still don't understand why you painted it light gray first. Is that a method of something?
와...진짜 디테일 미쳤다...실력 장난 아니시네;
좋게 봐주셔서 감사합니다 ^^
Unreal precision!
Ravi u the best bro👊👊👊👊
Fadly Fadlan Thanks bro 😁 👊👊👊👊
Great work as always! Can't wait to see the end result of the kit.
Thanks :D
senpai.. would you share or recommendation the scale of chisel did you use?? for 1/114 and 1/100 kit
1/144 : 0.1 ~ 0.15 1/100 - 0.15, 0.2
눈만높아져 큰일이다....기가막힙니다 정말ㅋㅋ
좋게 봐주셔서 감사합니다 ^^
Where can i buy those awesome chisel???
damn watched a couple of your video's on the sazabi and it's some damn impressive work, i'd attempt it if i weren't so damn twitchy...also i believe the taping before the scribing would drive me utterly insane trying to get things to line up perfectly. also got no kit i'm willing to mangle to attempt it, still want to paint my sinanju in high gloss but afraid i'll mess it up and ruin him. perhaps if they some day bless us with a mg kshatriya i'll experiment on the HG
Thanks. Try practicing on spare parts before trying. Then you will be confident enough.
Hey man, just wanna say your vids have made me started to experiment with custom panel lines and details and your step by step tutorials are incredibly helpful. Where did you get the larger chisels though cause I can't find one specific to plastic models. Are those chisels used for wood?
Thanks. Search for MIKISYO on Google.
@@RAVIPLA Thanks a lot man! Found them!
Super pro level...ur amazing.... Very good!!
Thanks :)
캬~~역시 라비님! 페널라인의 신!! 잘 봤습니다!
과찬이세요 ㅠ 좋게 봐주셔서 감사합니다 ^^
How many hours were put into all this so far?
I couldn't check the time. Because I worked little by little whenever I had free time.
awesome detailing as always, its coming along nicely -
Thanks :D
Which gundam series is this from
뿔에서 이미 게임 끝인듯 정말 멋지네요
좋게 봐주셔서 감사합니다 ^^
전부 완성한거 보면 대박일듯요
완성작이 잘나와야 할 텐데...감사합니다 ^^
Hi Ravi, thanks for the great tutorial again! Really fascinating design! But I have a question here. How do you decide when to use 0.15 or 0.2 and 0.4 or 0.5? Because I feel that they only make a small difference visually. Thanks a lot!
Generally, 0.5 is used mainly. However, if the panel area is small, use 0.4. 0.15 and 0.2 don't mean much. mg sazabi is large and usually uses 0.2 but uses 0.15 when the parts are small. Generally, 0.15 is mainly used for 1/100 scale. Thanks.
RAVI PLA Thank you so much for the answer! I'll definitely keep that in mind! 😊
I Learn so much in such a short video, thank you.
Thanks for watching. :D
Very nice work.
I always bloody slip doing this, or the tape moves, or something else that results in a crappy scratch on my kit. :(
Still the best 😊 Well done mate! 👍
Thanks always. 😄
미닐 테이프는 정체가 뭐죠? 패널라인 용도로 나온 물건익나요? 그냥 아이디어로 만드신건가요?
패널라인 가이드 테이프 입니다. ruclips.net/video/uhy1AwiMbrU/видео.html 6분 39초부터 나옵니다.
완성작 기대도 기대됩니다...대단하심 볼때마다.
저거 의뢰하면 혼나겠죠???ㅋㅋ
똑같이 만들수는 있지만 질려서 못만들거 같아요 ㅎㅎ 좋게 봐주셔서 감사합니다 ^^
언제봐도 이쁜.. 킷이군요.. 전 아직 초보라. 엄두도 못내는데..ㅠㅠ
사자비는 참 잘나온 킷 같습니다 ㅎ 영상 보시면서 하나씩 시도해보세요^^
nice and superb video
Hey what's the name of the glue with the syringe at the top? I need a precise glue like that
Search for 'glue dispensing needle'
안녕하세요 ravi님 영상 잘 보고 있습니다
디테일 작업하시는게 정성이 진짜 엄청나시네요!! 그리고 혹시 저 디테일 작업하실때 쓰시는 투명막?같은건 어디서 구하시는건가요?
변성열 테이프 말씀하시는건가요? 패널라인 가이드 테이프 입니다. 건프라 모델링 용품 사이트에 팔고 HIQPARTS 제품 3mm 사용합니다~^^
RAVI PLA 감사합니다 앞으로 영상 꾸준히 올려주세요!!ㅋㅋ저도 보고 배우고 싶네요ㅎㅎ
앗!!드디어 상체시작이군요...즐감하겠습니다.....
네~ ㅎ 감사합니다 ^^
I think its the best And very-very-very detail
Thanks :D
Where can i buy it, it is amazing! O would like to have one master piece like that!!! 😱
What are those thick tapes called? Link me please. Tnx
Search the 'scribing guide tape' in Google.
God damn why are u SOOOOO GOOOOOD ? God I wish i have your wonderfull creativity
Thanks :D
すげえええええええええええ
うますぎいいいいいいいいいいいいいいいい
ありがとうございます
How do you plan your panel lines?
I sketch the parts myself until I have a design that I like.
이런건 어디서 배운건가요?