Couple of Questions: 1. How thick are the plates that connect the vertical extruded aluminum on the Gantry to the Rails? 2. How thick is the aluminum Plate between the vertical extrusion on the gantry to the horizontal beam on the Gantry, and what is that plate used for? 3. How thick is the red plate that goes up the height of the gantry 4. How thick are the end caps on the beam of the gantry? I have a home built cnc, and I'm looking to upgrade the gantry with some milled aluminum, and they seemed to have the thicknesses worked out. When you said that that one plate as 5/8th thick, I was thinking it was much thicker, so I'm curious now what the others are. I originally thought 3/4" to 1"
1. 5/8” stock with pockets milled for linear bearings 3/8” in those areas. 2. 1” thick. It’s bolted to the riser then gives you a strong way to tie to the gantry. 3. I’m not sure which plate you’re talking about but the strap that reinforces the gantry to riser joint is 3/8”
I have one of these myself. However, I'm wondering if you had to adapt your m6 tool change macro to this setup. Also, how good are your circles? Mine have issues
Couple of Questions:
1. How thick are the plates that connect the vertical extruded aluminum on the Gantry to the Rails?
2. How thick is the aluminum Plate between the vertical extrusion on the gantry to the horizontal beam on the Gantry, and what is that plate used for?
3. How thick is the red plate that goes up the height of the gantry
4. How thick are the end caps on the beam of the gantry?
I have a home built cnc, and I'm looking to upgrade the gantry with some milled aluminum, and they seemed to have the thicknesses worked out. When you said that that one plate as 5/8th thick, I was thinking it was much thicker, so I'm curious now what the others are. I originally thought 3/4" to 1"
1. 5/8” stock with pockets milled for linear bearings 3/8” in those areas.
2. 1” thick. It’s bolted to the riser then gives you a strong way to tie to the gantry.
3. I’m not sure which plate you’re talking about but the strap that reinforces the gantry to riser joint is 3/8”
4. 1” thick
My old routakit was .25” everywhere
@@accidentaltradesman5139 thanks for the Info! You answered #3 with what I was asking.
I have one of these myself. However, I'm wondering if you had to adapt your m6 tool change macro to this setup.
Also, how good are your circles? Mine have issues
Hey! Yeah I had a video on my M6. I modified it to use my tool setter. My circles are perfect, what’s going on with yours?
Hey! I'm interested in this . I appreciate the honesty in your review. Can you advise how it went once all done?
So far it’s phenomenal
Please how did you get the pro4896 and how much for complete set