New Off-Set 3D Mask Design with No Template or Detailed Measuring Required!
HTML-код
- Опубликовано: 25 июл 2024
- Hello Shiny, Crafty People! Welcome back! Today I'm making a cool variation of the common 3D mask that requires NO template and NO detailed measuring!
You'll start with 2 (or 3 for an extra layer) fabrics cut to one of the following sizes:
XL: 9"x10"
LARGE: 8.5"x9.5"
MEDIUM: 7.5"x8.5"
SMALL: 6.5"x7.5"
THAT'S THE ONLY MEASURING YOU HAVE TO DO!!!
Here's what else you need:
Matching thread (if desired)
Elastic
Silicone Toggles for the elastic (if desired)
Iron or wood press
Sewing Machine
Scissors or Rotary Cutter
Here's where I buy my elastic: www.amazon.com/Elastic-Shed-P...
Here's where I buy my silicone toggles: www.amazon.com/gp/product/B08...
If I'm not recording a video, I can make one of these masks in less than 5 minutes. And they're quite gratifying to make AND very comfortable to wear, as long as you get the sizing correct.
I would suggest the LARGE for people with bigger faces. If you typically require a large mask in any other type of mask, choose LARGE.
MEDIUM is good for "Goldilocks." You know, that person who thinks some masks are too big and some are too small. MEDIUM seems to fit men and women of average or smaller stature, although some much smaller faces may find this one a little too big.
SMALL is great for little kids and for people with very small stature.
You can always find an "in-between" size by using a bigger seam allowance. So if the MEDIUM is a bit too big and the SMALL is too small, try utilizing the MEDIUM but using a 3/8" seam allowance rather than a 1/4" allowance.
SPECIAL TIP:
Choose an inner fabric and an outer fabric that contrast greatly. That would provide the nicest look when you use this reversible mask in the second configuration.
MY REVIEW:
I rate this mask 8/10 for comfort, ease of construction, and effectiveness for my face.
Have fun making this cool & easy mask and, until next time, stay crafty!! 
Наука
Love all your masks!! This one is so far the easiest looking one to make!!
BRILLIANT thanks for showing how to make this lovely mask keep safe x BLESS.
I like this mask style very much. Of course everyone tweeks a little to fit the user’s face. My tweek was requested by my son. I added 3 2” vertical wires, 1” apart at the mouth. I made 3 very slits at top of mouth, slide in the wires, then sewed each closed. Made the mask day after you submitted this mask. It fits my son’s face and keeps the material away from his mouth. He has worn it every day since. It holds it fit well. Only issue is he has to wash by hand rather than the washer because of the wires. I enjoy your videos. You present the material very well. Thank you.
That’s a cool idea!
Thank you, you are super amazing. God bless you and your family. One Love, Brother.
Its nice and comfortable to use. Easy doing it.
Much easier on my machine than sewing through nine layers of fabric to make 3 pleats! Yours is my new favorite mask to sew!
Thank you thank you! I’ve made so many masks but this pattern has been the easiest. Your instructions were easy to follow, I made two masks in less than half hour. Again thank you best to you in the new year. Gloria
You explain things so well
Clear, precise, easy to follow tutorial with excellent results. Thanks so much for taking the time to demo it.
Discovering your channel has been the highlight of this past week. 💜 probably going to try the one with the dish template first. But this is going in the mix. Keep crafting, you’re awesome!
I saw this a couple of weeks ago and got busy. I sewed a dozen with the long side a the top and a week later another dozen mistakenly using the short side as the top. They fit differently. The short side as top came too high around the eyes. I can’t tell from your instructions which was your preferred way. I also put nose wire in before sewing up the opening for turning. Then I sewed all around sewing the nose wire securely in place. My son loved the design but wanted a larger one, 10.5/ 11.5. He loves that there is much less glass fogging. Keep up the videos. Your steps are clear.
I love the kitty cat print
Great mask design, I subscribed too! Last year I learned to sew on a machine and made 50+ pleated fabric masks for friends and family so now I'm ready for new patterns, thank you!🌷
Love this mask pattern! I am definitely going to make myself one!
Timothy you are very talented! Thank you.
I look forward to trying this! Sewing masks for school is not something I had practiced for!
Thank you. I really enjoyed your tutorial on this mask. I am going to make some because I have so much material just boxed up. I don't quilt any more, so this might give me some inspiration.
Hopefully when this is behind us we will remember to wear a mask when we have a cold or feeling less than 100% ; I think it could go a long way to help with the spread of germs
ruclips.net/video/ZtfW-PyIhtk/видео.html
Knob head it will never end, too many sheep that cannot think For Themselves
You do understand that the human body needs germs and bacteria to survive don't you? How on earth do you think your immune system evolves, you are not born with one.?
@@alandavidge1273 that's the reason they have blagged the fools keep cleaning hands with anti bacterial. The sheep are thicker than sheep and they not that bright.
@@alandavidge1273 but she did say when we're sick with a cold or such, not 24/7.
OMG perfect and easy!! Didn't even need a template!!! Thank you!!!👍👏🤗
This is really good, easy making and room to breathe. Thank you.
Your tutorials are so much easier to follow than the other ones I’ve watched. THANK YOU. Plus, I feel like we are friends or something. You’re terrific.
That’s very kind of you. I like friends! It’s always nicer to learn from someone who makes you feel comfortable.
Thank you so much for this! I was looking for a new mask design to try in the new year! Can't wait to give this a shot. Happy New Year!
Thank you for sharing this design. I made two of them. I found you very easy to follow. Thank you again!!
Like that style. Comfort and being able to breath, it seems. 👍
Great looking and easy. Thank you for all of your wonderful tutorials. Happy holidays to you.
As a novice seamster, I love all your explanations and ratings! I will be following you! Thanks!
New sewing and choose this patten to make my first mask, amazing and very easy to following instructions. Thank you for sharing.
I’m so glad to hear that!!
Merry Christmas 🎄 Timothy! Great looking mask. Thanks for your time and tutorial. Have a great day tomorrow!
Blessed and Merry Christmas to you and yours, Tim! Can’t get together with the family this year, so I’m spending Christmas grooming the dog and making masks - your patterns are fun!
I am going to try this one next weekend. Awesome-sauce!
Those are pretty cute and looks really simple to make. I’ve made several masks and now I’m going to try this one.
Happy Holidays! Thanks for all your help!
Mahalo Timothy for sharing your work! I love that it's a 3D reversible. I also loved how you presented it making super easy to follow. I can see you not only have passion for sewing but also enthusiasm for your work. Never change, you are beautiful!!!~~cc
I just made this one and funny thing made it out of Xmas green plaid fabric!!! Great fit and your directions are so easy to follow.Thanks for another great video. Your the best.
I really liked it. Going to see one.
Very smart design!
Thanks for sharing!
This video just popped up in my recommended videos and I am so, so happy to have."found" you!
Thank you for this easy, easy attractive mask! I do a couple of things differently: I sew across one side & then stick down the nose piece on the inside of the top, turn the fabric & stitch around the nose piece. Then sew around all the edges leaving an opening & turn inside out & stitch around the whole thing. One other thing: I have a small face so I reverse the top and bottom; the smaller pouch fits my nose better!
I haven't sewn it yet but I want to thank you for clear instructions. Details make the difference. Thank you so much. Looking forward wearing this mask design.
I made this mask this evening. I find that I like my masks 'larger' for comfort as long as they fit snug to my face. Anyway, I tweaked it a tad bit...by tucking in the upper corners where the elastic goes to keep the corners from being to high on the face. I also added a nose piece by sewing in a matching piece on the 'front' side. I like the wrong side out and I used a 10.5 x 11.5 inch piece and added a piece of filter material (polypropylene) of the same size sandwiched between the two pieces of fabric. I have made hundreds of masks and I have to say this is one of my favorites. It reminds me of the old pandemic masks you see in photographs...but it is super comfortable, sits far enough away from the mouth that you can easily breath. I wish I could post a photograph of how nice it looks. Will definitely make many more of this mask.
do you mean you may have cut a rectangular piece of material and sewed the nose piece on afterwards ?
@@betsyforth6924 - Yes. I should have been more clear. The mask size I made is 10.5 by 11.5. I then cut a piece of fabric about 2" by 4 or 5"....sewed it together leaving one end open then turned it inside out. Stuck the nose piece in, tucked in the unsewn end and then placed it at the top of the 'right' side and sewed in on all the way around.
I agree that the mask needs to be a little larger. I made a 10x10 (layer cake size) and still wanted the fit closer to the ears. I did not add any additional fabric for the nosepiece. I simply sewed two parallel lines at the top to slide the piece in between. Since the aluminum strips from the big A have been getting thinner, I use two glued together so don’t worry about breaking/replacement. To get the extra side fabric away from the eyes, like you, I also pleated it into itself (making a v) before I sewed on the elastic.
I only like it turned inside out. It felt too flat as sewn.
All in all, with some tweaks this is a good pattern. It is much faster then the 3D I have been making (I will look up and post the author, it’s in Spanish I think). Since I always use interfacing, adding it will take a little extra time. Not sure I’m ready to give up on my 3D because it has half circle cut outs to get a peak for the nose, less bulk near the eyes, and I can get 16 outer fabrics from one yard. My 3D is from ruclips.net/video/s5NCeTet7mE/видео.html and for the sewing hints ruclips.net/video/0AzeR7QCbQg/видео.html.
thank you for presenting this design.
That sure was easy. Thanks for creating the tutorial. Merry Christmas.
Happy Holiday to You and Yours. Thanks for the video on Christmas eve.
Merry Christmas, Timothy! I'm really anxious to try this design! Thank you so much!
I'm on a budget. I'm using fat quarters to make masks and want to use as much fabric as possible without waste, and find a pattern for a mask that won't fog my glasses. This pattern is perfect!
This was really helpful and you are so enjoyable!
THANK YOU. KEEP IDEAS OF KINDS OF STUFF. STAY SAFE.
Great tutorial easy to follow n explains everything very well. Enjoy following you
Thanks,Timothy......New to your vids and an amateur sewer......making the masks for the Family. Like the larger breathing area of this one. Hope your New Year is great.❣️🤗❣️🤗❣️
Just found your site. I too watched the other video with the music in the background. I switched it off and found you. You are a natural teacher. Thank you for sharing. BTW I have subscribed to your channel and hope to enjoy more of your work.
This one is very similar to the one I make. I first saw orangedot do it, I use interfacing instead of batting as she did, but pretty close. When you make a lot of them simplicity is key...luv ya thanx
Thanks so much for sharing this mask🙋🏻♀️👍🤗 will try to do 👍
Tfs another great mask video! 😷 Merry Christmas 🎅🎄
Looks nice and good fit. Thank you.
Love it 😍 Thank you for sharing 👋
Merry Christmas to you Timothy from Malaysia. May God bless you always. I’ve done the SUPER-EASY 3D mask and loving it and will give this a try. Thank you.
Merry Xmas, my BFF. I love, love, love the kitty fabric and you’re the ginchiest, too, Moondoggy.
Thank you for the video.
Informative and thoroughly enjoyed your presentation.
I developed a mask pattern that uses rectangles cut on the bias. I flip the top down a little and pinch in the sides. It fits great, measurements are easy, and the bias-cut fabric stays in place much better, especially with elastic that goes behind the head. I’ve tried it on all sorts of face shapes and nose lengths, and everyone reports great fit.
Looks easy! Thanks. Merry Christmas!
Sweetie thanks for sharing you explained sooo good!!😊
Happy Holidays. Stay safe and healthy until this crazy virus is gone.
Thank you for continuing making new and different masks.
I’m gonna try to make it myself! Looks awesome!!
I love it and looked comfortable.
A+ great job and idea, I'm going to start my !!thank you
Nice one here, love it, thanks
Great demonstration! Thanks.
Looks cool, I have started to sew a little twill fabric tape on the nose area and leave an opening to insert wire that I can easily remove before hand washing. Will try this design, love that it can be worn both ways.
That’s a great idea!
I was looking for men mask , I loved this mask , now am going to try to do another layer for filter , thanks.
This is a great pattern. I had to tweak the size for my husband by not sewing a complete V shape so he could get it over his chin. Very comfortable.
I love it so simple and great direction... Your are great
Thank you so much Timothy I really really enjoyed watching you create this very very clever mask. I really really love ❤️ when you turned it around and it was two toned. I really really like having a channel for the elastic, so maybe you could create the same thing but with channels, it would be really awesome. Please stay safe and well too xxx Mags
I made this today. Very easy to follow instructions. Used a sewing machine for the first time today too. The size I made was too small, but I'll try again.
I’m glad to hear it! Have fun!
@@timothytotten9409 It was, genuinely (had music playing too). After this sewing adventure, I now have the confidence to attempt to fix my Marimekko comforter that I put in the closet months ago. Thanks, Timothy! Happy New Year!
Thank you! Love this one! I’ll be making it tonight!
Check the sizing before you start. I wear an XL but the medium isn’t much smaller and the person I made the medium for really needed a small. You can also adjust your seam allowance from 1/4 to 3/8 and adjust sizing down a bit that way too.
This is Beautiful!!
This rectangle 3d pattern is much easier to follow than the 3d octagon shape. I'll give it a try this weekend. Thanks so much.
Timothy, thank you for this tutorial.... very easy, and love the fit and design... Made 3 since yesterday.... and thank you for all your time... I just somehow found your page here on RUclips.. and wow, I'm so happy I did... love your way of teaching us... Jon
So glad you found the channel! Thanks for sewing with me!
Thank you for this video! I just got back into mask making after a long hiatus, and thought I would check RUclips for something new, and this is it. I’ve now made 5 of them 😃
I’ve made a bunch of these now and my friends/family love them. Very breathable, great for glasses, and so freaking easy to make! Thank you thank you thank you!
ALSO: if you have a serger, just serge those initial edges wrong sides together and skip the step of flipping right side out and top-stitching.
loks fab going to try it ..thank you 👍
So cute
Really cool Tim
Great idea I love this
Is a very pretty mask is a new stile different at others i like the two ways for use and i like the way you show to iron with the piece of wood that's great idea 👍👏💪
I can’t sew to save my life but I love origami! This looks like a great design for us glasses wearers. I actually watched a sewing video! Thanks!
Hi! This mask was pretty easy! Made one for me, and one for a good friend who also wears glasses. I have a request for a video that shows how to make pot holders...I find your explanations are very easy to follow! Thanks for your consideration!!
Awesome. Thank you.
Thanks. Gonna give this a try.
I like the facts that we can get 2 different looks in a mask! Yaaay, I can play with my scrap fabrics ❤️
Merry Christmas and have a happy New Year with new bunch of fabrics!! ❤️
This is so great!!! I struggle with cutting from patterns and having the different pieces the same size. Plus everything is always too small for my fat face. Thank you!!!
Love the cat fabric!
This is my first time seeing one of your videos and I am immensely impressed! You are such a great teacher because details matter. And your upbeat personality put the icing on the cake. Thanks so much and I am looking forward to making this mask and checking out your other videos. I give this video a 5 out of 5 stars.
Thank you for the very kind review! I love getting 5 stars! Lol
New to your channel (subscribed 👍😉). So glad to have come across this super simple, no measurements design as I'm teaching myself to machine sew 😓. Looking forward to watching all your videos and learning more from you!
Cheers from Ontario, Canada 😊🇨🇦
Love this mask style.
Very nice thank you for sharing your videos
You should do a rating video for every mask design you made - pros and cons... would really help us out in choosing what to make :)
Like :
Best design for glasses
Best design for beard
Best design for ease of sewing
Best 3D mask
And so on....
Really Think it would make a great video to help us through the rest of this pandemic!!
That’s a great idea.
@@timothytotten9409 ooooo .. it could be the Awards Show for Best Mask Design! lol .. and then pick for the different categories .. and the Oscar goes to ... heehee
🏆
Hi
Looks great
Thank you for this awesome design! 🥰 I’m getting back into sewing and I’m definitely gonna try this. 🙏🏻👍🏼 God Bless
Also, I’m a NEW SUBSCRIBER Yay! 😁
I did not hear shiny crafty people... Best laugh in a while.
I have one that's a similar design, it works great for glasses!
I’m liking this design over the other designs.
I’m a fan too! It’s got a very geometric nature, so it’s kinda pointy. Foe the next one of these, I’m going to use some stabilizer to keep the lines of the mask crisp.
Love the fabric with the cat faces on it! :-)