I was able to avoid removing the skates by flatting a qtip with pliers, soaking the qtip with a drop of mineral oil and then inserting the qtip from the front in between the plastic parts, lubricating a plastic post/plunger that sits about 1cm from the front.
sigh. Legit just had to replace my Model O with a new mouse because the left mouse kept double clicking. So, I get the Model D wireless, and what do you know, within about two weeks now the right click button is squeaking. Love the aesthetics and feel of the Glorious mice but the quality is obviously just subpar at this point
where the plastic meets the shell of the mouse, at 2:16 I point directly at it, its basically just the sides of that plastic part with the black square on it.
when you pull mouse skates off, you gotta pry it from below and not peel it to the side. peeling it to the side causes the mouse skate to bend and deform, which is probably why your skates dont have as good of a glide as before. You can try using a blow dryer on the skates and flatten them as much as possible or just get new skates entirely
For those who don’t want to take the mouse apart. You can just take a wd-40 can and stick it into one of the holes. It does cause slight leakage if you’ve put too much it. But so far it has stopped the squeaking and no issues have occurred. Just make sure you use a very small amount.
omg it workes thank you dude i got that recently and i thought that i was going to need to get a new mouse thank you so much you are a savior that sqeeking was so annoying!!!
Thank you that helped me, i was getting annoyed and made my mouse my backup mouse. Main is now superlight but now i have 2 mains while the other charges
the front ones are hooks not clips i think slide backwards a bit while pulling apart on mine i shaved the plastic instead of lubing because looping lasted me 4 months.. and now its flawless.
Just so people are aware. I did the exact same thing that was showed on the video and it did not fix it. What fixed it for me was I had to remove the Mousewheel LED tab for my right click to stop squeaking. I just unscrewed it and left it hanging there. Just a FYI.
i just wanted to ask i have the model 0- and the build quality is a little rugged like not bad but when i press hardly on the mouse it feels like its gonna crack or something just wondering if u have the same thing and also can you explain to me what is lube in particilar
Is there a way that doesn't require taking apart the model o? Because if I mess it up, it will cost me $90 to buy again, since prices in canada are outrageous.
I think there is another video that shows a fix without opening the mouse but I haven't seen it myself. Opening the mouse and applying the lube really isn't too dangerous and you shouldn't mess it up since it's not messing with the wiring or anything.
it works only think i fucked my glides when i took it of its not smoth on mouse pad anymore to move around mouse and new glides are 10$ i have only for 1 week this mouse payd 80$ :/
looking at my model o. you can probably use a syringe with somewhat big diameter needle to drop lube at the front and sides of the plastic knob touching the casinng. you won't reach the backside tho. should work.
So i have to lose warranty to fix this shit? Invest 50$ and buy Logitech superlight. I really hope a Japanese manufacture a mouse, American products are shit lately, doesn't last, they come bad from fabric, just like mousepad just check g640 they last 1 month if you have luck. Superlight is shit tho it last 6 months and sides start to get fuckd up
I was able to avoid removing the skates by flatting a qtip with pliers, soaking the qtip with a drop of mineral oil and then inserting the qtip from the front in between the plastic parts, lubricating a plastic post/plunger that sits about 1cm from the front.
thats smart i never thought of doing it like that
Thanks! I appreciate the video and this comment. Helped me fixed the issue.
omg i literally just searched for "squeaky mouse button" and all that came up was glorious model o
sigh. Legit just had to replace my Model O with a new mouse because the left mouse kept double clicking. So, I get the Model D wireless, and what do you know, within about two weeks now the right click button is squeaking. Love the aesthetics and feel of the Glorious mice but the quality is obviously just subpar at this point
same
i dont get where EXACTLY do i have to put the lube
where the plastic meets the shell of the mouse, at 2:16 I point directly at it, its basically just the sides of that plastic part with the black square on it.
just do somee oil and i fixed
this helped with the squeak, but what i dont understand is how you put the skate back on and still have good glide.
when you pull mouse skates off, you gotta pry it from below and not peel it to the side.
peeling it to the side causes the mouse skate to bend and deform, which is probably why your skates dont have as good of a glide as before. You can try using a blow dryer on the skates and flatten them as much as possible or just get new skates entirely
if you did it wrong, you may need to get new mouse skates.
For those who don’t want to take the mouse apart. You can just take a wd-40 can and stick it into one of the holes. It does cause slight leakage if you’ve put too much it. But so far it has stopped the squeaking and no issues have occurred. Just make sure you use a very small amount.
thank you so much, my right click was squeaking every time i clicked and it was drilling into my skull, so i owe you at least four
U an absolute W, W life, W family, W channel
I'm a little afraid that it will spoil the mouse but I will try because I can not stand this squeaking sound anymore
same
omg it workes thank you dude i got that recently and i thought that i was going to need to get a new mouse thank you so much you are a savior that sqeeking was so annoying!!!
Me too
Thank you that helped me, i was getting annoyed and made my mouse my backup mouse. Main is now superlight but now i have 2 mains while the other charges
Awesome thanks, just did it and worked absolutely fine!
the front ones are hooks not clips i think slide backwards a bit while pulling apart
on mine i shaved the plastic instead of lubing because looping lasted me 4 months.. and now its flawless.
noice mouse pad
Thank you so much! This helped me so much! You earned a sub
for a little while my right mouse button squeaked a lot, but it has dissapeared after dissassembling it, to assemble it once more.
@@themealmanx im too afraid to disemble it, I have done it with a different mouse and it broke ;-;
Thanks this helped me. one question is it ok if I put vaseline cause it eliminates the squeak a little?
@mr ahqro yes but you have to be very careful
um can we have a zoom at any time near 7 o clock
cause I need help ????
dont use zoom but what you need
@@ripnxll um just wanted to say thanks in person through zoom
@@ms.glizzy4743 oh that actually means a lot, you're very welcome
@@ripnxll do u have discord cause I can talk with you
@@ms.glizzy4743 yes i do, ryan#1495
try bro ur first vid and i have glorious tysm
Just so people are aware. I did the exact same thing that was showed on the video and it did not fix it. What fixed it for me was I had to remove the Mousewheel LED tab for my right click to stop squeaking. I just unscrewed it and left it hanging there. Just a FYI.
nah it worked
i used some skateboard lube, thanks man
My left click moves to the right anmd to the left and if i press it like where the click starts it makes a really weird noise
hello can I ask a question so I bough a model o mouse and tried to Drag click on it but it doesn't work at all can you please help me!
do you know of any alternatives to keyboard lube that will work for this? Thanks!
dialetic grease, any kind of oil that isnt used for cooking will work honestly. dont use motor oil though. just some form of lubricant will work well.
@@ripnxll thanks! I used silicone spray and it worked but ruined a tiny part of the finish on the outside. Thanks for the tutorial.
can i use Vaseline?
Haven't tried it myself, but I don't think it could hurt to try that.
it worked ?
@@KLAI i apparently fixed it without doing anything lol and is still working fine after 2 months. So idk
its sad that this video needs to exist
i just wanted to ask i have the model 0- and the build quality is a little rugged like not bad but when i press hardly on the mouse it feels like its gonna crack or something just wondering if u have the same thing and also can you explain to me what is lube in particilar
Not to be that guy but. HOLY SHIT THAT MOUSE PAD.
What if all you have on hand is like, WD-40. bad idea or will taht work as well?
that should work just fine i believe
i have a problem with the mouse when i drag a file or drag on letter my mouse is like quadruple clicking on 10 ms an 16 ms debounce time
your mouse is an autoclicker
that's probably some software, there's only one mouse that can quad click that I know of (A60), and setting ms to 16 would eliminate that
Turn off sticky keys
Does this work with the model D?
Yep I tried it
I dont have the model o but nice
what's the rgb code for that color?
Pls someone help i got my side button out i dont know how to get it bacl pls pls help
can u use oil instead of lube
Works perfectly thx
Can I use g lube
most likely yes
can u pls specify the lubricant that u used
i have no idea what kind of lube it was, i took it out of my keycaps
Does oil work?
Can i use petroleum jelly?😢
i think so, any general lubricant should work
@@ripnxll cuz i use wd40 in my rakk talan mouse click and the grease got stuck inside and its now rough af😂
the lube worked thanks
Is there a way that doesn't require taking apart the model o? Because if I mess it up, it will cost me $90 to buy again, since prices in canada are outrageous.
I think there is another video that shows a fix without opening the mouse but I haven't seen it myself. Opening the mouse and applying the lube really isn't too dangerous and you shouldn't mess it up since it's not messing with the wiring or anything.
@@ripnxll Thanks!
@@ripnxll I’m worried about the skates and how do I stick them back on, also what lube can you use?
@@neon-original I didn't use any lubes to put back the skates.
90 cad is lucky I had to pay 120
IT WORKED
You are my godd thank you
what is that mouse and how did u put it on only purple?
its a model o wireless and the lights can be set up in the software
it works only think i fucked my glides when i took it of its not smoth on mouse pad anymore to move around mouse and new glides are 10$ i have only for 1 week this mouse payd 80$ :/
THANK YOU THANK YOU THANK YOU
what is your rgb code your purple looks nice
#360D8C
@@ripnxll Sorry, I don't understand your code. Can you tell me R number, G number, and B number?
@@Jason_a_bug yes, rgb(54, 13, 140)
@@ripnxll thanks
Ehmm what about the mouse feet?
what about them
@@ripnxll how do you get Them back on? :)
@@adamwilliams2948 they should just stick back on
@@ripnxll Okay great! Thanks :)
mine used to squeak so much and it just randomly stopped completely
hopefully what happened to you happens to me i dont want to pull apart this mouse on the second day i got it
@@ronchon3082 did it stop ronchon?
@@benjefferson it still happens sometimes
@@ronchon3082 it's unplayable.
Hey do you know if the wireless works on PS4
I don't think so
does vaseline work?
considering its grease based, i think it would work but id be careful with it
@@ripnxll i ordered the one from glorious not want to take a chance... but i use the vaseline to lube door hinges and does real good job...
thanks bro
4k quality SHEESH
SHEEEEEEEEESH
Could I use aerosol wd40
no use dielectric grease
Does this work with wired?
personally i wouldnt know, id assume its the same process but id check out other videos before hand
thanks for the fast reply! :D
Is there a way I can do this without taking the mouse apart?
looking at my model o. you can probably use a syringe with somewhat big diameter needle to drop lube at the front and sides of the plastic knob touching the casinng. you won't reach the backside tho. should work.
What do you mean by jelly? Lol, I dont have any keyboard lube.
like any gel lubricate should work i think
Vaseline
ty
Thansk
i just sent the mouse back and got another logitech mouse lol
So i can use my adam and eve lube? jk
Yeaaaaa thanks
Your Shidenkai is fallen apart
thanks bro i totally didnt know that :/
would WD40 Work?
havent tried it myself but i dont see why it wouldn't work
@@ripnxll Ty
@@kirohxl6960 I heard that wd40 could damage plastic, after I already put it on my model o, have u had any problems?
@@web3986 it does
So i have to lose warranty to fix this shit? Invest 50$ and buy Logitech superlight. I really hope a Japanese manufacture a mouse, American products are shit lately, doesn't last, they come bad from fabric, just like mousepad just check g640 they last 1 month if you have luck. Superlight is shit tho it last 6 months and sides start to get fuckd up
this video is fuckiogbhn awaeosme
Just buy a new mause
first world solution LOL
@@acanadianfry2539 im from 3th world xd
@@aammaro9634 what
@@acanadianfry2539 im from latam
this video is fuckiogbhn awaeosme
thank you for the heart kind stranger!