where i am its $30 for the standard pull start and ive destroyed 5 in one day, installed the TR V2 pull start and have done 6 days racing and its still looking brand new works perfectly, just keep it clean after each day of use and this is by far the best pull start available
Sold!...I just ordered one with the pre-filter from you. I couldn't believe it when my pull start failed on my brand new Losi 5ive T after only one run! its disappointing to spend $4000 to be shut down by a cheap plastic part, I would think Zenoah would know that pull start is going to take a beating. I would suggest Turtle team up with Zenoah or Horizon Hobby to supply them as stock, there are hundreds of complaints about the plastic one, It seems like common sense to me. Anyways thank for the video, i should have looked if you had the piston lock before i ordered but ill find one somewhere it will come in handy down the road I imagine.
im watching this video because after years of owning this pull start, i have had tons of problems. even my friend with the same pull start has problems. this time my cable didnt wind back up so i had to take it apart and let the cable wind back up straight. i just dont know what to think about this pull start. i already went back to the stock pull start
Hi, just installed TR Pull Start V2 and the first pull was amazing, engine started, shutted off and one pull again engine starts until 3rd time. The fourth pull didn't made it and the cable didn't return. Opened up and found the spring twisted. What causes this. Thanks for your comment.
awful pullstart, mine is 4 weeks old and completly buggered. the cable is fraying, the pawl has snapped the spring has snapped and its impossible to rebuild. i would advise eveyrone to avoid this pullstart, stick with normal ones
Is there going to be aTurtle Racing Pull Start V3 That is not a piece of junk and also without a stupid turtle machines on the side of it. Think of the CNC router or carbide cutting bed that has the machine that logo of a turtle you could save that money and make the product cheaper so I don’t have to pay over 100 and be stuck with that stupid turtle
Besides the fact that nothing rotates unless you are STARTING, so "rotating mass" isn't a thing here... This design has zero ability to flow air for cooling, your engine will overheat.
I know this is an old post. but yes this does have rotating mass effect if you’re holding something to the center of the crankshaft and it rotates after you start the engine that is rotational mass and what you’re doing is just that not sure if it’s enough to :age a noticeable difference but. I’m not disagreeing with cooling. But it would just be easier. And better and cheaper to buy the spacer from DDM SKU EG583. Costs $54.00 Then you can install the GP460 Starter on regular RC Engines. Figure set up heavier duty pull start in general. Then you don’t have to have a turtle machines on the side of the Pull starter if you don’t wanna advertise for someone else let alone I wouldn’t want a turtle on the side of my engine but that’s me
Who would want a turtle CNC machined on the side of the engine not me. Especially an advertisement for Junk. Why waste your money on this when you can easier. buy the spacer from DDM SKU EG583. Costs $54.00 Then you can install the GP460 Starter on regular RC Engines.
I know this comment is a bit old, but judging from your comment you haven't actually looked at the design of this product. The pull start itself doesn't have vent holes, however if you look at the base plate it sits on there are plenty of holes for the flywheel to draw air in from. There is more than enough room for air flow through these holes to get air into the flywheel and around the engine.
Thank you for all your great videos and tech support 👍I'm a big fan.
....plus your tutorials are CLEAN AND EASY TO UNDERSTAND ...how the things work,especialy for dummy's like me.
Today i finally got this pull starter, it is a peace of rc-engine art, just love it..
where i am its $30 for the standard pull start and ive destroyed 5 in one day, installed the TR V2 pull start and have done 6 days racing and its still looking brand new works perfectly, just keep it clean after each day of use and this is by far the best pull start available
9:50 that was the most violent tighten ive ever seen, you are so lucky that didnt snap the screw in half or strip the hex lol...
Again a lovelly movie! And this time we got a face to the voice! Great job TFE! I will have my own V2 in a couple of days !
Looks nice, but what about air circulation? On my engine pull start cover acts as a pre-filter for engine fan
Fantastic pull start!! Definitely getting one for my 5T. Excellent video mate, easy to understand. Liked and subbed
Sold!...I just ordered one with the pre-filter from you. I couldn't believe it when my pull start failed on my brand new Losi 5ive T after only one run! its disappointing to spend $4000 to be shut down by a cheap plastic part, I would think Zenoah would know that pull start is going to take a beating.
I would suggest Turtle team up with Zenoah or Horizon Hobby to supply them as stock, there are hundreds of complaints about the plastic one, It seems like common sense to me.
Anyways thank for the video, i should have looked if you had the piston lock before i ordered but ill find one somewhere it will come in handy down the road I imagine.
Will that v2 dog cage work with rovan easy pull start 🤔 with machine flywheel
I suggest you use a torque wrench because you are definitely over torquing those bolts.
im watching this video because after years of owning this pull start, i have had tons of problems. even my friend with the same pull start has problems. this time my cable didnt wind back up so i had to take it apart and let the cable wind back up straight. i just dont know what to think about this pull start. i already went back to the stock pull start
Hi, just installed TR Pull Start V2 and the first pull was amazing, engine started, shutted off and one pull again engine starts until 3rd time. The fourth pull didn't made it and the cable didn't return. Opened up and found the spring twisted. What causes this. Thanks for your comment.
Thanks man👍....1000.oo 5th scales with .40cent pullstarts on them" smh...ill have to try this out
Awesome hop up..
@KoneRacing They're in stock at DDM. TR shipped 500 units so it should last a little while.
I need that pull start I got same flywheel how to get ?
i love that tr pull starter..
pretty intense for a pullstart
It looks a lot heavier than the standard pullstarter.
Good Vid. Helped a lot.
i must have one of these.
Great vid thanks
I despise you, sir!!! -Fluxn81
awful pullstart, mine is 4 weeks old and completly buggered. the cable is fraying, the pawl has snapped the spring has snapped and its impossible to rebuild. i would advise eveyrone to avoid this pullstart, stick with normal ones
Hello where can I buy it and fit into the redcat rampage XB
Im picking one up!!!! As soon as there back in stock :(
what about outwears do they fit?
I put mine on and it makes a ticking noise like if you hold the cord out when it's on but is quiet when I hit the gas
can you tell me your piston stopper where i find an item #
I just wish they didn't go with the easy start technology .Those things will work you to death if it don't start right now .
where'd you get the mat from? pm me?
Love it but it's £100 ! In England way too much I think :(
Is there going to be aTurtle Racing Pull Start V3 That is not a piece of junk and also without a stupid turtle machines on the side of it. Think of the CNC router or carbide cutting bed that has the machine that logo of a turtle you could save that money and make the product cheaper so I don’t have to pay over 100 and be stuck with that stupid turtle
More rotating mass on the crank. Not good. Only for posing
Besides the fact that nothing rotates unless you are STARTING, so "rotating mass" isn't a thing here... This design has zero ability to flow air for cooling, your engine will overheat.
I know this is an old post. but yes this does have rotating mass effect if you’re holding something to the center of the crankshaft and it rotates after you start the engine that is rotational mass and what you’re doing is just that not sure if it’s enough to :age a noticeable difference but. I’m not disagreeing with cooling. But it would just be easier. And better and cheaper to buy the spacer from DDM SKU EG583. Costs $54.00 Then you can install the GP460 Starter on regular RC Engines. Figure set up heavier duty pull start in general. Then you don’t have to have a turtle machines on the side of the Pull starter if you don’t wanna advertise for someone else let alone I wouldn’t want a turtle on the side of my engine but that’s me
Who would want a turtle CNC machined on the side of the engine not me. Especially an advertisement for Junk.
Why waste your money on this when you can easier. buy the spacer from DDM SKU EG583. Costs $54.00 Then you can install the GP460 Starter on regular RC Engines.
Congratulations, now your engine will overheat. You do realize this engine is AIR cooled and the recoil starter is the INLET for that air?? ROFL
I know this comment is a bit old, but judging from your comment you haven't actually looked at the design of this product. The pull start itself doesn't have vent holes, however if you look at the base plate it sits on there are plenty of holes for the flywheel to draw air in from. There is more than enough room for air flow through these holes to get air into the flywheel and around the engine.