⚪️ WATCH NEXT 🛴 My latest upgrade for the stem ruclips.net/video/5Uctq-5s9fM/видео.html 🛴 Xiaomi videos you must watch bit.ly/35hyUfm 🛴 Xiaomi M365 Pro upgrade videos bit.ly/37mWNoI 🛴 Xiaomi maintenance videos bit.ly/31nxsH9 ⚪️ Product links in description if you want to upgrade your scoot!
Great video. Just solved my creaking issue by tightening the bolt you described. Probably covered around 50 miles on mine so far and literally just had to turn it maybe half a turn just tighten it up and its now silent again.
i was just ashemed going on the street with that noisy creaking sound of my new scooter, sounded just like that being about to snap or something, i just tightened the centrel bolt of the bearing u said, and its so silent again, thanks, WORKS FOR XIAOMI 4 PRO too
Thank you so so much! Been recommend your video to my fellow scoot buddies (m365 pro) and your a lifesaver. Very informative and I really hope Xiaomi Company really see this video and how you explain it. God Bless and stay safe.
Makisig the.beagle no worries! I am glad I could help. If we all help each other and give support, our scooters should be absolutely fine for a long time!! Thanks for the comment, really appreciate it! Scoot safe 🛴
You loosened the nut, but didn't re-tightened it in the end, that's a major omission for a tutorial! Anyway thanks for the tips, it helped me solve the creaking sound on my scooter. I'm going to add a 4mm allen key, a 10 spanner and an extra lock to my emergency kit, because I already see mine is a tiny little worn out and that's probably the reason why it started creaking. I try to always ride on smooth surfaces even if I have to take a longer route, but there's always that bad patch of road that can't be avoided...
Hi 🤛🏻 I say at the start of the video to pay attention because it’s very important. I mention between 4:58 and 5:04 to re-tighten the nut and I also mention it in a pop up text. Safe riding ⚡️
I never did did change the pin in the end. No need. Got the X-lock and that supported everything. Made a video on that. But there are videos out there on the pin replacement. Here is one ruclips.net/video/S05x7NUvd8o/видео.html
Hey man me again .. sorry to bother you. what is that you are holding at 1:27 in the video where you say if you have snapped one of these in the stem ? what is that ? how do I check to see if mine is OK ? I've ordered the extender and the xlock and I'm watching your previous videos to get my mind ready for the installation once the parts land.. thank god you put these videos up man!! Much appreciated as always
My accent can sometimes be strong for sure! Even the subtitles don’t make sense sometimes! Glad it’s sorted Phil! I ended up getting the X-lock for added support which I find very good ⚡️
@@Movelectrics I’m of Irish descent myself mate - O’Carroll’s :) I’m just looking at your other video on the X-lock now. Subscribed by the way, you’re a natural in front of the camera and there’s no fluff I have to FF through at the beginning of your videos.. informative, well presented and concise. I love it.
Hi could you tell me if any of the modifications you have done will work on the aovo pro electric scooter as iam interested in the suspension for front and rear and where did you buy that red cable cover please
hi mate rhank you for your reply cupple days ago i have a question for you my battery is fully charged and my scooter started going slow and i only had it a week i check all over my scooter mantaince and every thing fine is there way telling me what mite be wrong with it many thanks scotty
The idea is you adjust it as soon as the creaking starts. Lubricant may stop the noise but there is gradual play in the stem still. It will get worse as time goes on. Some people use the dampers to have a firm stem. I would suggest getting them because it’s definitely not safe having play in that area ⚡️
Hi, I want to ask something, I bought pro 2 like a week ago and the scooter started to make this cracking sound 30 minutes after it was out of the box, I searched in Google and I found this video, so you have experience with that problem and I want to ask you, should I return my scooter because of that problem or I should keep it , but if every pro 2 does that noise, why should I return it, because the new one will make the same sounds
Hi Emo! Very important not to pull or push the handlebars while riding. This more than likely caused this. It’s common on the Xiaomi to make that noise. Adjust it like I explain in this video and I would also suggest buying the X- lock for added support (I done a video on that also) 🛴
Fair play man. You can also apply some silicone spray (with your finger) where the folding mechanism meets. One thing that helped, was the X-lock. Consider getting it at some stage. Here is my video on it ruclips.net/video/5Uctq-5s9fM/видео.html
Hi Daniel! This is a reinforced latch that you can replace the stock one with that I adjust in this video. They are only needed if you snap the current stock one. Just avoid jumping, pulling and pushing on the handlebars.
I ain’t familiar with this scooter so check if the stem area is tight. Silicone spray (small amount) is also helpful where the 2 points of the stem meet ⚡️
Hi mate, I need to put a new rear mudguard on my daughters pro2, I've changed one on my aovo no problems at all, but just wandering how do you remove the little supports for the gaurd from the frame of the scooter, where it attaches behind the reflectors?
Hey dude where do you get the plastic bit you put inside to stop creaking and also the reinforcement bars for the mud guard.. Says it's in the description ? Can't see anything.. I have an MI Pro 2, and it's squeaking like mad... I've attempted the re-adjustment and it doesn't really help, in fact it makes me unable to fold the bloody thing.. The bolt with the 10 size spanner, you can lower it but then the top bot with the 4m Allen key doesn't bring the bolt down to meet that nut. it's pretty pointless on this MI Pro 2.. I absolutely hate it.. Had I known I wouldn't have bought this scooter man.. what you think the plastic may help ? where can I source this from? Thanks again dude.
Hi man I know this adjustment is tedious, but you literally turn the front screw a mm by mm until it’s firm when closing. Of course loosing the locking nut first inside and re-tighten when finished. But if there is too much wear and tear, go onto these steps. Another tip is if you have also creaking, you can smear silicone spray where the folding mechanism meets OR by the dampers that are rubber OR you could even just use gaffer tape. I would by the way get the X-lock (video linked below for full explanation) To be honest, I have reviewed so many scooters and almost every single one of them, have stems that need adjusting over time. Also for all accessories, just type ‘Xiaomi M365 accessories’ into AliExpress. X-lock video ruclips.net/video/5Uctq-5s9fM/видео.html
If it almost folded itself, the latch was not secured and tightened properly. I also done a video on the X-lock installation to prevent this from happening ruclips.net/video/5Uctq-5s9fM/видео.html
Hi! I flashed my Pro over 1 year ago, no issues at all. I would suggest getting advice if you have never done it. I got the CFW from a FB group. What model do you have? Pro original/Pro 2…?
@@Movelectrics I have a pro 2 Thanks for your reply to means alot, I'm on Facebook group but given so many different options some say xiaomiflasher and pay the 6pounds others say many other things
Hi the stem on my sons brock it needed welding everything else worked gave it too someone too weld who is saying he's welded it but wheels not working!! Going too pick it up tommorow any info would be great cos I'm going too get fobed off ☹️
Hi Rachel! Why does the stem need to be welded? Did it snap? These scooters are not made for jumping, pulling or pushing on the handlebars. Always need to careful ⚡️
Hi Kamp! Good job! Don’t use the shims, they are a last resort if too much damage has being done. Don’t pull or push on the stem while riding. The X-lock is brilliant, it can reinforce that whole area. I done a video on it 🛴
Hi Daniel! My latest video actually goes through all the upgrades and the links are in that video description to buy them. Here is the video if you want to watch ruclips.net/video/AGOoGUKYrNk/видео.html
Can you help me? When i touch the front bolt, the long thing between the bolt and the clock nut (minute 4:39 ) Would not turn with it. I have the Xiaomi Pro 2 with the new folding mechanism where you just pull up without turning the plastic thing around the stem
Hey hope you can help me explain but for this part 10:04 how there is the front but where the bolts are and there is a line separating the top and bottom yea well my one is uneven and idk how to fix it Edit: just where you are pointing at
Hi Slavic. It’s a not an important adjustment but I think it is best when there is a similar gap on both sides to avoid stress. All you do is position it center with your hand like I show in the video. Then pull up the latch to secure the stem. I would suggest getting X-lock for added support. I done a video on that installation 🛴
Hey mate i got 2 questions. For the main screw that controls the steering angle in the middle, mine is super tight and doesn’t want to move at all. Is this a problem? I didn’t want to force it so i just left it as it is. And for the nut that goes up and down, i can screw until its tight then it pretty much can’t be tightened anymore. Should it be left a little bit loose or tight enough without applying lots of force?
Great video tho! My latch seemed quite tight and had to put quite a big of energy to put it up. I also have a creaking sound, will have a ride tonight and see whether the sound is gone
@@keeaan6895 main screw in the middle is only for steering alignment or when fitting suspension. The nut you can leave just a little bit loose (literally a hair) Also some people apply silicone spray where the folding mechanism meets. I spray some on my finger and rub around. I would consider the X-lock for added support. I done a video on that.
So I’ve adjusted the folding mechanism perfectly, lubricated the mechanism and all on my 1s. Now i’ve bought the dampeners but they don’t even fit. It should make a click and fit into place when i put the stem up but it doesn’t and then unable to close the latch. Can’t seem to get rid of the creaking noise at all, it just keeps coming back. Feel like bringing the scooter back via guarantee
Hey man, mine was bumped into a fence while I was on holiday by my brother and now it requires a lot more effort to turn it left and right, why is it so stiff??
There's no need to disassemble and adjust the whole thing, can just either use the silicon damper pad on that place or use some wd-40 lube it will stop creaking immediately.
I don’t disassemble anything, simply adjust and will take just a couple of minutes. Like I mention, the silicone dampers are used as a last resort and WD-40 definitely ain’t the best. Silicone lubricant is. My solution? Adjust first like in this video, then simply buy the X-lock (made a video on that) Problem solved.
Hi Jamie More than likely the middle bolt (located in the middle when you fold the handlebars) is too tight. Loosen that a really small bit until you are happy. Don’t loosen it too much as this aligns your steering and pulls the bearings together ⚡️
@@Movelectrics thanks for the reply love your vids one last question if you can help me that locking bit at the front when my handles bars are lines up straight and my wheel also straight and look down from handle bars I look at the reflector and the lock bit is to one side is this normal if you get what I mean so handle bars and wheel bang on straight but the latch is to one side frome the front reflector
Never mind the reflector. Once everything lines up don’t worry. The latch that has the small screw doesn’t sit 100% straight unless you hold it with your hand when pulling up the black lever. Nothing really to worry about ⚡️
My folding mechansim makes a clicking noise everytime i go over any bumps i tried adjusting things e.g making the fold tighter so it locks better and doing the allingment of the stem. Nothing seems to work, is there a solution to this problem? Please help!
Check all the nuts and screws. Personally, you will get rattles every now and then. Once everything is tight, don’t worry about it. You can if you want, post a video on my FB group so i can have a look to at the scooter making this sound bit.ly/2NMeXIY
Mine started creaking/clicking all the time after about 100-200km, also there's another squeaking noise when going over bumps, I couldn't hear it properly due to the clicking sounds. I tried adjusting the bolt like in the video but it didn't help (even when I tightened it so hard that I could barely lock it). Since it's still under warranty I ended up going to the store, they applied some spray (probably silicone lube) and it stopped the clicking sounds. But now I can clearly hear the squeaking sounds when going over bumps - it's high pitched noise - I can't pinpoint where it's coming from, I'm not even sure it comes from the locking mechanism. I'll try to see if I can video it somehow and maybe call the store. Do you have any suggestions?
@@xellostube adjust as you see in the photo. Plus you can also rub a small bit of silicone spray between the folding mechanism meeting points or some people use black insulation tape.
Would using a threadlocker on the bolts solve this issue more permenantly ? I get these creaking sounds after every 100kms, even after tightning as described..
Hi. No. It’s very common and the only way it can be really prevented is by fitting an X-lock. I done a video on that installation. The creaking/wobbling is caused by the rider pulling/pushing on the handlebars while riding. You have a few other options however if you don’t want the X-lock People use the rubber dampers (In my opinion, these are a last resort) Some people have just used tape in between the folding mechanism. Just type in (Xiaomi M365 creaking on RUclips and you will see their videos) What I have tried and works well also is, after you adjust everything like I do in this video, you can then apply silicone spray with your finger. Just rub it around the edges of the clamp.
Hi Nemanja. I have never used the rubber dampers because I adjust it to stop the creaking/wobbling of the stem. You only need the dampers if the damage is already done. I saw people holding them in place with tape. I would suggest investing in the X-lock for added support, I done the video on that installation and it’s brilliant.
@@Movelectrics it is on place, but when I do the thing with my hand on 6:55 it just pops out on the sides like it's slime but it's just rubber damper The x-lock looks cool but I don't have money to spend on it and it's a lot of work 🥴
I’d like to see exactly what’s happening. Can you post the video here and we can help tiny.cc/eiktqz The X-lock takes 10 minutes to fit and is great. Avoiding stem issues is very important.
My 365 pro 2 snapped in half while i was riding it. It wasn't even 1 year old. Buy a proper one with big wheels and suspension cheaping out on these can get you seriously injured or worse.
I disagree. Xiaomi are good quality but people think they can go off curbs, pull/push on the handlebars using their weight. Lack of maintenance and tightening contributes big time. Also I would suggest getting an X-lock as an addition for stem support. Made a video on this.
My mates Xiaomi Pro 2's handlebar is bent due to a accident he was involved with while being side-tracked. Anyone here know where to buy a spare Xiaomi handle bar or how to bend the handlebar back to place?
Hi Carbune! I would suggest checking your wheel alignment. It’s ok if it is just a small bit but not too much. I done a video on the alignment, have a look 🛴
@@Movelectrics thanks for answering bro. Really apreciate it. I am sad because i did not get to ride my brand new scooter because it wobbles even after screwing and tightening. Still seems to GO back and forth a little when i put pressure on stem while standing on the scooter. Can i send you a video somewhere to have a look and get a proper advice? Thanks a lot!
@@Movelectrics there no stores round me that fix scooters erm wud u recommend me doin me self I have another scooter with the part I need or can u do a video plz mate
If you do this incorrectly, you can end up potentially hurting yourself. I would recommend asking around the local area. I no longer have my Xiaomi scooter. However I did do a suspension mod that shows the order of the bearings 👉🏻 ruclips.net/video/kPvcoipiAhY/видео.htmlsi=x6ddttnD-vkJcDgn
Definitely was a bit longer than it should but I over explain sometimes. It’s an older video of mine when I just started out. Thank you for the watch though and hope it helped ⚡️
Heyo, my xiaomi e-scooter has been having this problem recently, but the model that you have looks different because you have a locking mechanisim on yours, but my e-scooter is just "clip up". No locking. I'm a bit worried that if i follow the instructions in the video it might not apply to my escooter, and damage it. Should I be worried about it being different?🛴
Hi! I’m assuming you have Pro2? Only difference is the latch area where it clips up. Same adjustments apply like in this video. If it’s not addressed, you risk damaging the stem as time goes on and you will need to buy the dampers. Also, you could use silicone spray and apply a small bit where the stem meets ⚡️
@@Movelectrics (thanks for responding fast) Well it's only like 2 weeks old but there isn't a lock for the latch, so it just goes up. I'm assuming that it doesn't change much, but i'm kinda worried about doing it because i've never done anything on the scooter, and since it's different i don't want to damage it. Does having the different model change much?
Your model is the exact same as mine. Maintenance is very important so you will have to do it. I’ve done many videos on things so check them out if you ever need ⚡️
![ROSÉ (로제) - number one girl [더 시즌즈-이영지의 레인보우] | KBS 241129 방송](http://i.ytimg.com/vi/A9oByH9Ci24/mqdefault.jpg)
⚪️ WATCH NEXT
🛴 My latest upgrade for the stem
ruclips.net/video/5Uctq-5s9fM/видео.html
🛴 Xiaomi videos you must watch
bit.ly/35hyUfm
🛴 Xiaomi M365 Pro upgrade videos
bit.ly/37mWNoI
🛴 Xiaomi maintenance videos
bit.ly/31nxsH9
⚪️ Product links in description if you want to upgrade your scoot!
Just bought the pro 2, driven 110 kms and it started squeaking really bad. This fixed the issue, thanks
Good job it’s fixed. Definitely consider getting the X-lock. A done video on it ruclips.net/video/5Uctq-5s9fM/видео.html
Actual fixes start at 2:55, just in case.
Great video. Just solved my creaking issue by tightening the bolt you described. Probably covered around 50 miles on mine so far and literally just had to turn it maybe half a turn just tighten it up and its now silent again.
Glad to hear ⚡️
I took your advice and fixed it properly, no creaking at all and no need for lithium grease or WD40 now 👍
Brilliant well done!!! 🛴
The X-lock is great too.
@@Movelectrics I may try that x lock👍
i was just ashemed going on the street with that noisy creaking sound of my new scooter, sounded just like that being about to snap or something, i just tightened the centrel bolt of the bearing u said, and its so silent again, thanks, WORKS FOR XIAOMI 4 PRO too
I would suggest getting the X-lock to avoid future stem issues (made a video on it)
@@Movelectrics yeah but is it compatible with xiaomi 4 pro?
Thank you so so much! Been recommend your video to my fellow scoot buddies (m365 pro) and your a lifesaver. Very informative and I really hope Xiaomi Company really see this video and how you explain it. God Bless and stay safe.
Makisig the.beagle no worries! I am glad I could help. If we all help each other and give support, our scooters should be absolutely fine for a long time!! Thanks for the comment, really appreciate it!
Scoot safe 🛴
So glad the pro 4 addressed this.
Ultra 4 model is even better!
@@Movelectrics neat! However I got pro 4 for cheap on sale. Very happy with it for how I use it.
You loosened the nut, but didn't re-tightened it in the end, that's a major omission for a tutorial! Anyway thanks for the tips, it helped me solve the creaking sound on my scooter. I'm going to add a 4mm allen key, a 10 spanner and an extra lock to my emergency kit, because I already see mine is a tiny little worn out and that's probably the reason why it started creaking. I try to always ride on smooth surfaces even if I have to take a longer route, but there's always that bad patch of road that can't be avoided...
Hi 🤛🏻 I say at the start of the video to pay attention because it’s very important.
I mention between 4:58 and 5:04 to re-tighten the nut and I also mention it in a pop up text. Safe riding ⚡️
thanks brother you saved me, i can go back to the gym now (far away)
@@JL-ix5yz no worries
Good video! My folding mechanism is a bit wobbly after i fell and i wonder could this adjustment fix it.
Try this method first. Also consider getting the X-lock for added support. Video here ruclips.net/video/5Uctq-5s9fM/видео.html
Mine started to wobble and squeak at 3000km.. thank you for the easy fix!
Nice mileage ⚡️
Thx bro.I believe it helps. Will test it asap.
Tested. No more annoying sound. Amazing bro. 🤟🏼
Hi
Great video! You mentioned you have a video about changing the pin (as mine has snapped). Can you kindly direct me to it.
Regards
I never did did change the pin in the end. No need. Got the X-lock and that supported everything. Made a video on that.
But there are videos out there on the pin replacement. Here is one ruclips.net/video/S05x7NUvd8o/видео.html
Thank you.
It worked, thank you so much, the sound has been too annoying! Lets see how long it lasts before the sound comes back😂
I’d also recommend the X-lock. Made a video on it.
Hey man me again .. sorry to bother you. what is that you are holding at 1:27 in the video where you say if you have snapped one of these in the stem ? what is that ? how do I check to see if mine is OK ? I've ordered the extender and the xlock and I'm watching your previous videos to get my mind ready for the installation once the parts land.. thank god you put these videos up man!! Much appreciated as always
That part I’m talking is the part that I adjust in the video. Some people tend to snap them.
AliExpress have nearly every part you need for Xiaomi scooters.
8:23 Soyuz foyve - eeeeerrrrn…. got it!
Jokes aside fella, this is a great video - you sorted my creaking Pro 2
My accent can sometimes be strong for sure! Even the subtitles don’t make sense sometimes! Glad it’s sorted Phil! I ended up getting the X-lock for added support which I find very good ⚡️
@@Movelectrics I’m of Irish descent myself mate - O’Carroll’s :)
I’m just looking at your other video on the X-lock now.
Subscribed by the way, you’re a natural in front of the camera and there’s no fluff I have to FF through at the beginning of your videos.. informative, well presented and concise. I love it.
And now I’ve sorted my brakes out following your other video tutorial too. Legend
Thanks Phil for the support and feedback! I’m always trying to get better ⚡️
Hi could you tell me if any of the modifications you have done will work on the aovo pro electric scooter as iam interested in the suspension for front and rear and where did you buy that red cable cover please
Not sure about the Aovo models. Best to ask in their FB groups. Different folding mechanisms.
Just type ‘cable protectors’ on AliExpress.
E X T R E M E L Y Important video .... definitely saved (and "liked!")
Thank you for the video!!
Thank you for the support!
@@Movelectrics ABSOLUTELY, no problem!!
Much love brother got her all sorted
That’s great to hear ⚡️
After the pin is removed, can it just be replaced with a M4 bolt straight through. Thanks
No you need the correct parts. Try AliExpress.
hi mate rhank you for your reply cupple days ago i have a question for you my battery is fully charged and my scooter started going slow and i only had it a week i check all over my scooter mantaince and every thing fine is there way telling me what mite be wrong with it many thanks scotty
Join my FB group and post there if you can. Pictures will also be helpful bit.ly/2NMeXIY
look I really appreciated because it really fixed with the first method
No problem ⚡️
Didn't fix it for me - just had to use penetrating lubricant and it fixed the issue
The idea is you adjust it as soon as the creaking starts. Lubricant may stop the noise but there is gradual play in the stem still. It will get worse as time goes on. Some people use the dampers to have a firm stem. I would suggest getting them because it’s definitely not safe having play in that area ⚡️
Where do i put that lubricant tho?
@@Fireish_- ^^
I've liked and subscribed
Welcome ⚡️
Hi, I want to ask something, I bought pro 2 like a week ago and the scooter started to make this cracking sound 30 minutes after it was out of the box, I searched in Google and I found this video, so you have experience with that problem and I want to ask you, should I return my scooter because of that problem or I should keep it , but if every pro 2 does that noise, why should I return it, because the new one will make the same sounds
Hi Emo! Very important not to pull or push the handlebars while riding. This more than likely caused this. It’s common on the Xiaomi to make that noise. Adjust it like I explain in this video and I would also suggest buying the X- lock for added support (I done a video on that also) 🛴
Thank you
Very important not to pull or push the handlebars while riding, so you ride without your hands on the handlebars lol.
The idea is not put too much pressure on the stem. Number 1 cause for this creaking/wobbling.
Fixed it for me thank you mate have subscribed
Fair play man. You can also apply some silicone spray (with your finger) where the folding mechanism meets.
One thing that helped, was the X-lock. Consider getting it at some stage. Here is my video on it ruclips.net/video/5Uctq-5s9fM/видео.html
Hey, just binged watched all your videos lol
What is the part you show at 1:55 used for?
Hi Daniel! This is a reinforced latch that you can replace the stock one with that I adjust in this video. They are only needed if you snap the current stock one. Just avoid jumping, pulling and pushing on the handlebars.
@@Movelectrics got it, ty sir
Thanks a lot for your kind information... it just solved my problem... 🙂
No problem James. Consider getting the X-lock for added support. I done a video on that if interested ⚡️
Hi, I tried adjusting the latch for my rubber dampener but the bar wont stay on. How do I fix this?
Don’t use the dampers ⚡️
Like and subscribed thanks dude your videos are helping a lot I have the pro 2 version and have rattling on the stem video helped thanks 👍🏻
No worries Luke and feel free to ask any questions ⚡️
Hi mate I’ve changed my folding hook but the scooter still folds do you know how I would fix it
Did you snap the original? Can you post a quick video on my FB group and I can help? FB group bit.ly/2NMeXIY
Hey bro I have a Carrera impel S1 escooter and my stem creaks and moves alot but im not sure how to tighten it since it's different to yours
I ain’t familiar with this scooter so check if the stem area is tight. Silicone spray (small amount) is also helpful where the 2 points of the stem meet ⚡️
Hi mate, I need to put a new rear mudguard on my daughters pro2, I've changed one on my aovo no problems at all, but just wandering how do you remove the little supports for the gaurd from the frame of the scooter, where it attaches behind the reflectors?
Hi! If it is the plastic support, you simply pull them out. If it is the metal support, you have to loosen the screws holding the rear wheel on ⚡️
@@Movelectrics thanks pal, I see now the little holes to put a paper clip in to pop the reflectors out. All is good.
Hey dude where do you get the plastic bit you put inside to stop creaking and also the reinforcement bars for the mud guard.. Says it's in the description ? Can't see anything.. I have an MI Pro 2, and it's squeaking like mad... I've attempted the re-adjustment and it doesn't really help, in fact it makes me unable to fold the bloody thing.. The bolt with the 10 size spanner, you can lower it but then the top bot with the 4m Allen key doesn't bring the bolt down to meet that nut. it's pretty pointless on this MI Pro 2.. I absolutely hate it.. Had I known I wouldn't have bought this scooter man.. what you think the plastic may help ? where can I source this from? Thanks again dude.
Hi man
I know this adjustment is tedious, but you literally turn the front screw a mm by mm until it’s firm when closing. Of course loosing the locking nut first inside and re-tighten when finished.
But if there is too much wear and tear, go onto these steps.
Another tip is if you have also creaking, you can smear silicone spray where the folding mechanism meets OR by the dampers that are rubber OR you could even just use gaffer tape.
I would by the way get the X-lock (video linked below for full explanation)
To be honest, I have reviewed so many scooters and almost every single one of them, have stems that need adjusting over time.
Also for all accessories, just type ‘Xiaomi M365 accessories’ into AliExpress.
X-lock video ruclips.net/video/5Uctq-5s9fM/видео.html
@@Movelectrics Ok buddy cheers dude
Great in depth review thank you 👍🏻
Glad it helped! ⚡️
Just subbed you helped me a lot thx
No worries at all ⚡️
Thanks man, works well
Glad it helped! ⚡️
Hi. Hope you can help me. my top nut that your loosened 3:43 came loose and fell out of my scooter. Where can you buy and new nut for me scooter?
You could try a local hardware store. How did it fall out?
@@Movelectrics I don't know how it fell out, was going along and the scooter almost folded on itself.
If it almost folded itself, the latch was not secured and tightened properly. I also done a video on the X-lock installation to prevent this from happening ruclips.net/video/5Uctq-5s9fM/видео.html
@@Movelectrics do you know where you get it as the link on your video is sold out. How much would it cost?
Try Aliexpress. There should be plenty there ⚡️
Have you flashed your pro may I ask, and if so how long have you had it flashed and any issues
Hi! I flashed my Pro over 1 year ago, no issues at all. I would suggest getting advice if you have never done it. I got the CFW from a FB group. What model do you have? Pro original/Pro 2…?
@@Movelectrics I have a pro 2
Thanks for your reply to means alot, I'm on Facebook group but given so many different options some say xiaomiflasher and pay the 6pounds others say many other things
The Pro 2 would be a bit different than my Pro.
There is a site called ‘angryxiaomi’ that is meant to be good for CFW 🛴
Hi the stem on my sons brock it needed welding everything else worked gave it too someone too weld who is saying he's welded it but wheels not working!! Going too pick it up tommorow any info would be great cos I'm going too get fobed off ☹️
Hi Rachel! Why does the stem need to be welded? Did it snap? These scooters are not made for jumping, pulling or pushing on the handlebars. Always need to careful ⚡️
I need more information about the wheels, that is strange! A video would also help. Feel free to post it on my FB group bit.ly/2NMeXIY
ThaNk You, you helped me out....I still had a tiny bit of play but Nothing like it was....I'm going to Order the shims that should make it perfect
Hi Kamp! Good job! Don’t use the shims, they are a last resort if too much damage has being done. Don’t pull or push on the stem while riding. The X-lock is brilliant, it can reinforce that whole area. I done a video on it 🛴
@@Movelectrics Yes I am going to pick one p but besides look good what do they do.....???
@@Movelectrics What about Doubling the Battery Capacity ??? I have not seen any Videos from you about that
I’m quite happy with the range, I plan on possibly reinforcing the controller in the future 🛴
@@kampnexxtv3547 just done it best desiring I made
Thank you a lot
No problem at all ⚡️
your scooter is beautiful with all those red bits on it mate. where can i buy it?
Hi Daniel! My latest video actually goes through all the upgrades and the links are in that video description to buy them. Here is the video if you want to watch ruclips.net/video/AGOoGUKYrNk/видео.html
Can you help me? When i touch the front bolt, the long thing between the bolt and the clock nut (minute 4:39 ) Would not turn with it. I have the Xiaomi Pro 2 with the new folding mechanism where you just pull up without turning the plastic thing around the stem
Loosen the lock nut first ⚡️
@@Movelectrics Yeah but even after loosening it the rotating part would still not come down
Did you try turn the turning that part with a 10mm spanner? Try a small bit of WD40 also.
@@Movelectrics i will try to turn that separately with a 10 mm spanner then
@@Movelectrics Just came back home after a test ride, you are such a lifesaver man.... My scooter is finally silent again!! Greetings from Italy!
great video🙂
Cheers man ⚡️
Hey hope you can help me explain but for this part 10:04 how there is the front but where the bolts are and there is a line separating the top and bottom yea well my one is uneven and idk how to fix it
Edit: just where you are pointing at
Hi Slavic. It’s a not an important adjustment but I think it is best when there is a similar gap on both sides to avoid stress.
All you do is position it center with your hand like I show in the video. Then pull up the latch to secure the stem. I would suggest getting X-lock for added support. I done a video on that installation 🛴
@@Movelectrics ok thanks
Legend👍
Glad it helped 👊🏼
It worked.
Happy days
Thanks man I needed this video! 👌
No worries! I had to adjust mine just after 100km! All good now👌🏻
Clear Learning Your the only youtuber who actually reply’s 👌 Best youtuber ever!
Thanks very much for the support! I’m after upgrading the scoot today, wait for that video! Probably the best upgrade yet!
Clear Learning I can’t wait 👊
Thanks it helpt
Hey mate i got 2 questions. For the main screw that controls the steering angle in the middle, mine is super tight and doesn’t want to move at all. Is this a problem? I didn’t want to force it so i just left it as it is. And for the nut that goes up and down, i can screw until its tight then it pretty much can’t be tightened anymore. Should it be left a little bit loose or tight enough without applying lots of force?
Great video tho! My latch seemed quite tight and had to put quite a big of energy to put it up. I also have a creaking sound, will have a ride tonight and see whether the sound is gone
@@keeaan6895 main screw in the middle is only for steering alignment or when fitting suspension. The nut you can leave just a little bit loose (literally a hair)
Also some people apply silicone spray where the folding mechanism meets. I spray some on my finger and rub around.
I would consider the X-lock for added support. I done a video on that.
I’ll have a look at that x-lock. Thanks for the info man! I appreciate the fast reply as well. Great content creater, keep it going 💪
@@keeaan6895 thank you for the support 👊🏼
So I’ve adjusted the folding mechanism perfectly, lubricated the mechanism and all on my 1s. Now i’ve bought the dampeners but they don’t even fit. It should make a click and fit into place when i put the stem up but it doesn’t and then unable to close the latch. Can’t seem to get rid of the creaking noise at all, it just keeps coming back. Feel like bringing the scooter back via guarantee
Is the first adjustment recommended for xiaomi pro 2 ? Even if it's not creaking? Like can I do it to prevent the creaking sound ?
If there is no creaking sound/wobble, then leave it alone for now 👍
@@Movelectrics Ok man. Thanks
Thanks
No problem ⚡️
Hey man, mine was bumped into a fence while I was on holiday by my brother and now it requires a lot more effort to turn it left and right, why is it so stiff??
Hard to say. Would require it to be disassembled. Bearings could be damaged for example.
@@Movelectrics where would i go for that?
There's no need to disassemble and adjust the whole thing, can just either use the silicon damper pad on that place or use some wd-40 lube it will stop creaking immediately.
I don’t disassemble anything, simply adjust and will take just a couple of minutes.
Like I mention, the silicone dampers are used as a last resort and WD-40 definitely ain’t the best. Silicone lubricant is.
My solution? Adjust first like in this video, then simply buy the X-lock (made a video on that)
Problem solved.
Does this work for a xiaomi essential
Yes it does ⚡️
Hi just wondering if you can help me just got the xiaomi s1 the steering feels stiff what do I need to lose to sort this out
Hi Jamie
More than likely the middle bolt (located in the middle when you fold the handlebars) is too tight. Loosen that a really small bit until you are happy. Don’t loosen it too much as this aligns your steering and pulls the bearings together ⚡️
@@Movelectrics thanks for the reply love your vids one last question if you can help me that locking bit at the front when my handles bars are lines up straight and my wheel also straight and look down from handle bars I look at the reflector and the lock bit is to one side is this normal if you get what I mean so handle bars and wheel bang on straight but the latch is to one side frome the front reflector
Never mind the reflector. Once everything lines up don’t worry. The latch that has the small screw doesn’t sit 100% straight unless you hold it with your hand when pulling up the black lever. Nothing really to worry about ⚡️
My folding mechansim makes a clicking noise everytime i go over any bumps i tried adjusting things e.g making the fold tighter so it locks better and doing the allingment of the stem. Nothing seems to work, is there a solution to this problem? Please help!
Check all the nuts and screws. Personally, you will get rattles every now and then. Once everything is tight, don’t worry about it. You can if you want, post a video on my FB group so i can have a look to at the scooter making this sound bit.ly/2NMeXIY
Hey, i sent the video on messenger
Thanks for the reply
Ok I will have a look ⚡️
Thanks so useful
Glad it was helpful!
The X-lock is a good investment to strengthen the stem, very easy to install.
Plz reply do you need how to fix my handlebar because I fell now it turns all the way around
Know*
Hi! Can you pose a video to my FB group so I can see exactly what happened? bit.ly/2NMeXIY
Ok will do tomorrow
@@Movelectrics trying to join its pending
Just accepted ⚡️
Mine started creaking/clicking all the time after about 100-200km, also there's another squeaking noise when going over bumps, I couldn't hear it properly due to the clicking sounds.
I tried adjusting the bolt like in the video but it didn't help (even when I tightened it so hard that I could barely lock it).
Since it's still under warranty I ended up going to the store, they applied some spray (probably silicone lube) and it stopped the clicking sounds.
But now I can clearly hear the squeaking sounds when going over bumps - it's high pitched noise - I can't pinpoint where it's coming from, I'm not even sure it comes from the locking mechanism.
I'll try to see if I can video it somehow and maybe call the store.
Do you have any suggestions?
More than likely they applied silicone spray where the folding mechanism meets.
Post a video on my FB group if possible about the noise bit.ly/2NMeXIY
Do these methods also apply to the xiaomi 1s scooter
Hi! Yes absolutely! They are all the same 🛴
Hi mate how do I check how many miles I have done on my xiaomi Pro 2
Hi Luke. Use an app. There are many for Android and iOS 🛴
Thank you!!!!!!!!!!!!!!!!
No problem Taky! ⚡️
When i get stuck in rain with my xiaomi scooter the bar does not make crackling sound but when its dry it makes
Adjust like you see in this video. Also you can rub some silicone spray with your finger between the folding mechanism.
mine keeps squeaking... any solution?
@@xellostube adjust as you see in the photo. Plus you can also rub a small bit of silicone spray between the folding mechanism meeting points or some people use black insulation tape.
Would using a threadlocker on the bolts solve this issue more permenantly ? I get these creaking sounds after every 100kms, even after tightning as described..
Hi. No. It’s very common and the only way it can be really prevented is by fitting an X-lock. I done a video on that installation.
The creaking/wobbling is caused by the rider pulling/pushing on the handlebars while riding.
You have a few other options however if you don’t want the X-lock
People use the rubber dampers (In my opinion, these are a last resort)
Some people have just used tape in between the folding mechanism.
Just type in (Xiaomi M365 creaking on RUclips and you will see their videos)
What I have tried and works well also is, after you adjust everything like I do in this video, you can then apply silicone spray with your finger. Just rub it around the edges of the clamp.
I’ve done 250km with my Xiaomi 1s and idk, is that bad?
Not bad at all ⚡️
Can u please answer why does my rubber damper pop out ???
I can send u image on instagram if you don’t understand what I mean
Hi Nemanja. I have never used the rubber dampers because I adjust it to stop the creaking/wobbling of the stem. You only need the dampers if the damage is already done. I saw people holding them in place with tape.
I would suggest investing in the X-lock for added support, I done the video on that installation and it’s brilliant.
@@Movelectrics it is on place, but when I do the thing with my hand on 6:55 it just pops out on the sides like it's slime but it's just rubber damper
The x-lock looks cool but I don't have money to spend on it and it's a lot of work 🥴
I’d like to see exactly what’s happening. Can you post the video here and we can help tiny.cc/eiktqz
The X-lock takes 10 minutes to fit and is great. Avoiding stem issues is very important.
The bar snapped on mine it literally only a month old I’ve the new part there and tried to take the new bar out so I can replace but can’t get it out
Are you talking about the pin? For the locking latch?
@@Movelectrics my pin broke how do I get it out ?
You need to hit it out. Have a look here ruclips.net/video/IYitMzkPOLQ/видео.html
My 365 pro 2 snapped in half while i was riding it. It wasn't even 1 year old. Buy a proper one with big wheels and suspension cheaping out on these can get you seriously injured or worse.
I disagree.
Xiaomi are good quality but people think they can go off curbs, pull/push on the handlebars using their weight.
Lack of maintenance and tightening contributes big time. Also I would suggest getting an X-lock as an addition for stem support. Made a video on this.
My mates Xiaomi Pro 2's handlebar is bent due to a accident he was involved with while being side-tracked. Anyone here know where to buy a spare Xiaomi handle bar or how to bend the handlebar back to place?
I would get a new one, try AliExpress 🛴
@@Movelectrics Sweet! 👍
Scoot safe 🛴
@@Movelectrics Stay safe over there! 😁
Is it just mine or the steering angle to the right is higher? I can steer more to the right than left, is it normal?
Hi Carbune! I would suggest checking your wheel alignment. It’s ok if it is just a small bit but not too much. I done a video on the alignment, have a look 🛴
@@Movelectrics thanks for answering bro. Really apreciate it.
I am sad because i did not get to ride my brand new scooter because it wobbles even after screwing and tightening. Still seems to GO back and forth a little when i put pressure on stem while standing on the scooter. Can i send you a video somewhere to have a look and get a proper advice? Thanks a lot!
Feel free to join my FB group and post the video there bit.ly/2NMeXIY
There is meant to be a tiny bit of play in the handlebars. But literally a tiny bit. Post a video on the FB group 🛴
My scooter stem goes all way round I think the thing that stops it has Broken any help to fix this please 🙏
Sounds like you damaged the internal washers/locking spacers inside the column.
@@Movelectrics do I need too replace it how do I fix plz is it expensive
@@Parko1987 needs to be disassembled. If you don’t want to do it yourself, bring it to a local store.
@@Movelectrics there no stores round me that fix scooters erm wud u recommend me doin me self I have another scooter with the part I need or can u do a video plz mate
If you do this incorrectly, you can end up potentially hurting yourself. I would recommend asking around the local area. I no longer have my Xiaomi scooter. However I did do a suspension mod that shows the order of the bearings
👉🏻 ruclips.net/video/kPvcoipiAhY/видео.htmlsi=x6ddttnD-vkJcDgn
👍
You are welcome 👊🏼
Is there a reason why the handlebar has to be detached when you adjust? It seems a lot easier if it was up.
Hi Jee. That’s my way of doing things but by all means, if you prefer a different way that you feel comfortable with, then do that 🛴
tried this for 2 straight hours no fix
@@ashton9921 literally minor adjustments needed but if it is too badly worn, you can also use some gaffer tape between the latch
i'm on the right video, but the question is, can I fix the problem on my scooter lol
If the problem has just started, absolutely an easy fix!
My god this was painful, this video could have been less than a minute
Definitely was a bit longer than it should but I over explain sometimes. It’s an older video of mine when I just started out. Thank you for the watch though and hope it helped ⚡️
It didn't work for me😔, please help me out. The crack sound isn't normal anymore.
I will need to see a video. Feel free to join my FB group and post it there bit.ly/2NMeXIY
What kind of language is this? Very hard to understand. Sorry.
niterunner I speak English but I’m Irish so sometimes my accent can be hard for people to understand.
Use the subtitle option 🛴
Really love the way you speak mate
Glad you understand the Irish accent!
Heyo, my xiaomi e-scooter has been having this problem recently, but the model that you have looks different because you have a locking mechanisim on yours, but my e-scooter is just "clip up". No locking. I'm a bit worried that if i follow the instructions in the video it might not apply to my escooter, and damage it. Should I be worried about it being different?🛴
Hi! I’m assuming you have Pro2? Only difference is the latch area where it clips up. Same adjustments apply like in this video. If it’s not addressed, you risk damaging the stem as time goes on and you will need to buy the dampers. Also, you could use silicone spray and apply a small bit where the stem meets ⚡️
@@Movelectrics (thanks for responding fast) Well it's only like 2 weeks old but there isn't a lock for the latch, so it just goes up. I'm assuming that it doesn't change much, but i'm kinda worried about doing it because i've never done anything on the scooter, and since it's different i don't want to damage it. Does having the different model change much?
Your model is the exact same as mine. Maintenance is very important so you will have to do it. I’ve done many videos on things so check them out if you ever need ⚡️
@@Movelectrics Ok, thanks for clearing that up!
@@chowderfish Hi mate, I also don't have the "clip up" on my e-scooter same as you, if you tried his metod, can you tell me if it works?
Thanks
No worries at all ⚡️