Paper feed motor does not stop. The PF encoder sensor cannot detect the rotation of the Paper feed motor. Release the release lever at the back of the Paper tray and remove the jammed recording paper in Jam clear cover part, Platen part and front part. 1 Foreign materials in the recording paper feeding path Remove foreign materials. 2 Paper feed motor harness connection failure Reconnect the Paper feed motor harness. 3 PF encoder sensor harness connection defective Reconnect the PF encoder sensor harness. 4 PF encoder disk defective Replace the PF encoder disk. 5 PF encoder sensor defective Replace the PF encoder sensor PCB ASSY. 6 Paper feed motor defective Replace the Paper feed motor. 7 Main PCB defective Replace the Main PCB ASSY.
hey, i couldn't understand but i was able to fix my printer thanks to you💟
You are welcome 😊
Very Good Sir plz keep it up for helping others
Thank you, I will
Same pricess ba ito sa dcp j100 boss?
No need to disconnect the printer?
Bahut accha hai, thanku
Buenos días bro, me puedes decir aquí los paso para resolverlo?? Te lo agradecía mucho
hi sir mara printer dcp T700W hai
"prinet Unable BF " Dikha raha hai uska kya sloution hai.. plz. batovo.
Paper feed motor does not stop. The PF encoder sensor cannot detect the rotation of the Paper feed motor.
Release the release lever at the back of the Paper tray and remove the jammed recording paper in Jam clear cover part, Platen part and front part.
1 Foreign materials in the recording paper feeding path Remove foreign materials. 2 Paper feed motor harness connection failure Reconnect the Paper feed motor harness. 3 PF encoder sensor harness connection defective Reconnect the PF encoder sensor harness. 4 PF encoder disk defective Replace the PF encoder disk. 5 PF encoder sensor defective Replace the PF encoder sensor PCB ASSY. 6 Paper feed motor defective Replace the Paper feed motor. 7 Main PCB defective Replace the Main PCB ASSY.
Modem communication failed.
Remedy: 1 MJ PCB harness connection failure Reconnect the MJ PCB harness. 2 MJ PCB defective Replace the MJ PCB ASSY. 3 Main PCB defective Replace the Main PCB ASSY.
In my printer this message "param init end" anything can a help me??
It is not working in my T300 printer
Bhai mere kholna batadiya band krna bhi toh batade lag ni raha hai ab ye
Sir.. How to solve Init Unable 4F for DCP-T300 Printer????
Brother dcp t310 printer Scaner cable kahase milega?
Desde Perú, gracias lo hice tal como esta en el video y resolví el problema. Gracias.
Sir. Please help me. How to fix "Init Unable 8F" on DCP T300? Thanks in Advance.
ok
Respected sir please explain error 48
Thank you
You're welcome
init unible af nahi ja raha? kai kare
int unable A7 Brother DCP-T300 how to fix
Voice is very low
I wish you can say it in english.
again INIT Unable 4F problem
Can you explain it in english?
ok i will tray