My printer still does not have yellow and black even after soaking the printhead with water...Will replacing the printhead definitely fix the issue? What are my chances po?
Thanks sa Video it worked. i washed it with cleaning solution soaked for about 5 minutes ,blower it then pump and suction the hose. Nozzle Check are complete.
Naging okay ang print ng colored dati may guhit print ng akin 3times ko ginawa procedure nayan hangga maging okay and print chagaan lang sa cleaning pag di nakuha linis ulit sa tubig gumamit ako ng maligamgam na tubig so far wala nasira basta gumamit kayo ng blower at make sure na tuyo tlga, salamat kay sir na nag upload auto subscribe here
boss ask ko lng ung 3 times mo ilan minutes or hours interval? wala kcng black lumalabas skn . naubosan kc ink tas un head mini tank nya ngsuction ako wala mhigop o walang laman ink kya ginawa ko nilagyan ink tas bnlik ko pero wala p din mukhang natuyo eto na last option kpg wala prn sayang kc good colored e
May i ask a rofessional opinion. I'm looking for an wireless ink tank printer which brand should I get among these three. Which will benefit me for a long run in it's rugerdness for at least 2/3 years? canon G series HP 415 brother T420w/520W
i dont recommend using any kind of water, that printer head are MEMS, better use 70% IPA(isopropyl alcohol), not the one used in rubbing alcohol, use the USP one
que tal buen dia amigo haber si me puedes ayudar con esto, te platico, hace algun tiempo me trajeron una brother mfc-T4500 que la llevaron con un tecnico y que no le encontro nada y pues el cliente la recogio y me la trajo yo aqui como le habian metido mano pues desarme desarme totalmente para poder revisar los sensores de atras el que va, debajo de la platina y pues para verlo hay que desarmar todo el equipo revise limpie y todo en orden cheque en modo servicio el que funcionaran y pues pasaron la prueba pero el canijo equipo no salia de ese falso atasco, ahorita tengo una mfc-6540 bañada en tinta la desarme lave arme y todo bien sin problemas mande a imprimir el patron y pues no salia bien le di una lavada manual al cabezal lo quite y lo lave volvi a armar al intentar probar ya me manda el mensaje de atasco enfrente o atras a alguuien le a pasado que me pueda ayudar a superar este escollo en el que se quedo metido el equipo, saludos
Cómo estás? Seguro es debido a que está mal puesto el encoder, esa impresora tiene dos encoder y van enganchados debajo del cabezal, hay que abrir una apertura e insertarlos
I am sorry that I cannot agree with the procedure because it is very risky to wash it with water internally. Thanks for taking the time to make the video and I also have experience repairing printers.
Excellent video, on my brother DCP T700W printer the message "Impossible to print error 48" appears, they told me to change the head or the procedure that you do can solve it, thanks for your answers
I have followed the way you did but after I assembled it, the print head stopped in the middle and a paperjam warning appeared, only printing a few sentences on the check nozzle
T720 brother ung printer ko and may error din po na 48. Sabi palit printerhead na din po. Personal use ko lang po ung printer namin and halos wala nasa 500 to 700 pages pa lang po ata ang na print. May shop po ba kayo around manila? Di ko po kasi kayang gawin ung nasa video. 😢
Peace be upon you. Thank you, my brother, for this information. If it is possible, my brother, to make a video on how to remove the main power supply board for the T7200W printer.
Amigo, tengo un problema con esta impresora, no me gira el mecanismo que arrastra el papel, y por ende indica que no tiene papel. Se queda ahi y no toma hojas. Los pickups roller no giran
Nagpiprint naman po yong printer ko kaso kailangan every print kailangan galawin ang print head kasi na siksik sa gilid. Ano po kaya problema nito sir? @ChinitoLegacy
Nice video. But i have a problem. When i doing cleaning print head with software, the printer doesnt take the ink. I dont know for what, anyone have this problem?
I have a DCP-T300 model printer. The printer head is damaged. Currently, this model head not available in our country. Now I want to know, can I replace the DCP-T310 model head in my printer or which model head will be suitable. Thanks
Nakita ko na po pala problema boss after ko po mag head cleaning. napansin ko pala na halos lahat po ng kulay ng tube kulay itim at chineck ko na po mismong pinanggagalingan ng ink, nabutas na po pala Yung likuran ng ink cartridge gawa po Kasi siya sa plastic kaya po tumagos Yung kulay itim dahil din po siguro sa pagkaluma ng printer.
My brother printer inks becomes all black after cleaning thru the printer icon several times. The tank and pipes were all black. How to resolve this problem sir?
The error code 30 and the error message “Unable to Print” indicate that the printer is not able to print due to a mechanical malfunction. Another possible reason for this error to occur is an object getting stuck in the machine, for example a paper clip or a piece of paper.
Brand New Printerhead available here 👇
🛒 shope.ee/6zwPZWnlau
How about Ink Tank for DCP-T500W, dou u have one?
Which water is used
My printer still does not have yellow and black even after soaking the printhead with water...Will replacing the printhead definitely fix the issue? What are my chances po?
Ahahaha magbebenta pala ng head ito after magturo ng maling pagcleclean ng head
ganito sana.. very detailed ang pagbaklas at pagkabit...Nice Bossing...
Thanks sa Video it worked. i washed it with cleaning solution soaked for about 5 minutes ,blower it then pump and suction the hose. Nozzle Check are complete.
Great 👍
Naging okay ang print ng colored dati may guhit print ng akin 3times ko ginawa procedure nayan hangga maging okay and print chagaan lang sa cleaning pag di nakuha linis ulit sa tubig gumamit ako ng maligamgam na tubig so far wala nasira basta gumamit kayo ng blower at make sure na tuyo tlga, salamat kay sir na nag upload auto subscribe here
Maraming salamat po sir ❤️
boss ask ko lng ung 3 times mo ilan minutes or hours interval? wala kcng black lumalabas skn . naubosan kc ink tas un head mini tank nya ngsuction ako wala mhigop o walang laman ink kya ginawa ko nilagyan ink tas bnlik ko pero wala p din mukhang natuyo eto na last option kpg wala prn sayang kc good colored e
Okay din poba ito gawin sa brother MFC-J200 model?
Galing no sir. Napakadetailed ng video. Sana maayos ko na printer ko at masundan ko ng maayos. 😁
Maraming salamat po ❤️
Sir ano po gagawin pag patlang patlang yung ink sa tube?
Gamit ka po syringe tapos higopin nya muna sa printerhead na tube
Sir paano yong wala talagang ink na lumalabas
@rudz1tvofficialchannel751 baka clogged po yung ink sa tube? Na try mo po head cleaning software muna?
100% Effective 👍👍👍salamat sir👏👏👏
My pleasure to help po
muy buen video mi amigo una consulta ese que lo pones a lavar es agua o es algún otro liquido
How many pages can the printer head do, before replacing. Thanks.
May i ask a rofessional opinion. I'm looking for an wireless ink tank printer which brand should I get among these three. Which will benefit me for a long run in it's rugerdness for at least 2/3 years?
canon G series
HP 415
brother T420w/520W
Haven't yet tried hp and canon.. based on my experience i am satisfied enough with brother and epson printers
use Brother . less headache
After clean with water, his change with new printhead 😁
Nope, you're not a technician i guess
Goodday sir.. ung ganito method ubra po ba sa unable 48 sir? Salamat s sagut po in advans.. more videos po.ty
Galing nyo po. Ito hinahanap ko
i dont recommend using any kind of water, that printer head are MEMS, better use 70% IPA(isopropyl alcohol), not the one used in rubbing alcohol, use the USP one
Distilled water can be used too, as long as it is dried well
Did u clean with water or soultion
Water, i highy suggest using distilled drinking water
que tal buen dia amigo haber si me puedes ayudar con esto, te platico, hace algun tiempo me trajeron una brother mfc-T4500 que la llevaron con un tecnico y que no le encontro nada y pues el cliente la recogio y me la trajo yo aqui como le habian metido mano pues desarme desarme totalmente para poder revisar los sensores de atras el que va, debajo de la platina y pues para verlo hay que desarmar todo el equipo revise limpie y todo en orden cheque en modo servicio el que funcionaran y pues pasaron la prueba pero el canijo equipo no salia de ese falso atasco, ahorita tengo una mfc-6540 bañada en tinta la desarme lave arme y todo bien sin problemas mande a imprimir el patron y pues no salia bien le di una lavada manual al cabezal lo quite y lo lave volvi a armar al intentar probar ya me manda el mensaje de atasco enfrente o atras a alguuien le a pasado que me pueda ayudar a superar este escollo en el que se quedo metido el equipo, saludos
Cómo estás? Seguro es debido a que está mal puesto el encoder, esa impresora tiene dos encoder y van enganchados debajo del cabezal, hay que abrir una apertura e insertarlos
It is absolutely not necessary to remove the printer body for this entire procedure. Just remove the flat cap and slide the carriage to the left
is it proven effective? Can you please make a video about it so we can follow the steps
Is this procedure suitable for the printer type (brother mfc-j480dw) Thank you for replying
I'm not sure bro
I am sorry that I cannot agree with the procedure because it is very risky to wash it with water internally. Thanks for taking the time to make the video and I also have experience repairing printers.
Can you upload your alternative way of cleaning the print head of brother printers. We'll be watching
Excellent video, on my brother DCP T700W printer the message "Impossible to print error 48" appears, they told me to change the head or the procedure that you do can solve it, thanks for your answers
I think you should listen to them
why brother printer and epson so expensive the price of the head ? but HP, CANON its so affordable with the head/catridges
Printhead flexwire or printhead board
Sir kapag may natanggal po bang parts sa printer head delikado? Baka pwede po mag ask
hello, is this cleaning can fix the printer head problem can automatically off the printer?
I have followed the way you did but after I assembled it, the print head stopped in the middle and a paperjam warning appeared, only printing a few sentences on the check nozzle
Clean the board above the printerhead
hi! pano po ayusin yung may roller mark (hindi ink) pag nag piprint sa photopaper??. DCP-T420W po printer.
Thank you very much God bless you
Sir pwede po ba ito sa MFC-J200?
Yes po
Boss, maaayos ba ng ganitong procedure ang print unable 48 sa brother dcp t710w? Thank you.
That error advices to replace printer head, you can try my method
i have brother j315w i have replaced head print but i get stuck on black screen and warning light always what should i do please ?
hola excelente video este procedimeinto puede solucionar el problemas de "imposible imprimir error 48" gracias por las respuesta
Is this method suitable for DCP J105 ?🙄
Not recommended washing printhead with water, it can cause damage and shortcircuit. Base on my experience.
Just make sure to dry it well or use distilled water when cleaning
T720 brother ung printer ko and may error din po na 48. Sabi palit printerhead na din po. Personal use ko lang po ung printer namin and halos wala nasa 500 to 700 pages pa lang po ata ang na print. May shop po ba kayo around manila? Di ko po kasi kayang gawin ung nasa video. 😢
Sultan kudarat po location ko
sir may shop ba kau? pwede magpagawa ng brother printer dcp j105?
Yes po sultan kudarat
Peace be upon you. Thank you, my brother, for this information. If it is possible, my brother, to make a video on how to remove the main power supply board for the T7200W printer.
your magenta print test still missing few block. it still require new printhead
Sir, ano po yung liquid na ginamit niyo sa cotton? alcohol po ba iyon?
Isopropyl alcohol po bro
@@chinitolegacy thankyou po 😊
anong ink n black nito? pigment dba? 6000 kc un 60 bk dye ink dba?
Bu işlemden sonra 48 hatasını vermedimi. teşekkür ederim .
Sir ask ko lang po ano po ang gagawin ka pag ang error ng dcpt170w na printer is room temp is too high ..sana masagot niyo
Amigo, tengo un problema con esta impresora, no me gira el mecanismo que arrastra el papel, y por ende indica que no tiene papel. Se queda ahi y no toma hojas. Los pickups roller no giran
Hi gagana rin po ba yan sa ibang model ng brothers yung akin po kasi is DCP-T720DW
And another question po ano po gagawin sa printer kung hindi nya kinakain yung papel lagi po paper jam yung nakalagay, thank you po sa sagot
Yes po halos same sila structures, may video po ako ng dcp t720 dito sa channel ko po
Meron po ako video ginawa sa channel ko
عاشت ايدك ❤
what is liquid you used to clean it ?
Distilled water
Thank you. It works 👍
Nice bro
Eu uso álcool isopropilico que evapora rápido e seca!
Pwede rin kaya alcohol ipang hugas bossing?
Commonly used alcohol di po pwede
Salamat boss
Thank you very much! it helped a lot! I did it step by step, especially in the final step in the commands in the configuration panel.
My pleasure
How to do the command on t420w? Please help
Is it safe to wash it with water?
Yes, i highly recommend to use distilled water and make sure to blow it dry after
Thank you bhaaya
My pleasure
What solution do you use to clean the print head with? Like what is the liquid that you are using?
Distilled water
BROTHER 525 KA PRINTER HEAD KAHAN MILEGA..
thank you
You're welcome
EXTRAORDINARIO, EXCELENTE, NO REQUIERE PALABRAS
Nagpiprint naman po yong printer ko kaso kailangan every print kailangan galawin ang print head kasi na siksik sa gilid. Ano po kaya problema nito sir? @ChinitoLegacy
Nice video. But i have a problem. When i doing cleaning print head with software, the printer doesnt take the ink. I dont know for what, anyone have this problem?
ok ba cleaning solution ?
Isopropyl alcohol po ba?
Pwede po ba to sa 710w
Yes po
why you disassemble all parts you just need to disassemble the upper part of head to clean it
pede ba toh sir sa autoshutdown 🥺 or need kuna mag palit ng printer head 🥺
Baka faulty po power supply nyan
pag naka angat po ung scanner ko may power naman sir.
Baka naipit flex cable nya bro
Wala na po bang Pisa Jan SA loob bang print head na ika Saira Kung eh loblob
Meron, kaya need patuyuin ng mabuti gamit hair blower
@@chinitolegacy encoder strip location? Means inside head or outside
pwede din kaya ito sa Brother J100?
Yes po, make sure lang to dry it well after
I have a DCP-T300 model printer. The printer head is damaged. Currently, this model head not available in our country.
Now I want to know, can I replace the DCP-T310 model head in my printer or which model head will be suitable.
Thanks
I'm not sure. Maybe they're not the same
how to fix "cannot print 30" brother dcp-t420w po?
Same po tayo ng printer kaso yung problema nung akin is yung Red, yellow, at Blue kulay itim dun sa Print Quality Check ano po kaya problema?
Baka nagkamali po ng refill sa tank ng ink color
Nakita ko na po pala problema boss after ko po mag head cleaning. napansin ko pala na halos lahat po ng kulay ng tube kulay itim at chineck ko na po mismong pinanggagalingan ng ink, nabutas na po pala Yung likuran ng ink cartridge gawa po Kasi siya sa plastic kaya po tumagos Yung kulay itim dahil din po siguro sa pagkaluma ng printer.
@zirdmagnum5200 ayun! Good job po boss.
Thanks
Printer head po ba Yung problem pag may mga guhit guhit pag naga print hoping po masagot plan ko ksing linisan din yung brother printer
Yes po, try po muna kung kaya ma fix sa ink flushing before mag try sa hardware repair
Ink flushing my tutorial ka po para dun?
Risky ng procedure po.. kasi mababasa yung board sa printhead. Pwede naman siguro ibabad sa solution yung printhead. Sa ganon safe yung board
Yes po. use distilled water or cleaning solution lang po, then make sure na mapatuyo ng mabuti
Following your step my Head not working now
nasa magkano po kaya printhead ngaun? plano ko kase palitan ung printhead ng t720dw ko.. sna mapansin nyo po
1k plus po ata
Kapag gasgas na ang nozzle, kahit anong procedure wala na tlga,
I agree po
Location nyo po sir?
Good
Terbaik
Me ajudou de mas no processo de desmontagem !
My brother printer inks becomes all black after cleaning thru the printer icon several times. The tank and pipes were all black. How to resolve this problem sir?
Disassemble the printer and drain and wash the printerhead, tank and tubes properly
@@chinitolegacy no need to replace the tank sir?
brother t510w print unable 30
The error code 30 and the error message “Unable to Print” indicate that the printer is not able to print due to a mechanical malfunction. Another possible reason for this error to occur is an object getting stuck in the machine, for example a paper clip or a piece of paper.
mga lods baka alam nyo pwede gawin, auto shutdown ang unit after mag initialize, may napanuod ako printerhead ang pinalitan
Nakakapag print pa ba sayo bro?
ok
😂 I lost all the colors after doing this...ink stopped to flow.
Ink flushing before printing
Clean maintenance no not proper visual, please write the no (maintenance)
Какой ужас! Что конструкция принтера, что варварский ремонт!
Not recommended
Good