For those who don't understand: you can touch the edges of the drum near the gears, that part is not involved in the printing process. do not touch the central part of the drum unless you are wearing clean gloves.
Thank you, I just cleaned our company's printer and it works perfectly! Your video saved us! (Considering that my boss planned to get a new printer because there was a sticky substance on the drums...)
At a previous job, I used to do a very similar thing to a commercial sized Xerox copier. We would run so much paper through those machines it would take no time at all until the paper started streaking badly.
Very useful and practical video. Had a question. If there are bands of color toner on the transfer belt, is it a drum problem or transfer belt issue? I cleaned the transfer belt, but when I I print again after cleaning the belt, it shows up again on the transfer belt and also on my print. Any suggestions?
Thank you so much@@viandant5 for your feedback. Appreciated that. Is the viper blade something that I could replace or just replace the transfer belt? It is a OKI 920 wt printer.
@@georgezachariah8332 Yes it could be replaced but I think it's difficult to find. May be on alibaba. However without checking the printer I can't be sure
Hello- I replaced the transfer belt and I am still getting the bands of color toner on the transfer belt. Can you think of anything or have any further suggestion? @@viandant5
Electrical contact circuit cleaner spray contains isopropyl alcohol . It also evaporates very quickly and you can get it from most Car Spares Stores Shop's. Just a thought if you can't easily buy the bottle version
thank you for the video........I have recently moved to a new place, my old xerox laser jet starts printing dark shadow on both edges of the paper. Will this solve the problem?
Used by wife's nail polish remover which is isopropyl palmitate. It removed the green coating from the drum and ruined my drum. lol. Time to buy a new one
@ same lol. Mine was about 7 years old and thousands of pages so probably needed another one anyway 🤷♀️. I did come here and got the opposite of help though 😅
Hi! first of all thanks for the videos, very helpfull. 👌🏽 I have a problem with my brother l5100 dn. Its printing dots in the center of the page. When i started the duplex print, the front page is perfect but in the back starting to appear some dots. Then in the next one seems to accumulate the dots. The problem increase whit more printed pages, the back pages have more dots than the front ones. I allready clean the drum with 40% restant of life and bought a new original toner. At the extremes the fuser looks wrinkled, could be that? Thanks!
@@viandant5 Yep, the pressure fuser roller has a fold that goes through the entire roller. I clean also the fusor film and the interior. This is a second hand printer (20.000 pages) with no maintenance at all. I think the problem started when the residual toner started to fall into the printer, since the container was full. Took the bearings and I spent like 1 hour removing all the toner they had inside. Maybe these clogged bearings caused the roller fold, because with 20,000 impressions they shouldn't fail yet, should they?. I installed the same cleaned pieces and improve the quality, but the still appearing when i used the duplex function, perhaps the pressure roller is enlarged by the heat of the fuser. Thanks for answer!
Hi I'm trying to resuscitate a Samsung CLP356W printer after few years of no use. Cleaning the drum as per your instructions works ok initially but rotating the drum it gets very dirty again (toner powder not grease or else) and it keeps like that even rotating several times.Is it normal or should I assume the drum unit is too dirty inside and needs to be replaced? Thank you for help.
Hi , I need to help I have been do every think you say it in the video then when i turn the printer on there is message say "Install the Imaging unit" and i have tay every and still like that , please answer me My printer konica minolta
So just curious, in my printer, when I remove one of the cartridges, it tells me I put in a used, or counterfeit cartridge, and doesn't know how many prints I have left in that cartridge. Is there a way to avoid that?
@@viandant5 an HP color laserjet printer m477. When I had removed one of the cartridges, when I was replacing some of them, I removed one that I wasn't replacing. When I put it back in, it gave me an error message stating it was either used or something and would no longer tell me how much ink it feels is in the printer. So I have no idea when it's going to run out. But before I removed it, it did tell me. So I'm just wondering if there is a way to remove one of the cartridges, clean it, and then put it back in without it thinking I "bought a used cartridge" and no longer telling me how much "ink" is left.
@@FeCAzorius Is it a compatible cartridge? the HP firmware updates have the purpose to create problems to compatible cartridges. WHen you removed it, the printer detect it as a new compatible cartridge and send that error message
@@viandant5 Two things. 1. Are you saying it only provides that error if you pull an official cartridge and not on third party? 2. If I unplug my printer first, then pull out the cartridge, clean it, put it back in, will it still send that error message? On official and 3rd party ink?
Ciao, ho pulito il tamburo del toner della mia Samsung ML-2010R. Il tamburo, dopo averlo pulito, continuava a risultare sporco di toner ogni volta che lo facevo ruotare a mano. Poi ho rimontato il toner e la stampa risulta sempre sporca. Posso fare qualcosa per evitare che il tamburo si sporchi? Ti ringrazio in anticipo. Salvatore
Hello I have an hp colorlaserjet pro mgp m182n that uses hp 216a color toner cartridges . The problem I am facing is that whenever I replace drum of black cartridge , it's intensity of black in every print increases, slight outline of black comes around some words and whole page is kind of blackish. This happens with every new drum. Can you kindly tell cause of this issue and how can that be solved?
@@viandant5 dezenfektan sıktım, mis gibi oldu aklımızda bulunsun 😅 leke falan kalmadı. Teşekkürler bu arada.🥰 Her dilde videoları izleyerek işi bedavaya getirdim. 😇
My printer is printing magenta coloured lines all over the paper, i looked at to er cartiages and my magenta color drum is not clean like the rest, it has magenta color kines on top of it, so will cleaning that solve my problem? And also how do i take the magenta color toner drum out ?
@@viandant5 it's hp laser jet cp 2025, I opened the carriage box and it looks like the magenta powder is overflowing . Like there is magenta powder on the toner but other colored toner are totally clean.
For those who don't understand: you can touch the edges of the drum near the gears, that part is not involved in the printing process. do not touch the central part of the drum unless you are wearing clean gloves.
Thank you, I just cleaned our company's printer and it works perfectly! Your video saved us! (Considering that my boss planned to get a new printer because there was a sticky substance on the drums...)
This made a huge difference for my HP4L with a new unopened (but very old) cartridge that was streaking!
HP 4L, I remember it. very old printer
@@viandant5 the same for my 35mb-usb-lan converted (parallel) hp laserjet 6p
At a previous job, I used to do a very similar thing to a commercial sized Xerox copier. We would run so much paper through those machines it would take no time at all until the paper started streaking badly.
Very useful and practical video. Had a question. If there are bands of color toner on the transfer belt, is it a drum problem or transfer belt issue? I cleaned the transfer belt, but when I I print again after cleaning the belt, it shows up again on the transfer belt and also on my print. Any suggestions?
I think it's a transfer belt problem. if the bands are vertical probably the wiper blade
Thank you so much@@viandant5 for your feedback. Appreciated that. Is the viper blade something that I could replace or just replace the transfer belt? It is a OKI 920 wt printer.
@@georgezachariah8332 Yes it could be replaced but I think it's difficult to find. May be on alibaba. However without checking the printer I can't be sure
Thank you. You do some great and valuable service to us by sharing your knowledge @@viandant5 . God bless you
Hello- I replaced the transfer belt and I am still getting the bands of color toner on the transfer belt. Can you think of anything or have any further suggestion? @@viandant5
Electrical contact circuit cleaner spray contains isopropyl alcohol . It also evaporates very quickly and you can get it from most Car Spares Stores Shop's. Just a thought if you can't easily buy the bottle version
probably it contais addittives. however better to spray it not directly on the drum
Clear and helpful video. Thank you.
thank you for the video........I have recently moved to a new place, my old xerox laser jet starts printing dark shadow on both edges of the paper. Will this solve the problem?
I don't know the modeò of your printer but I think you can try
Used by wife's nail polish remover which is isopropyl palmitate. It removed the green coating from the drum and ruined my drum. lol. Time to buy a new one
😂 I just ruined mine too don't worry... 36€ on Amazon ✌🏻
@ same lol. Mine was about 7 years old and thousands of pages so probably needed another one anyway 🤷♀️. I did come here and got the opposite of help though 😅
😄😄
Hi! first of all thanks for the videos, very helpfull. 👌🏽
I have a problem with my brother l5100 dn. Its printing dots in the center of the page. When i started the duplex print, the front page is perfect but in the back starting to appear some dots. Then in the next one seems to accumulate the dots. The problem increase whit more printed pages, the back pages have more dots than the front ones.
I allready clean the drum with 40% restant of life and bought a new original toner.
At the extremes the fuser looks wrinkled, could be that?
Thanks!
yes it could be a fuser problem especially if increase whit more printed pages
@@viandant5 Yep, the pressure fuser roller has a fold that goes through the entire roller. I clean also the fusor film and the interior. This is a second hand printer (20.000 pages) with no maintenance at all.
I think the problem started when the residual toner started to fall into the printer, since the container was full. Took the bearings and I spent like 1 hour removing all the toner they had inside. Maybe these clogged bearings caused the roller fold, because with 20,000 impressions they shouldn't fail yet, should they?.
I installed the same cleaned pieces and improve the quality, but the still appearing when i used the duplex function, perhaps the pressure roller is enlarged by the heat of the fuser.
Thanks for answer!
@@Omartic0 the fuser could make around 30000 pages so i think it could be defective. cleaning a defective roller does not solve the problem
Finally this video saved me! Thanks for sharing
I don't have any toner at hand so is it quite safe to skip the last step to apply toner to the drum or is there an alternative step?
yes it's not a problem if the drum is turning normally
Thanks! Short & cripsy clear to understand
worked perfect, i had a piece of a label stuck on the drum.
can i clean the whole cartridge and refill with another color? would that work?
yes but it depends on which toner you use to refill the cartridge
how to susing alcohols for printers and clin
Hi I'm trying to resuscitate a Samsung CLP356W printer after few years of no use. Cleaning the drum as per your instructions works ok initially but rotating the drum it gets very dirty again (toner powder not grease or else) and it keeps like that even rotating several times.Is it normal or should I assume the drum unit is too dirty inside and needs to be replaced? Thank you for help.
MAy be the wiper blade is too old, or the toner cartridges are defective or low of toner
@@viandant5 thank you for your prompt answer
Thank you on your video, my problem was solve on my printer
Can I use nail remover?
no it will ruin the drum
Hi , I need to help
I have been do every think you say it in the video then when i turn the printer on there is message say "Install the Imaging unit" and i have tay every and still like that , please answer me
My printer konica minolta
but which konica minolta?
@@viandant5 Konica minolta 3850C / 3350C
@@viandant5 Konica minolta 3850 / 3350
So just curious, in my printer, when I remove one of the cartridges, it tells me I put in a used, or counterfeit cartridge, and doesn't know how many prints I have left in that cartridge. Is there a way to avoid that?
which printer and what do you want to avioid? the error message?
@@viandant5 an HP color laserjet printer m477. When I had removed one of the cartridges, when I was replacing some of them, I removed one that I wasn't replacing. When I put it back in, it gave me an error message stating it was either used or something and would no longer tell me how much ink it feels is in the printer. So I have no idea when it's going to run out. But before I removed it, it did tell me.
So I'm just wondering if there is a way to remove one of the cartridges, clean it, and then put it back in without it thinking I "bought a used cartridge" and no longer telling me how much "ink" is left.
@@FeCAzorius Is it a compatible cartridge? the HP firmware updates have the purpose to create problems to compatible cartridges. WHen you removed it, the printer detect it as a new compatible cartridge and send that error message
@@viandant5 Two things.
1. Are you saying it only provides that error if you pull an official cartridge and not on third party?
2. If I unplug my printer first, then pull out the cartridge, clean it, put it back in, will it still send that error message? On official and 3rd party ink?
@@FeCAzorius Hp make everything to create problems to compatible cartridges, especially when you update the firmware
Sir in my printer hp1015 the new cartridge Q2612A gets jammed stopping the printer what can be the reason???? Please reply.
Are you sure the drum is turning freely and the cartridge is correctly installed?
How do i get toner to lubricate the drum after cleaning?
from the toner roller for example. you don't need too much toner
Help! I clean the drum but now I can't put back the "toner cartridge lock release lever" the box where the toner goes. Please help me out.
difficult to say without knowing which machine do you have, probably it's broken
I was reinserting it wrongly, my son helped me it's working perfectly. Thank you for getting back to me, I have a Sharp 237
THANK YOU, you helped a lot!!!
Worked perfectly! Thank you!
your videos are so good and informative
Very helpful. Thank you so much.
Ciao, ho pulito il tamburo del toner della mia Samsung ML-2010R. Il tamburo, dopo averlo pulito, continuava a risultare sporco di toner ogni volta che lo facevo ruotare a mano. Poi ho rimontato il toner e la stampa risulta sempre sporca. Posso fare qualcosa per evitare che il tamburo si sporchi? Ti ringrazio in anticipo. Salvatore
Forse la lama di pulizia è difettosa, oppure oòtpner ha preso umidità o è ormai vicino all'esaurimento ed occorre sostituirlo
Grazie mille per la risposta. Posso aggiungere toner nel serbatoio e verificare se riprende a funzionare bene?@@viandant5
@@SalvatoreArru-f9n Sì ma prima andrebbe svuotato il otner vecchio altrimenti se si mischia con il toner nuovo siamo al punto di prima
Perché non posso mischiare toner presi da cartucce diverse? Grazie@@viandant5
@@SalvatoreArru-f9n Il toner che rimane nella cartuccia è toner di scarto, comunque mischiare due composizioni chimiche diverse non dà buoni risultati
i have ricoh 2014ad printis coming light pls tell me the solution
mp2014? it could be the toner unit, a worn drum, difficult to say it exactly without checking the machine
How do I get that toner dust?
from the toner roller. very little is needed
Svp c'est quel produit vous utilisez
isopropyl alcohol
Hello I have an hp colorlaserjet pro mgp m182n that uses hp 216a color toner cartridges . The problem I am facing is that whenever I replace drum of black cartridge , it's intensity of black in every print increases, slight outline of black comes around some words and whole page is kind of blackish. This happens with every new drum.
Can you kindly tell cause of this issue and how can that be solved?
In the control panel there are the settings
@@viandant5 can you tell why this problem occurs?
Also what do I have to do in control panel?
@@hathakker802 Set the brightness to low
@@viandant5 can please tell the cause/reason for this to happen? Is it a problem?
@@hathakker802 Every toner has its own settings, when new often prints darker
su işe yarmaz mı ya da kolonya mesela?
water will not remove most of the dirty as grease or adhesives
@@viandant5 dezenfektan sıktım, mis gibi oldu aklımızda bulunsun 😅 leke falan kalmadı. Teşekkürler bu arada.🥰 Her dilde videoları izleyerek işi bedavaya getirdim. 😇
important information, thank you.
what happens if you touch the drum with your finger?
probably nothing but may be your fingers are dirty and you have to claen the drum with isopropyl alcohol
Can 70% ethyl alcohol be used?
yes
@viandant5 thank you..
Ciao Ho una samsung m2026w e vorrei pulire il rullo vicino al tamburo, come posso fare senza smontare l'intera cartuccia?
Quale rullo? il rullo di trasferimento?
How to get the drum or cartridge out of the printer?
which printer?
@@viandant5 Thanks, I figured it out. Printer is Laser Jet Pro M203dw.
@@johnstanley7874 remove the toner
support.hp.com/us-en/document/c05194920
then remove the drum
My printer is printing magenta coloured lines all over the paper, i looked at to er cartiages and my magenta color drum is not clean like the rest, it has magenta color kines on top of it, so will cleaning that solve my problem? And also how do i take the magenta color toner drum out ?
I don't know which is your printer so it's difficulr to say. may be it is damaged.
@@viandant5 it's hp laser jet cp 2025, I opened the carriage box and it looks like the magenta powder is overflowing . Like there is magenta powder on the toner but other colored toner are totally clean.
If it over can I refill it
yes sure
非常实用的教程，多谢
Perfect Bro
Can j use water instead
water will not clean the drum very well
That was amazing thank you
Great! It worked.
Thank you
Thanks
Your own voice is better 🙂
THANKS BRO!
Jast Courts
😢francais merci
Activate the French subtitles, they are available
Didnt help 😢
It was dirty, but removing the powder didn't change anything, it still leaves long slightly noticeable marks all over the sheet...
The cleaning does not work if the drum is defective
Probably highest percentage concentration isopropyl is best eh? 99%
may be but 90% is enought
THX a lot~~~~