Instead of using a premixed aqua regia, you could have controlled the amount of Nitric and not had to denox anything. A bit of salt would have dropped any other base metals and you'd filter then, twice through the same filter. All you'd have left is liquid gold, and dropped with powdered smb. Wash off with hydrochloric, then water trading off
i was thinking it's better to use dmg with cold water for more fast precipitation ? are you agree with me ? and seconde question what did you use to precipitate gold if pgm's are presente fe2so4 or other ? thank you
Hello sir . I have a question can you help me ! I'm refning gold 23k include ( 96% au, 4% ag) . I'm precipitate by smb and washing by hcl in 10minutes but my result is 999.5 . Do you have any advice for me to achieve 999.9 ? Looking forward to your reply ! Thank you and have a nice day !
After the smb precipitation and washing, redissolve the gold and use oxalic acid or sodium nitrite to precipitate it again (this should eliminate any PGMs if present)
Thank you very much for this information, please what are the smelting materials, I have a problem with gold smelting, as it stains all the edges of the melting pot and evaporates What is the problem .
You don't seem to understand me. I'm talking about melting gold chloride into a shiny, 24-karat solid metal The problem is that gold chloride evaporates It leaves a brownish tint on the immediate edges. Note that I was only adding with the borax Is there an ideal way so that the gold chloride does not evaporate during smelting?
Sir, some time I add sodium sulfite, gold already precipitate then I drain and add water to wash it then gold re dissolve, and some time add sodium sulfite gold not precipitate the colour chang to dark-orang and then aqua regia very cool and gold not precipitate. Do you know the reason?
You used too much nitric acid. Warm up the solution then add sulfamic acid to DeNOx the solution then add sodium metabisulfite, after the gold has dropped remove it from the solution and boil it in distilled water
عند إضافة حمض السلفاميك إلى الماء الملكي يتفاعل مع حمض النيتريك الحر ويحوله إلى حمض الكبريتيك الذي يترسب الرصاص على شكل كبريتات الرصاص. تتم تصفية كبريتات الرصاص وهذه هي الطريقة التي تتم بها إزالة الرصاص من المحلول الخاص بك.
Добрый день подскажите пожайлуста как и и прокапать золото чтоб вышли шарики как дробь видел ваш коммент у аргидуса электрика видимо вы с ним контактирует ему такой же вопрос задал
Good stuff mate, I’m currently in a location where I can’t do any refining and as such I’m watching all of you to sustain my cravings *edit: my awful spelling
Instead of using a premixed aqua regia, you could have controlled the amount of Nitric and not had to denox anything. A bit of salt would have dropped any other base metals and you'd filter then, twice through the same filter. All you'd have left is liquid gold, and dropped with powdered smb. Wash off with hydrochloric, then water trading off
Thanks for the tip
Very nice tip bro. Thanks 👌👌
Thats great thanks man ,can you tell me which salt
with salt u mean sodium hydrogen sulfate?
Sir, when SMB is added to the aqua regia, the aqua regia turns a deep red color. Which metal is it indicating?
I don’t know, could be platinum, what was your starting material
@@OwlTech333 A stone that was originally from rock and likely contains minerals.
@@navrangstudio8273 sorry no experience with ores
@@navrangstudio8273 sorry no experience with ores
i was thinking it's better to use dmg with cold water for more fast precipitation ? are you agree with me ? and seconde question what did you use to precipitate gold if pgm's are presente fe2so4 or other ? thank you
I dissolve DMG in NaOH solution, as for the PGMs I use either oxalic acid or sodium nitrite
Hello sir . I have a question can you help me !
I'm refning gold 23k include ( 96% au, 4% ag) . I'm precipitate by smb and washing by hcl in 10minutes but my result is 999.5 . Do you have any advice for me to achieve 999.9 ? Looking forward to your reply ! Thank you and have a nice day !
After the smb precipitation and washing, redissolve the gold and use oxalic acid or sodium nitrite to precipitate it again (this should eliminate any PGMs if present)
@@OwlTech333 thank you so much i will try and let you know result !
What is "SMB" solution?
Sodium metabisulfat
Sodium metabisulfite
@@OwlTech333 Thanks!
@@МихаилГунченко-н6ь Thanks!
Hi how to settle down gold from ar solution containing also pg metals?
with sodium nitrate: ruclips.net/video/hqJY5rCBsWY/видео.html or oxalic acid: ruclips.net/video/okYJ4M_ZSL8/видео.html
@@OwlTech333 if i add just smb?
It will drag down Pt and Pd
Excellent video thank you!!! Happy new year!!! Nice to see creators working together
Thank you very much for this information, please what are the smelting materials,
I have a problem with gold smelting, as it stains all the edges of the melting pot and evaporates
What is the problem .
Melting or smelting? Gold metal or gold salt? I seriously doubt you can evaporate metallic gold with oxy propane torch
Hi! I dont find the same open fire cuppeling tray furnace and melting furnace but do you know product that works the same as yours that i can find?
You don't seem to understand me.
I'm talking about melting gold chloride into a shiny, 24-karat solid metal
The problem is that gold chloride evaporates
It leaves a brownish tint on the immediate edges.
Note that I was only adding with the borax
Is there an ideal way so that the gold chloride does not evaporate during smelting?
Reduce the gold chloride to gold metal and then melt it
Hello friend, I hope you are well. I would like to ask you, does vitamin C precipitate palladium from a solution that also has base metals?
Yes
@@OwlTech333 if vit c recover pd then the citric acid 2 ?
@@giorgosxyrichis3630 no
@@OwlTech333 👍👍
Sir, some time I add sodium sulfite, gold already precipitate then I drain and add water to wash it then gold re dissolve, and some time add sodium sulfite gold not precipitate the colour chang to dark-orang and then aqua regia very cool and gold not precipitate. Do you know the reason?
You used too much nitric acid. Warm up the solution then add sulfamic acid to DeNOx the solution then add sodium metabisulfite, after the gold has dropped remove it from the solution and boil it in distilled water
@@seropserop thanks, I will try that.
what saturated smb solution? i have smb powder
Add the powder in 100ml water until no more dissolves then use this solution to precipitate the gold
How to buy your gold purity testing machine I like it please send me the link to buy it and what is the name of the machine
مرحبا اخي هل ممكن ميتا سلفات صوديوم ترسب معادن مع ذهب كنحاس والبلاتين والبلاديوم وماهو المرسب الانتقائي الذهب اشكرك شرح جميل وفيديو ممتاز
Pd
اشكرك ماهو المرسب الانتقائي الذهب
I need more information about this , could you help me
@@abhishekjaggi2482 more information about what?
سلام عليكم اخي العزيز اذا كان في المحلول الملكي رصاص كيف للتخلص منهو الترسيب الذهب
عند إضافة حمض السلفاميك إلى الماء الملكي يتفاعل مع حمض النيتريك الحر ويحوله إلى حمض الكبريتيك الذي يترسب الرصاص على شكل كبريتات الرصاص. تتم تصفية كبريتات الرصاص وهذه هي الطريقة التي تتم بها إزالة الرصاص من المحلول الخاص بك.
@@OwlTech333 سلام عليكم اخي العزيز تخلص من الرصاص بل فلتر
How many degrees temperature can that gold refining jar bear?
@@amulkumar3030 200C
How long did the refining part take?
2-3hrs
Привет Мистер Сова! Огромное спасибо! А иридий удалось достать?
Привет! Иридия там не было
@@OwlTech333 но анализ в начале показывал где-то пол процента.
@@АндрейПупкин-р8лиридий был обнаружен ложноположительно
@@OwlTech333 спасибо дружище! Купеляция рулит!
Have you ever processed this material before?
Yes
@@OwlTech333 sorry. There was supposed to be a picture with that comment. But it won't let me post it.
hello, congratulations, is that solid powder gold detector sitting?
XRF gun
How much gram of sulphamic acid ?
I'm adding until the solution stops fizzing
@@OwlTech333 thanks 👍
Smb what is it
Sodium metabisulfite
what is smb
Sodium metabisulphite
If there was any of the PMG in the solution,, what is used to precipitate gold only?
Depends if you don’t have base metals you can use oxalic acid, sodium nitrite or hydrochinon
@@OwlTech333 base metals are easy somehow to remove later,, PMG is a headache!! Thank you, man
Good job my friend! 💥👍
Awesome video 💥🔥👍
Thank you!
С новым годом!! Не совсем понятно почему не сделал полное разделение ?
Я торопился в конце и не проверил, все ли золото выпало в осадок. Пришлось добавить немного пиросульфита натрия.
@@OwlTech333 Понятно . Попробуйте сначала сделать сплав Аг 70 Ау 30 после азот, - Аг . Разделение 99% И выход металлов с чистотой 99+
Emeğinize sağlık çok güzel olmuş.Usta kaç saatte eridi o maden ?
1
@@OwlTech333 teşekkürler ❤️
Thanks for this entertaining yet educational video.
Thank you for watching
It is not good idea to increase temperature of precipitated by SMB solution because gold may dissolve back to the solution
Yes if you haven’t removed completely the oxidiser…. I learned that the hard way
Привет, отлично вышло, успехов в новом году!
Спасибо! С Рождеством!
Как всегда отличная работа, даже немного скучно 😁😁😁 успехов и процветания в Новом году
Спасибо!
Добрый день подскажите пожайлуста как и и прокапать золото чтоб вышли шарики как дробь видел ваш коммент у аргидуса электрика видимо вы с ним контактирует ему такой же вопрос задал
Chao ngai. Ngai có thê chỉ giup tôi chô mua nôi lung bạch kim không ạ , tôi muôn mua nhưng đất nuoc tôi không có chô nào bán . Cam ơn !
Go, go, go! (and make more videos... great stuff!)
Thanks! Will do!
what is the meaning of the word de-noxed please
In this case - removing the active oxidising agent HNO3
Exelent job🌹Arne 🇳🇴
Thank you
Very nice Owltech always a pleasure watching your vids 👌❤
Glad you like them!
Beautiful video sir
Thanks a lot
I like the 999 Dušan mug... 😀 The white gold in the end was interesting, 85% gold but white...
Yes it takes little pd to whiten gold
Show clearly when acid is adulterated.sir
Прекрасная работа.
С меня лайк.
Успехов в дальнейшей работе
Спасибо большое!
that clean gold sponge will dissolve in boiling HCl easily
Not in HCl alone
أحسنت معلومات روعه
Parabéns 👏👏👏👏👏💎🇧🇷
The legend has returned!
Perfect 🌟 🌟 🌟 👍
Thank you!
Great to see! Happy new year
Thank you! Cheers!
So, where the iridium has disappeared?🧐 0.2-0.4%
Never been there
@@OwlTech333 XRF on 0:24-0:32 shows iridium 0.488 %
I know but it's interference false positive
You lost me when I saw you didn't have gloves on.
I do have my socks on, if that’s gonna help
Put full video.sir
I will buy the gold.sir
How much Costs this process for you? The process to refine gold, and buy The 5kg.
Costs of The chemical materiais, and The Costs of 486 chips…
فيديو رائع جدا جدا جدا جدا جدا جدا جدا جدا
I wish everyone who melts gold with an oxy/acetylene or oxy/propane torch would stop using a carburizing flame & use a neutral flame.
какие люди.) мое почтение . с новым годом. мир вашему дому.
С Рождеством!
@@OwlTech333 Вас тоже с рождеством.
You should go check out Sreetip's videos. He has a lot of good tips that might be useful.
I have already
Good stuff mate, I’m currently in a location where I can’t do any refining and as such I’m watching all of you to sustain my cravings
*edit: my awful spelling
Text on screen is much better than the robot voice. I had to mute it. Great video tho
Thank you!
999 dusan cup 😂😂😂
Yeah I got it as a gift from him
Legend
🤔😳😵💫😵💫😵💫.....short circuited my brain for a minute
Wow, came out in a sponge like an Oxalic acid drop
Está interesante pero lo necesitamos en castellano
hay subtitulos en español
Button???.....more like a belt buckle😸🤤😍......thanks owl! Nicely done👍
😂 Thank you!
Muy bueno 👍,, 🇺🇾
Gracias 👍
استاذ 👍🏾👍🏾👍🏾
No need to put a disclaimer on your video. This is not Finance, besides nobody cares. If you show it, they will do it.
Very good
Thank you!
Very nice video and information on chemistry as well... God bless
God bless you too brother
فيديو رائع
❤❤❤
Привет с новым годом удачи и здоровья
С Новым Годом!
Excelente..
Nice
Thanks
روعات
Такое бывает раз в жизни и то не у каждого, поздравляю.
С Рождеством! Спасибо!
Teşekkürler
عاشت يدك اخي العزيز
перфекто👍
Спасибо!