For the nose turning issue, just turn the screw a little bit to the right.... As for the jumpy tail - yes it sounds like the gain is set to high.. Just turn it counter clockwise to get less gain.. Hope it helps.
If it is spinning to the right or clockwise, then turn the screw closest to the center of the heli to the left or counter clockwise, a little at a time till it flies better. (The screw is the red circled screw at :34 in the movie) Hope this helps.
Thanks. Not to much longer like 3 min more. It really depends on how steady you can fly it.. More power less flight times. Happy Flying. Thanks For Watching..
Hello 2689corvette, If you go to 0:28 in the video the back one (closest to the motors) marked L/R in the video. Turn it a little at a time counter clockwise. It will never really be perfect but it will help you get close to perfect.. Hope this helped.
I have one of these and its been completely uncontrollable because of the same problem. All I did was remove the horizontal stabilizer off the right side of the tail and add 2 pieces of silicone fuel line tubing to the skids to protect them and now it flies perfectly straight, takes off straight up(used to fly backwards about 3 ft on takeoff) and hovers hands free for 10-15 seconds easy. Go figure.
very good video, i did fix my problem, thx now i just want to know whta kind of charger can i use for the transmiter, i guess is 12v but, ¿?mA, can you help me.
@byron3579 hey I just purchased a Axe cx micro and have read some negative things about them can u help me out with the removal of the right side tail stabilizer deal. I think I understand it but not 100 % on it, also I'm thinking of changing the skids
Glad it helped..
Thanks For Watching.
Your video helped me with my CX Micro, thanks!
For the nose turning issue, just turn the screw a little bit to the right.... As for the jumpy tail - yes it sounds like the gain is set to high.. Just turn it counter clockwise to get less gain.. Hope it helps.
If it is spinning to the right or clockwise, then turn the screw closest to the center of the heli to the left or counter clockwise, a little at a time till it flies better.
(The screw is the red circled screw at :34 in the movie)
Hope this helps.
Movie Edit Pro 14 is the main producing program..
Glad you liked it.
Thanks for watching.
Thank You...
Glad it helped you out.
Happy Flying
:-)
Thanks. Not to much longer like 3 min more. It really depends on how steady you can fly it.. More power less flight times.
Happy Flying.
Thanks For Watching..
They are a blast. Give them a shot. Have fun..
Thanks For Watching
Hello 2689corvette,
If you go to 0:28 in the video the back one (closest to the motors) marked L/R in the video. Turn it a little at a time counter clockwise. It will never really be perfect but it will help you get close to perfect..
Hope this helped.
I have one of these and its been completely uncontrollable because of the same problem. All I did was remove the horizontal stabilizer off the right side of the tail and add 2 pieces of silicone fuel line tubing to the skids to protect them and now it flies perfectly straight, takes off straight up(used to fly backwards about 3 ft on takeoff) and hovers hands free for 10-15 seconds easy. Go figure.
Just adjust the trims on your controler. Trim it in the direction it needs to go to stay in a hover..
Hope this helps you.
Thanks for watching. :)
great video. would u know how i could adjust my blade cx2 coaxel so it hovers clean and doesn;t yaw right or left by it self. thank u.
NIce video! YOu said that it is possible to use Blade CX2 batteries in a Axe Cx. How much is the flight itme extended? Thx.
very good video, i did fix my problem, thx
now i just want to know whta kind of charger can i use for the transmiter, i guess is 12v but, ¿?mA, can you help me.
I like that song....were can I get it?
Great vid BTW!
Thanks. Glad to help. :)
No that is not common. How bad did you crash the little thing.. :) Does it spin even if you turn off the remote???
@byron3579 hey I just purchased a Axe cx micro and have read some negative things about them can u help me out with the removal of the right side tail stabilizer deal. I think I understand it but not 100 % on it, also I'm thinking of changing the skids
mr proto cx crashed today the fly rod went missing so imed screwed until sunday